Hacking Accidently removed micro fuse

[Syn666555]

Help i accidently removed the fuse when trying to solder to point a installing hwfly i will attach picture of the point and the fuse next to it. I've tried using a heat gun to get it to get back on but it won't stick.

 

[jkyoho]

That's a 4.7k ohm resistor not a fuse, where you solder the A/CMD point wire. You can tire remove the old one and put fresh solder on both pad then put new resistor on it.

BTW, you wire seems to thick for those small component, you are likely will have the component torn broken with only small movement from the wire.

 

[djcraze]

If you applied a heatgun to that area for any amount of time above 350°C, then that CMD resistor is toast.