Hacking AC:NL 1.4 update boot error

[Deleted member 404648]

Hi, I have an old3ds with luma3ds 6.6 and a9hl, im having some problem running animal crossing (original cartridge) with the new 1.4 update, it's stuck on the loading screen... My emunand firmware is 11.2.0-35E.
Any help?

thx.

 

[romanaOne]

Is (X) Enable FIRMs and modules loading from SD selected? My Animal Crossing New Leaf would get stuck on the boot screen until I unchecked this. I only had it selected by accident, because I did not read carefully after updating Luma.

See here for an explanation of Luma features:
https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage

 

[Deleted member 404648]

Is (X) Enable FIRMs and modules loading from SD selected? My Animal Crossing New Leaf would get stuck on the boot screen until I unchecked this. I only had it selected by accident, because I did not read carefully after updating Luma.

See here for an explanation of Luma features:
https://github.com/AuroraWright/Luma3DS/wiki/Options-and-usage

wait, I have luma3ds 5.5 configuration and there's not that option

 

[YourHero]

I was having the same issue. I put luma 6.3.1 on the 3DS during the upgrade from emunand luma to A9LH Luma and it solved it for me. Could not for the life of me tell you why that fixed it. But you need luma 6.3.1 luma configuration, as it had 5.5 on mine prior.

 

[Deleted member 404648]

I was having the same issue. I put luma 6.3.1 on the 3DS during the upgrade from emunand luma to A9LH Luma and it solved it for me. Could not for the life of me tell you why that fixed it. But you need luma 6.3.1 luma configuration, as it had 5.5 on mine prior.

Where I can download luma 6.3.1 config?

 

[YourHero]

Put Luma 6.3.1 on the SD card and the config should be in the package. But I noticed updating 5.5 to 6.5 the config never changed. I just updated another 3DS to 6.6 I guess and it actually changed the config. But config file should be created by Luma on boot. If no config file exists it should boot into the configuration on boot. But I had the exact same problem as you on one of my older 3DS, it didn't update the config till I completely replaced luma on the SD card including removal of the old config.

 

[Deleted member 404648]

Put Luma 6.3.1 on the SD card and the config should be in the package. But I noticed updating 5.5 to 6.5 the config never changed. I just updated another 3DS to 6.6 I guess and it actually changed the config. But config file should be created by Luma on boot. If no config file exists it should boot into the configuration on boot. But I had the exact same problem as you on one of my older 3DS, it didn't update the config till I completely replaced luma on the SD card including removal of the old config.

Ok thanks, i will try later

 

[mikefor20]

Hold SELECT during boot to enter config on luma.... 3DS off, Hold select....keep holding it while pressing power. Let it go when you see options.

 

[YourHero]

Hold SELECT during boot to enter config on luma.... 3DS off, Hold select....keep holding it while pressing power. Let it go when you see options.

You aren't getting the issue. He updated Luma like me but even though luma was newest, it had the old config. I had 6.5 with a 6.3.1 before and my other 2 3DS had 6.6 with a 5.5 config.

 

[Deleted member 404648]

ok, I updated the config and now it's working! Thanks to everyone