Search results

  1. FXDX

    Hacking Hardware How to solder Kamikaze Dat0 point?

    after you have drilled and you gave it DAT0 point, clean it well with isopropyl alcohol, apply flux and with the thin tip from the soldering station dot a little tin. Flux is the key and the thin tip of the soldering station !! Don't forget after to apply the UV mask.
  2. FXDX

    Swap OLED Tegra SoC & eMMC from a donor board !

    Thx Bro !
  3. FXDX

    Swap OLED Tegra SoC & eMMC from a donor board !

    I bought the board from ebay, someone who tried to expose his DAT0 alone at home without the necessary knowledge, without experience through the kamikaze method and failed by sectioning several layers. The price was ok and I was lucky that Tegra and eMMC were ok!
  4. FXDX

    Swap OLED Tegra SoC & eMMC from a donor board !

    You are right....It's an Frankenstein OLED:rofl2::rofl2:
  5. FXDX

    Swap OLED Tegra SoC & eMMC from a donor board !

    Story In short. I received a modded OLED with a Hwfly modchip in the service, in which, for unknown reasons, the Tegra SoC processor shorted out, with no chance of repair. The only chance was to swap the Tegra processor and eMMC memory from a defective OLED donor board. I removed the two paired...
  6. FXDX

    Oled Picofly with copper pad DATO point, using the Kamikaze method!

    I think so 1709672344 I do not recommend because it does not dig evenly. More tears....
  7. FXDX

    Oled Picofly with copper pad DATO point, using the Kamikaze method!

    MaAnt D1 with C.1.004 Extra hard milling cutters for lab use
  8. FXDX

    Oled Picofly with copper pad DATO point, using the Kamikaze method!

    Before, I always put the mosfet on the back and it worked perfectly every time, but recently I started putting the mosfet Flex Cable For Core Or SX Core Chip, on the Tegra. This way, I don't have to remove the board from the console anymore.
  9. FXDX

    Oled Picofly with copper pad DATO point, using the Kamikaze method!

    The ''kamikaze'' OLED method by which you expose the DATO alternative point, drilling up to the third layer in the board exactly as you can see in the picture, although it is very risky for an unskilled person, requiring special skills and tools, it is much easier to solder wire to that...
  10. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    The Wi-Fi chipset had to be reflowed or replaced. Does not require Tegra reball...
  11. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    It's good. Be careful how you insulate well with the UV mask.
  12. FXDX

    Picofly AIO Thread

    If you don't solve it with resistors, I think that, to get rid of the slow eMMC message, change the eMMC memory with a Samsung eMMC KLMCG4JETD-B041S. SKhynix eMMC is of poor quality !
  13. FXDX

    Oled Picofly with copper pad DATO point, using the Kamikaze method!

    Picofly Tiny mod to switch Oled, with "Facelift" (copper pad) DATO point, using the Kamikaze method!. The tool used for drilling is MaAnt D1 I put the mosfet on the back of the motherboard. I also used a copper pad for the DATO point. I also put the SDA and SCL wires for a more stable glitch...
  14. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    "Facelift" DATO point using the Kamikaze method.:evil:
  15. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi Guys. I'm attaching my first Picofly Tiny mod to switch Oled, expose the DATO point using the Kamikaze method. The tool used for drilling is MaAnt D1 I put the mosfet on the back of the motherboard. I also put the SDA and SCL wires for a more stable glitch. Everything went well without any...
  16. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    Do you have a soldering diagram on the board for it? thx
  17. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    Picofly soldered on V2 with mosfet on the back pcb. Excellent glitch time.
  18. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    That's right, it is. Thx🙏🤟
  19. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    Exactly as @twins333 said, the glitch time is excellent to hekate in less than a second and Sysmmc/atmosphere boot is normal, no lag😘
  20. FXDX

    Hacking Hardware Picofly - a HWFLY switch modchip

    Picofly soldered on Oled with mosfet on the back pcb. I took the mosfet from the defective connection ribbon of one Hwfly. I used some thin copper wire to solder on the capacitor and loaded it with more tin. Excellent glitch time.
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: Prowl was the autobots inside man... lol