Search results

  1. MrBerzerk

    Hardware Absolute fix to 160-1400 error

    I had this happen to one of my Wii U's. I took it to a cell phone repair shop. Just the board. He replaced both chips for $20CAD. He said "I can bypass them, or you can get another 5-6 years out of new ones, and maybe never have to replace them again.
  2. MrBerzerk

    Hardware Absolute fix to 160-1400 error

    My Wii U just started getting this error yesterday. I have no continuity on the right side of CM9 and CM10. Am I supposed to have continuity on all 4 lines? I want to fix this, as it is my launch Wii U, and I have quite a few digital purchases on it.
  3. MrBerzerk

    Hacking Homebrew ROM Hack Tutorial Wii U has no video signal, and no game pad synced - How I fixed it.

    Well, it was booting twice. It would go through the DVD check twice. It only does one DVD check now. Yes, it was unsynced, and it was the buyer who unsynced it. When I factory reset it, I went through the setup process and made a Mii called 'owner'. I do that with any Wii's WiiU's I sell. So...
  4. MrBerzerk

    Original XBox Soft Modding TIP for formatting USB thumb to be an XBox Memory Unit.

    I know, I had the correct thumb drive.
  5. MrBerzerk

    Original XBox Soft Modding TIP for formatting USB thumb to be an XBox Memory Unit.

    Wow this post has been viewed over 1000 times. Hope I saved a few of those people some head aches.
  6. MrBerzerk

    Hacking Homebrew ROM Hack Tutorial Wii U has no video signal, and no game pad synced - How I fixed it.

    I talked to the buyer, and the reason the gamepad wasn't synced was because she couldn't get the gamepad to detect the WiiU, because it wasn't booting right, so she pressed the sync buttons. (This was an un-modded Wii U.) The only thing I can figure is that "I" factory reset it, then turned it...
  7. MrBerzerk

    Hardware Wii U turns ON but no video

    My issue was that my Wii U wasn't even booting far enough to turn on a video signal through hdmi or RGB. I don't know how it fixed it, it just did. Once I booted to the SDCard, the video signal started working again, and I was able to fix the console using the UDPIH method. I was operating...
  8. MrBerzerk

    Hacking Homebrew ROM Hack Tutorial Wii U has no video signal, and no game pad synced - How I fixed it.

    Yes, but there is no mention there of 'no video signal' or 'bad battery'. That is why I re-posted with this title. So people would find this when googling "no video signal wii u" If the OP of that post wants to mention this in his original post, then we can merge it all in one.
  9. MrBerzerk

    Hardware Wii U turns ON but no video

    Hey guys, I figured I'd put this here, for anyone else that googled. Make sure you have a fresh battery in your Wii U, and then follow this. https://gbatemp.net/threads/wii-u-has-no-video-signal-and-no-game-pad-synced-how-i-fixed-it.646731/
  10. MrBerzerk

    Broken Wii U with blue light and no video

    Did you try changing the battery? A dead battery will prevent this method from working. I fixed mine with the exact same issue as you, but my battery was also dead. https://gbatemp.net/threads/wii-u-has-no-video-signal-and-no-game-pad-synced-how-i-fixed-it.646731/
  11. MrBerzerk

    Hacking Homebrew ROM Hack Tutorial Wii U has no video signal, and no game pad synced - How I fixed it.

    Recently I had a Wii U that I was selling (I'v got 4 of them,) and the buyer got back to me right away, and said I sold him a brick. I was like "No I didn't. It worked fine a couple months ago, before I put in storage for sale." Long story short, I gave the buyer a different one, and took this...
  12. MrBerzerk

    Hacking Best way to crack this XBox 360 specifically?

    I've never cracked a 360 before, and I can't make heads or tails of all the 'turorials' out there that are out dated, or bogus, or malicious, or just down right wrong. Can anyone direct me to a modern, legitimate way to crack THIS 360 I got for $12 at a Salvation Army?
  13. MrBerzerk

    Original XBox Soft Modding TIP for formatting USB thumb to be an XBox Memory Unit.

    My problem was, that didn't work, because it doesn't do a full format. It ends up creating two parallel partition tables on your USB. One seen by your XBox, and the other seen by your PC. The full format is the key.
  14. MrBerzerk

    Choosing a bios for soft modded Original XBox...

    Cleaned it all off. With how bad it was, I don't think it would have lasted much longer...
  15. MrBerzerk

    Choosing a bios for soft modded Original XBox...

    Thanks for the warning about the clock cap. Do I need to clean this off?
  16. MrBerzerk

    Choosing a bios for soft modded Original XBox...

    Aahhh, I never removed the clock cap. What was the problem with that cap? What issues did it cause (besides burning out)
  17. MrBerzerk

    Choosing a bios for soft modded Original XBox...

    I worry that since the caps exploded, it wasn't the adaptors, but the PSU.
  18. MrBerzerk

    Choosing a bios for soft modded Original XBox...

    Thank you, that was very helpful. I have two of these original XBox. One is a V1.6 Mother Board, the other is a V1.0. I managed to put an ADATA 480GB SSD in the V1.6 with an adaptor I had several of. Since the newest build of the soft mod tools supports Partition tables, it was breeze, and now...
  19. MrBerzerk

    Choosing a bios for soft modded Original XBox...

    Can you install a custom bios on a soft modded xbox? If so, how do you know which one to use. Where do I get said bios. What tool do I use? I already have the custom dashboard, but I want to install a 500GB HD, and I can't do that with a stock bios. Thanks.
  20. MrBerzerk

    Original XBox Soft Modding TIP for formatting USB thumb to be an XBox Memory Unit.

    Well, I FINALLY got my Original XBox soft modded. 20+ years of chats and forum posts, and 'tutorials', that all just said "This works", when it doesn't ever mention the ACTUALL solution for formatting your memory card. So I thought I would post it here, so people don't have to go through the...