Homebrew a9lh still active / installed ?

  • Thread starter Thread starter nakion
  • Start date Start date
  • Views Views 1,488
  • Replies Replies 12

nakion

Active Member
Newcomer
Joined
Feb 23, 2017
Messages
40
Reaction score
2
Trophies
0
Age
44
XP
135
Country
Gambia, The
hello

i have a9lh + luma 6.6, how can i tell if the a9lh hax is still in place / active / installed ?

if i boot the console without the sd card and hold start button to get to luma config ?

if not how ?
 
You get luma's config with select, not start.

If you have a9lh v3 or less booting without the SDcard will shutdown the console.
If you have a9lhv4 and have CTRNAND luma you'll still be able to boot without and SDcard as a vanilla console would, but pressing SELECT on boot will still bring up luma's config menu.
 
so that means a9lh is still installed / active ?
I believe booting with the most recent a9lh without an sd card (or at least no luma on the sd card) then, thanks to ctrnand, it will boot an emergency cfw that's barebones, but will still net you boot0/1 protection and signature patching.
 
i just checked it , without the sd card inserted i have the luma cfg with holding select and in system settings it shows sys 9.2....

so im on luma and a9lh is still active right ?
 
because gateway , ive also an emu nand on 11.2 :)

btw if i delete arm9loaderhax from ctr nand , what does boot instead and with which key combo ?
If you delete it , the console will not power on completely on next boot since the payload is missing, First it searches SD and if not found searches CTRNand for arm9loaderhax.bin. If both missing the system powers off.
 
If you delete it , the console will not power on completely on next boot since the payload is missing, First it searches SD and if not found searches CTRNand for arm9loaderhax.bin. If both missing the system powers off.
or if one is corrupt it does the same
 
  • Like
Reactions: Xiantyl

Site & Scene News

Popular threads in this forum