Moba Vibration Tool - set custom vibration levels to mobapad controllers | GBAtemp.net

Dekopon - (Mostly) Fullspeed 3DS Emulation on Nintendo Switch

PalindromicBreadLoaf · 2026-07-16T19:11:42+00:00

Credit goes to StickyMangoRice for the logo. Dekopon is a port of Azahar to the Nintendo Switch. The current release is version 2.2.1. Performance is very title dependent, and will be improved with time, but many games can be played fullspeed right now, sometimes even with stock handheld clocks. (I do recommend at least bumping the CPU up to dev unit clocks in handheld just to reduce shader compilation stutter and smooth out some rough frame pacing.) Depending on the game, you can get up to 4x resolution scaling at full speed in docked/handheld charging (although really 3x is all you need in handheld). If you want to try any new3ds exclusive games, they won't run well. All four of the 3DS' cores run on a single emulation thread, so we're at a 1.2GHz difference (2GHz single core where as the 4 3DS cores each run at 804MHz) from what we would need (and architecture changes from 3DS to Switch cannot account for that much raw clock speed loss). The solution would be to split the emulation threads on new3DS games, but that's a ton of work for very very little gain. See here for a full compatibility chart: Dekopon Compatibility Chart Feel free to share your own compatibility findings here and I'll update the sheet accordingly. Also share any issues you have and I'll do my best to fix them. Downloads can be found here: Releases Along with the source code here: Source ROMs default location is /switch/dekopon/roms/ All formats that Azahar natively supports are supported here too. Different screen layouts can be cycled through via pressing the right stick. Pressing '+' on a game shows information about it, including updates and dlc. Enjoy! Also if someone wants to make a better UI for this I wouldn't be offended. I can't make a good UI to save my life, but the one included at least kinda functions to get you into a game.

ToComSonoBR

Member

Newcomer

Level 1

Today at 2:15 PM

Just released Moba vibration tool, a Windows utility for adjusting custom levels to vibration feature in mobapad controllers.

The official Mobapad app only offers Low / Medium / High vibration settings, but even Low felt too strong to me. So, after reverse engineering the protocol, I discovered that the controllers support custom vibration values, allowing much finer control.

Features:

- Read current vibration level
- Apply custom vibration levels
- OFF mode
- S1 support
- M6 support (needs testing)
- M12 support (needs testing)

This is intended to be used with the S-series versions (the ones with really strong vibration). HD versions are not supported.
Since I only have an S1-S, that's the only model I've actually tested. M6 and M12 uses almost the same code, so it should work too but is experimental.

https://github.com/KickAssBR/moba-vibration-tool

If this tool helped you and you'd like to support future development, consider buying me a coffee:
https://buymeacoffee.com/KickAssBR
Thanks for your support!

Thanks!

Hacking Hardware Moba Vibration Tool - set custom vibration levels to mobapad controllers

Member

Similar threads

Popular threads in this forum