Toggle sidebar

Tutorial  Updated

PS5 Exploit Guide

PS5 Hack Status:

FW Ranges:
2.XX = KEX+HV: PS4/5 backups, possible keys exploit (WK: 2.50 best / 2.7X max)
3.XX = KEX+HV+Linux: PS4/5 backups, possible keys exploit (WK/BD/LUA: 3.20 best / 3.21 max)
4.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/LUA (Y2/NF/YARPE 4.03+): 4.50 best / 4.51 max)
5.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/Y2/NF/LUA/YARPE: 5.50 best + max)
6.XX = KEX: PS4/5 backups (KEX+HV+Linux: 6.02 max) (BD/Y2/NF/LUA/YARPE: 6.02 for Linux / 6.50 max)
7.XX = KEX: PS4/5 backups, no HV (BD/Y2/NF/LUA/YARPE: 7.61 best + max)
8.XX-10.00 = KEX: PS4/5 backups, no HV (Y2/NF/LUA/YARPE)
10.01-12.70 = KEX: PS4/5 backups, no HV (Y2/NF/LUA/YARPE)
13.XX = No KEX/UL only (Y2/LUA/YARPE)

NOTE 1: Recommended firmware is subjective. Staying low is always recommended.
NOTE 2: Do not update too many major versions (e.g., 4.xx to 5.xx or 7.xx to 8.xx). Remain low unless all you want is backups.
NOTE 3: Do not update past 12.00. P2JB can take over an hour to exploit on FW up to 12.70.

Hypervisor (HV):
Highest known HV exploit: 6.02
Highest theoretical HV exploit: 7.XX
Highest HV exploit: 1.00-4.51 (Cragson/Jordy) / 3.00-6.02 (TheFlow)
*unreleased/unimplemented

Kernel (KEX):
Highest public Release: 12.70
Highest known: 12.70 (P2JB)
UMTX2: 1.00-7.61 (*WK to 5.50 / BDJB to 7.61)
Lapse: 1.00-10.01
Poopsploit: 4.03-12.00
P2JB: 9.00-12.70 (*Use Lapse up to 10.01)

Userland (UL):
LUA (Artemis): 2.00-LATEST (LUA exploit, + Lapse up to 10.01)
Y2JB: 4.03-13.40 (YouTube exploit, + Lapse: 10.01 / P2JB: 12.70)
NFNH: 4.03-12.XX (Netflix exploit, + Lapse: 10.01)
YARPE: 4.03-12.XX (Ren'Py exploit, + Lapse: 10.01 / P2JB: 12.70)
BD-JB: 1.00-7.61 (Blu-Ray exploit + UMTX2, *8.00-13.20 via UN BD-JB + Poops to 12.00)
Webkit: 1.00-5.50 (PSFREE +UMTX2) (*up to 13.XX coming soon)
Mast1C0re: 1.00-7.61 (Depreciated for LuaC0re)
LuaC0re: 1.00-12.70 (Poops: 4.03-12.00/P2JB: 9.00-12.70)

NOTE 1: A userland entry point (UL) chained to kernel exploit (KEX) is required to exploit your console.
NOTE 2: Digital consoles can now use Y2JB+Poops (4.03-12.00) / Y2JB+P2JB (9.00-12.70).

Useful Applications:
Kstuff Lite: 3.00-12.70 HERE
Kstuff Toggle: 3.00-12.00 HERE
PS5 App Dumper: 3.00-12.00 HERE
Dump Runner: 3.00-12.00 HERE
Dump Installer: 3.00-12.00 HERE
Backporting: Possible (backpork / Porkfolio)
PS4/PS5 DLC: Work with Kstuff Lite
Trophies: Work with Kstuff Lite
Compression: Works with Kstuff Lite
Homebrew Enabler: etaHEN (3.00-10.01) latest HERE
PS5 Backup manager: ItemzFlow Compatibility list: HERE
PS4 Backup Loading: Works (rest mode & backports work, can crash).
PS5 Debug NG: 3.XX-13.XX HERE
PS5 Remote Play: Works HERE & HERE
PS5 Trainers/Cheats: Work

UART: HERE
Linux: (3.00-6.02) HERE
Kldload (wip): 3.00-6.50 HERE
Full chain exploit: 1.00-4.51 (byepervisor) HERE (also built into etaHEN up to 2.7X)
PSN access: NEVER
Latest OFW: 13.40 (04/06/26)
Summarised OFW/Model guide: HERE
1.XX-7.61 compatibility list: HERE
PS5 SDK Repo: HERE
Legit PKG Updates: HERE or HERE
OFW Updates: HERE (history HERE)

Preparing Your Console:

It is recommended to either self-host offline or block these addresses in your router to avoid accidental updates or getting an update nag. Using the DNS method is no longer failsafe, as these are not guaranteed to be running 24/7.


dau01.ps5.update.playstation.net
dbr01.ps5.update.playstation.net
dcn01.ps5.update.playstation.net
deu01.ps5.update.playstation.net
dhk01.ps5.update.playstation.net
djp01.ps5.update.playstation.net
dkr01.ps5.update.playstation.net
dmx01.ps5.update.playstation.net
dru01.ps5.update.playstation.net
dsa01.ps5.update.playstation.net
dtw01.ps5.update.playstation.net
duk01.ps5.update.playstation.net
dus01.ps5.update.playstation.net
fau01.ps5.update.playstation.net
fbr01.ps5.update.playstation.net
fcn01.ps5.update.playstation.net
feu01.ps5.update.playstation.net
fhk01.ps5.update.playstation.net
fjp01.ps5.update.playstation.net
fkr01.ps5.update.playstation.net
fmx01.ps5.update.playstation.net
fru01.ps5.update.playstation.net
fsa01.ps5.update.playstation.net
ftw01.ps5.update.playstation.net
fuk01.ps5.update.playstation.net
fus01.ps5.update.playstation.net
hau01.ps5.update.playstation.net
hbr01.ps5.update.playstation.net
hcn01.ps5.update.playstation.net
heu01.ps5.update.playstation.net
hhk01.ps5.update.playstation.net
hjp01.ps5.update.playstation.net
hkr01.ps5.update.playstation.net
hmx01.ps5.update.playstation.net
hru01.ps5.update.playstation.net
hsa01.ps5.update.playstation.net
htw01.ps5.update.playstation.net
huk01.ps5.update.playstation.net
hus01.ps5.update.playstation.net
sgst.prod.dl.playstation.net
gs2.ww.prod.dl.playstation.net

Alternative DNS IP:
DNS 1: 172.245.146.114
(Leave DNS 2 blank)

To determine your OFW version:
Go to settings > system > console information.

Version string info:
Year.Half (1st/2nd half of the year)-Major Version No.Minor Version No.Extended info-Further Info.Retail/Debug

21.02-04.03.00.00-00.00.00.0.1

It is recommended to keep your console as low as possible to have access to better jailbreak stability and features. Stay as low as possible within the "Golden" firmware brackets that apply to your current firmware, see the top of this page.

(No jailbreak is ever guaranteed. No developer is obliged to release anything publicly)

WARNING:
Only update OFW manually via USB by getting the firmware file from HERE and installing from <USB>:/PS5/UPDATE/PS5UPDATE.PUP
(Updating with RECOVERY PUP will perform a factory format and will wipe your internal HDD)

KEY SYSTEM UPDATES:

12.70 SYS MD5: 707B15B07085500EB90205565751ECC3 (Exploited + KEX)
10.01 SYS MD5: 68A31944C1867BF9643798FD1C14998E (Exploited + KEX)
7.61 SYS MD5: D5ECA8B171A8D7DF7BA225167F77E645 (Exploited + KEX)
6.02 SYS MD5: 17b271DE081EB6EB25DBF70CB73EF9E8 (Exploited + KEX/HV/Linux)
5.50 SYS MD5: EDB3513EC531B2BD28F3A0B52A82A54F (Exploited + KEX/HV/Linux)
4.51 SYS MD5: 1330B7BF63BF5C93D809B1EB1F4E1F01 (Exploited + KEX/HV/Linux)
4.03 SYS MD5: 3716E4E6E0D223CD94CD4A8E5BD4FB94 (Exploited + KEX/HV/Linux)
3.20 SYS MD5: (F62F0D595D3F00C213D674D4DB2A7E44 (Exploited + KEX/HV/Linux)

PS5 factory mode PUP installation path:
/usb/PROSPERO/UPDATE/PROSPEROUPDATE.PUP

NOTE: Make a system back up before attempting any modifications.
On console: go to [Settings] > [System] > [System Software] > [Back Up and Restore] > [Back Up Your PS5]

Select Your Jailbreak:

WEBKIT:BD-JB:LUA:Y2JB:NFNH:YARPE:LuaC0re:BD-UN-JB:


  1. Information:
    Firmware 1.00-5.50 is required for webkit exploit.

    Enabling web browser:
    Open [Settings] > select [Users & Accounts] > select [YouTube] > click "Link" > click "use browser" > click "terms" (bottom right) > click google apps icon (top right) > select Google Search.

    Exploiting:
    Enter https://zecoxao.github.io/luasauce/ or https://github.com/kmeps4/PSFree into google > "Click Jailbreak" or wait for it to complete.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  2. Important:
    You will need a BD dive paired to your Slim/Pro console or an OG Phat model . Consoles must be on 1.00-7.61 to run this exploit.

    Recommended ISO: Viktorious AIO Auto BD-JB ISO for 4.XX-7.61

    Exploiting:
    1, Burn ISO to a blank BD-R or BD-RE > Insert into console > click on the [DISC PLAYER] icon.

    2, Highlight [PIPELINE RUNNER] > click option 2 [Normaljailbreak-etaHEN-UMTX1.pipe] to auto load etaHEN ready for ItemzFlow.

    ELF Loader uses PS5 IP: port 9021 / BIN loader uses 9020 / Jar loader uses port 9025

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  3. Important:
    LUA entry point works from 2.00 to the latest OFW, but there is no KEX above 12.70 yet.
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Your PS5 console must be activated to use save copying for PS4 games.
    1. Insert your game disc and, as soon as possible, make a save file within it.
    2. Copy the save files to USB, go to [SETTINGS] > [STORAGE] > [CONSOLE STORAGE] > [SAVE DATA] > [PS4 GAMES] > select the game save and copy to a USB drive.
    3. On PC, using a Google Drive account, make a new folder with the GAME ID of your game, and upload the savedata & savedata.bin files to that folder.
    4. Share the folder, set it to editor mode, share with anyone, and click "copy the link".
    5. Join the HTOS Discord group: HERE type "/decrypt", select "FALSE" for including SCE_SYS, paste or type in the Google Drive link, and press enter. The bot should begin mounting your save. (If it doesn't, paste in the link again.)
    6. Click "ENCRYPTED" to remove the Sony PFS layer. Download the generated files and extract the folder to your desktop (you should have 4 files in there and be named dec_savedata_CUSA[GAME ID]).
    7. Using REMOTE LUA LOADER, open the savedata folder, copy the 20 files within into your encrypted save folder on your desktop.
    8. Upload the encrypted save folder (now with 24 files in) to your Google Drive. It should be named "dec_savedata_CUSA[GAME ID]" where GAME ID is your games 5 digit number, and set it to editor mode, share with anyone, and then click "copy the link".
    9. Go back to the HTOS discord server, and type "/encrypt", hit "FALSE" for uploading individually, and "FALSE" to include SCE_SYS. Finally, hit shared_gd_link and paste in your link to the original save (4 files) folder. (If it doesn't, paste in the link again.)
    10. When this is done, paste the link to the decrypted save (24 files) folder, and the bot will encrypt the files.
    11. Resign the files by typing "/resign" followed by your account name on the console, or PSN ID associated with that account if using the latest OFW.
    12. Download the resigned files, extract the files to your USB drive and overwrite them into the savedata folder on your USB or external drive.
    13. Copy the saves back to your console [SETTINGS] > [SAVE DATA AND GAME/APP SETTINGS] > [SAVE DATA PS4] > [COPY OR DELETE FROM USB] > [COPY TO CONSOLE STORAGE] > select your game save folder from the USB drive and copy/overwrite old save data.
    14. Load LUA game again, and you should see the LUA LOADER screen.
    15. You can use "SEND_LUA.PY" to send the UMTX files to the loader.
    (NOTE: Some games require manual loading of save game)

    On firmware up to 7.61, you can now load UMTX/2 followed by etaHEN by sending the files to your console IP on PORT 9026.
    On firmware 8.00-LATEST, you can connect with the REMOTE LUA LOADER APP to send debug notifications or FTP on port 1337.

    LUA Loader: HERE or HERE

    Auto LUA Loader Fork: HERE

    Compatible LUA games:
    Aerial Life (CUSA17122)
    Aibeya (CUSA17068)
    Aikagi 2 (CUSA19556)
    Aikagi Kimi to Issho ni Pack (CUSA16229)
    Aikano Yukizora no Triangle (CUSA19370)
    Boku to Nurse no Kenshuu Nisshi (CUSA12049)
    Boku to Joi no Shinsatsu Nisshi (CUSA18107)
    Fuyu Kiss (CUSA29745)
    Hamidashi Creative (CUSA27389)
    Hamidashi Creative Demo (CUSA27390 requires the latest OFW to download from PSN)
    Haruoto Alice (CUSA14324)
    IxSHE Tell (CUSA17112)
    IxSHE Tell Demo (CUSA17126)
    Jinki Resurrection (CUSA25179)
    Jinki Resurrection Demo (CUSA25180 requires the latest OFW to download from PSN)
    Maid-san no Iru Kurashi (CUSA18106)
    Nora Princess and Stray Cat Heart HD (CUSA13303: Rename save9999.dat into nora_01.dat)
    Nora Princess and Strat Cat Heart 2 (CUSA13586)
    Raspberry Cube (CUSA16074)
    Winter Guest (CUSA11977)

    WARNING: using demos is free but can become corrupt, and you cannot upgrade your internal HDD either. If you lose the demo you can no longer use the exploit. Disc recommended.

    Incompatible LUA games:
    Dokyusei Remake Csver (CUSA47117)
    Dōkyūsei: Bangin' Summer - Home Edition Demo (CUSA47132)
    Kiss Trilogy (CUSA19341)
    Love Clear Demo (CUSA18109)
    Mikagami Sumika no Seifuku Katsudou (CUSA11481)
    Sen no Hatou, Arazone no Hime (CUSA09647)
    Tonari ni Kanojo no Iru Shiawase: Two Farce (CUSA09825)
    Tonari ni Kanojo no Iru Shiawase Summer Surprise (CUSA18998)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  4. Requirements:
    PS5 console must be on 4.30-12.70 and previously activated through PSN or fake activated to use the YouTube app, unless you're restoring a backup.
    (Note: restoring a backup will factory reset your console).

    Information:
    If updating and older installation, download the latest download0.dat > use FTP or PS5 Explorer to place it in the user/download/PPSA01650 folder.

    Preparation:
    Download the Y2JB_backup_X.X(4.03) if you're on 4.03-12.40, or the Y2JB_backup_X.X(12.20) if you're on 12.60 or higher from HERE
    On PC: format a USB 3.0 HDD to exFAT, and copy the PS5 folder from the backup to the root, and put the latest nanodnf.efl from nanoDNS to the root too.
    On console: go to [Settings] > [System] > [System Software] > [Back up and Restore] > [Restore] > select the y2JB back up & let it install (the console will reboot when complete).
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    Exploiting:
    Going to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection > change [DNS Settings] to manual > change [Primary DNS] to 127.0.0.1 > click [Done] > open the [YouTube App].
    (Note: Ignore and internet connection issue warnings)

    Firmware up to 10.01 will use Lapse Kernel Exploit. Firmware 10.20-12.70 and above will use P2JB and could take up to an hour.

    You can send payloads using netcat GUI to PS5's IP Address & port 9021.

    You can swap the download0.dat to itzPLK version for auto loading and payload manager in future (payload manager accessible through browser on 127.0.0.1:8084)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  5. Requirements:
    PS5 console must be on 4.30-10.01 and previously activated through PSN or fake activated. You will need a 256GB external HDD (minimum).

    Preparation:
    Download balenaEtcher
    Download the latest Extended Storage or M.2 Image (select your m.2's capacity)

    EXTERNAL DRIVE METHOD (Netflix_PS5_EU_Ext.7z):
    1a, On PC: connect your 256GB (min) USB drive to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 256GB is the smallest drive you can use)

    2a, On console: click [Settings] > [Storage] > [USB Extended Storage] > [Games and Apps] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    INTERNAL DRIVE METHOD (Netflix.XXXXGB.7z):
    1b, On PC: connect the M.2 to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 4TB will take 80 mins, 2TB 45 mins, 256GB 10 mins)

    2b, On console: Power off the console > insert the M.2 SSD > power on the console > click [Settings] > [Storage] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab).

    Exploiting:
    1a, for consoles 10.01 and below, on console: go to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection. Go to Proxy > change [Automatic] to [Manual] > enter Address: 172.105.156.37 & port: 42069 > click [Done] > open the [Netflix App].
    (Note: Ignore and internet connection issue warnings)

    1b, for consoles 10.20-12.70, COMING SOON.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  6. Important:
    YARPE works from 4.30 to 12.70 (9.00 - 12.07 via P2JB)
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Requirements:
    PS5 console must be on 4.30-10.01 to use this exploit.

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  7. Requirements:
    PS5 console must be on 4.30-12.70 to use this exploit. SWRR

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  8. Important:
    This method modifies the BD-J stack to allows BD-JB entry point to be re-enabled on consoles up to 13.40, for conveninece only.

    Very Important:
    This method requires your console to be jailbroken by another method first to gain access to alter the files.

    https://github.com/Gezine/BD-UN-JB

    Preparation:
    Burn the ISO to a blank Blu Ray, insert it into the jailbroken console. Send the bdj_unpatch.elf to elfldr using netcat GUI to PS5's IP Address & port 9021 to unpatch BD-J.

    (NOTE: DO NOT REINSTALL/UPDATE FW, IT WILL WIPE THE PATCH AND LOSE BD-JB)


Once jailbroken it is recommended to run KSTUFF LITE and SHADOWMOUNTPLUS at minimum to get you up and running.
(ShadowMountPlus: is an automated background auto-mounter payload for jailbroken PS5 consoles. Detects, mounts, and installs game dumps from internal or external storage, with support for UFS, exFAT, PFS, and nested compressed PFS containers)

Additional Information:

Blocking Updated with nanoDNS:
Set primary DNS manually to 127.0.0.1. Send latest elf to BIN LOADER using netcat GUI to PS5's IP Address & port 9021.

PS4 GAME INFORMATION:
OFW 1.xx cannot run PS4 games.
OFW 2.xx runs PS4 games up to 8.03
OFW 3.xx runs PS4 games up to 8.52
OFW 4.xx runs PS4 games up to 9.04
OFW 5.xx runs PS4 games up to 9.60
OFW 6.xx runs PS4 games up to 10.50
OFW 7.xx runs PS4 games up to 11.00
OFW 8.xx/9.xx runs PS4 games up to 11.50
OFW 10.xx runs PS4 games up to 12.00
OFW 11.xx runs PS4 games up to 12.50
OFW 12.xx runs PS4 games up to 13.00

(Note: PS4 backported FPKGs also work perfectly on an exploited PS5 with Kstuff)

You can install free/demo PKGS (legit pkgs) via the debug pkg installer, provided you have all the files/json/licences required.
(Astro’s Playroom has no licences and can be installed and played from official pkgs and updated inline with your firmware)

Warnings:

1: Never enable IDU mode.
If you do, you will need to enter staff mode by holding L1 + L2 and tapping this combo: circle, cross, square, triangle, right D-Pad. Release L1 + L2, and you can access settings to exit IDU.

2: Try to stay on the lowest FW possible and wait for hacks on that firmware.

3: PS5 FPKGs do not work. A hack for the A53 processor does not publicly exist to enable installing PS5 content as FPKG/PKG.

4: Installing legit game PKGs you do not own will never work, even if spoofed.

5: If you get stuck in a boot loop at the PS logo, the SNVS is corrupted (if the hash check fails on boot, this causes a “soft brick”). It’s not “bricked”. Simply reinstall your current firmware RECOVERY PUP in safe mode from USB: PS5 > UPDATE > PS5UPDATE.PUP.

Archived Information

https://github.com/astrelsky/libhijacker

https://github.com/illusion0001/libhijacker

https://github.com/TheOfficialFloW/Presentations/blob/master/2022-hardwear-io-bd-jb.pdf

https://github.com/sleirsgoevy/bd-jb

https://github.com/psxdev/bd-jb

https://gbatemp.net/download/remount-system-with-write-permissions.37807/

https://github.com/john-tornblom/ps5-payload-sdk

https://github.com/john-tornblom/bdj-sdk/actions/workflows/bdjb.yml
 
Last edited by KiiWii,
  • Like
  • Love
  • Haha
Reactions: johnfr13d, rogerramjet, pippihuhu and 92 others
Click to expand...
Theone5000 said:
Use it as part of your autoloader when you boot op your system. My config:

Code: 
garlic-savemgr.elf
!3000
shadowmountplus.elf
!3000
kstuff.elf
!3000
phu_overlay.elf
Click to expand...
What exactly is garlic-savemgr.elf for??

iguanoPT said:
Firm 7.61. I use etahen 2.5b and Dump installer 1.01b and RE Requiem and Pragmata both have the icon "installed" on the dashboard just fine.

I have some sound problems on RE, but it seems to be due to oink oink 🐷
Click to expand...
Game on nvme usb 10gb/s, or sata usb ssd ? Or internal m2 or internal storage?

What is oink oink? Backpork? You can try exfat version or maybe normal version and try utility for backport to your fw :)

Adam512 said:
does it need to be run after every console start, or is it enough to run it once and once I have registered trophies for one game, there is no need to run it again after restarting the console?

BTW: I read on discord that this could possibly be part of kstuff in the future
Click to expand...
maybe it will be part of goldenhen ... but who knows when it will come. one photo from two years ago, the other similar photo published recently ... but before we get the result (functional golden) it could be another two years

solitaire4eva said:
yeah I remember hearing something about keys in 3.0. I remember a dev saying dont uodate to 4.
Click to expand...
and do you know any other information? for example what keys are for etc.?


KiiWii said:
I’m sure I’ve missed heaps, I’ve been away this weekend.
Click to expand...
still 12.02-12-70 in red font. I think it could be in orange or green
 
  • Like
Reactions: KiiWii and solitaire4eva
Theone5000 said:
Trophy unlocker

PHU Games Tools v1.15.0-alpha r19.57 TROPHY MULTI-USER FIX PUBLIC

What's new in r19.57
🆕


Firmware 6.02 now supported Trophy install + unlock works on fw 6.02 too. 16 firmwares supported in total (4.03 → 12.70 PS5 Pro).

  • Fix — Trophies now show up in your profile On some consoles, trophies were installed but didn't appear in the PSN profile. Fixed. Next time you launch your game, trophies update automatically.
  • Fix — Multi-user works properly If you switch PS5 user and relaunch a game, trophies now install correctly for the new user. Each profile sees its own trophies — no more juggling between users.

On some firmwares, after quitting a game, wait a few seconds before relaunching it. Trophies are local — do not sync to PSN with your main account.

Firmware supported (16)
  • 4.03
  • 4.50
  • 5.02
  • 5.50
  • 6.02
  • 6.50
  • 7.61
  • 8.00
  • 9.40
  • 9.60
  • 10.00
  • 10.01
  • 11.20
  • 11.60
  • 12.00
  • 12.70 (PS5 Pro)

Link: https://cdn.discordapp.com/attachme...25183f1221897eb5ff1f9d823c2b57f3e5ee9bdd7e25&
Click to expand...
Sorry maybe dumb question but by unlocker you mean app to unlock trophies like a trainer or this mimics the default behavior and it will unlock automatically like what Sony has implemented?
 
  • Like
Reactions: SpaceMunkey and schatzi24
Davide6 said:
and do you know any other information? for example what keys are for etc.?
Click to expand...
Supposed to be something helpful for cfw or persistence. I had noticed the dev didnt want a 4.03 PS5 and he got a 3.0 in the trade. He had made it clear he didnt want to do nothing with 4.xxx cause couldnt get thr magical keys lol
 
Buddy of mine is selling a PS5 Slim with disk drive FW 11.20 patched blu-ray drive with the autoloader disc. Should I buy this or try to find a PS5 Pro with disc drive on a low FW??
 
  • Like
Reactions: schatzi24
Blythe93 said:
I never used rest mode on my PS5 5.00 with similar setup so I can't really tell where could be an issue. I'd just run jailbreak every time I turn on my console, it's very stable on my end and whenever it fails, it rarely freezes on my end, I just have to reboot and try again.
Click to expand...

Schweino said:
Are you running Kstuff Lite 1.1-dr (stable)?

https://github.com/drakmor/kstuff-lite/releases/tag/1.1-dr

Runs very stable here.



I found that when putting in rest mode while a game is running it will lead to crashes or gliches after waking up (FW 4.50, with game Split Fiction). When I close the game before putting the PS5 in rest mode all goes well.

Same also goes for powering off the PS5 when a game is still active, results in KP during shut down.
Post automatically merged:






View attachment 573971

https://docs.google.com/spreadsheet...A7e8joB2quVs/edit?gid=555801914#gid=555801914
Post automatically merged:

Also: Poopsploit 1.6 added to BDJB autoloader so now works on FW 4.03 upwards to 12.00

https://github.com/ps3120/BD-UN-JB/releases

View attachment 573974
Click to expand...



Thank you, seems like rest mode is just not reliable atm. Will just turn off when using atm until a reliable sleep is available :)
 
iguanoPT said:
Firm 7.61. I use etahen 2.5b and Dump installer 1.01b and RE Requiem and Pragmata both have the icon "installed" on the dashboard just fine.

I have some sound problems on RE, but it seems to be due to oink oink 🐷
Click to expand...
I'll have another go tonight after work and ensure i'm using the latest websrv, dump runner etc... don't use dump installer tbh but may give that a go...

Thanks!
Post automatically merged:

So according to Dr YenYenm it seems p2jb is down to nearly just over an hr now... still about 60 mins too long IMHO....

 
Last edited by BobaFett_UK,
  • Like
Reactions: Denida, iguanoPT, Silla79 and 7 others
Schweino said:
Anyone else got this Trojan warning from Windows about NetCat GUI 1.3??
Click to expand...
Previously yes. Got it from Modded Warfare his videos. False positive. I've added Netcat to my whitelist.
Here's mine: https://gofile.io/d/9ZqUtJ (Version 1.3)
Post automatically merged:

Davide6 said:
What exactly is garlic-savemgr.elf for??
Click to expand...
It's Garlic savemanager.
A savemanager to manage your PS4 and PS5 saves + more. Link: https://git.etawen.dev/earthonion/garlic-savemgr
Post automatically merged:

yonasz said:
1 hour is a lot better than 2 hours plus there is autoloader for lua loader (I hope someone make update to new fw).
Click to expand...
Indeed. As a mention a lot: small improvements, but still improvements. 1 hour is a huge step in testing, not for end users perse. Imagine if you have to test 10 times a day and wait 1 hour in between in stead of 2 hours.
Post automatically merged:

j0hnnyj0hns said:
Buddy of mine is selling a PS5 Slim with disk drive FW 11.20 patched blu-ray drive with the autoloader disc. Should I buy this or try to find a PS5 Pro with disc drive on a low FW??
Click to expand...
Lowest PRO I could find here in my country only comes with 11.60. I recently bought a slim and 2 PRO's. Also the slim had 11.60.
 
Last edited by HS2005,
  • Like
Reactions: Schweino, _iggyman_, flopsy and 3 others
Just a random FYI; :toot:

1779367450936.png


+ update from owendswang

Changelog:
There are 2 iso images in the release files.
  1. 'BD-UN-JB-NetCtrl-Autoloader.iso'
    elf files rebuilt with new SDK.
  2. 'BD-UN-JB-NetCtrl-Autoloader-Gezine.iso'
    Embeded Gezine's port of NetControl exploit 'poops_v1.6.jar' with 'autoloader'.
    Removed a lot of notifications from 'kexp.bin' and 'elfldr.elf'.
  3. The both would launch into remote jar loader if elfldr is already listening on port 9021.
  4. 'autoload.txt' and payloads embedded in the ISO image.

Link: https://github.com/owendswang/BD-UN-JB-Poops-Autoloader/releases/tag/v2.2
 
  • Like
Reactions: iguanoPT, schatzi24 and _iggyman_
Theone5000 said:
Trophy unlocker

PHU Games Tools v1.15.0-alpha r19.57 TROPHY MULTI-USER FIX PUBLIC

What's new in r19.57

Firmware 6.02 now supported Trophy install + unlock works on fw 6.02 too. 16 firmwares supported in total (4.03 → 12.70 PS5 Pro).

  • Fix — Trophies now show up in your profile On some consoles, trophies were installed but didn't appear in the PSN profile. Fixed. Next time you launch your game, trophies update automatically.
  • Fix — Multi-user works properly If you switch PS5 user and relaunch a game, trophies now install correctly for the new user. Each profile sees its own trophies — no more juggling between users.

On some firmwares, after quitting a game, wait a few seconds before relaunching it. Trophies are local — do not sync to PSN with your main account.
Click to expand...
Not working for me on 6.02, guess I'll have to wait for the integration with kstuff, still cool though.
Tried on a regular account and an offact activated account.

I get a bunch of popups, even the overlay, except the FPS counter is stuck at 0.00, temp and fan monitor work though.
 
Rasa39 said:
Not working for me on 6.02, guess I'll have to wait for the integration with kstuff, still cool though.
Tried on a regular account and an offact activated account.

I get a bunch of popups, even the overlay, except the FPS counter is stuck at 0.00, temp and fan monitor work though.
Click to expand...
There are new releases out today. When I have a bigger updated one I will share it here.

For most users it's just following the exact things from the readme.
Setup up your console with the steps that are in there. I had issues as well at first because I was not following the readme to the letter.
Post automatically merged:

yonasz said:
P2jb + Lua loader. 55 minutes to jb
Click to expand...

2 hours, 1 hour, 55 minutes. Maybe 30 minutes after. They more test there can be done in less time the better.
That's why I continue to mention. Wait 2 / 3 weeks and you have a stable version.


Other source:

PlayStation 5 jailbreak (firmware 9.00 – 12.40, tested on 11.60) — a port of Gezine / cheburek3000's p2jb kernel exploit (cr_ref overflow via kqueueex) from the luac0re (lua-loader) host to Y2JB (YouTube / V8 JavaScript host).

Confirmed working: jailbreak end-to-end + debug menu + USB-loaded elfldr_1320 + persistent unpatcher delivery.

⚠️ Status — work in progress. The in-memory jailbreak completes reliably, but closing the YouTube host app after === p2jb complete === currently kernel-panics the console. The post-jailbreak stability work is ongoing. In practice this is not a blocker if you apply BD-UN-JB right after the jailbreak completes.
Click to expand...
Firmware support: confirmed on 11.60. The bundled offsets table covers firmwares 9.00 – 12.40 (luac0re-sourced values), but only 11.60 has been tested on hardware — other versions should work in theory but are untested.
Click to expand...

Link: https://github.com/matem6/P2JB-Y2JB-Porting
 
Last edited by HS2005,
  • Like
Reactions: Schweino, Rasa39 and _iggyman_
Theone5000 said:
There are new releases out today. When I have a bigger updated one I will share it here.

For most users it's just following the exact things from the readme.
Setup up your console with the steps that are in there. I had issues as well at first because I was not following the readme to the letter.
Click to expand...
Okay thanks for the shares and updates.

I followed the instructions for the HBL version. I was using kstuff lite at first so switched back to kstuff 1.6.7 as it mentions, but still no dice.

The only thing different according to the readme in the latest release you shared, is my firmware version because it says 8.20+. Given your post and the instructions, I'm assuming it's not quite ready for lower firmwares yet, so it might be be temperamental with my particular console.

Either way it's really cool and I'm happy to wait for a full release, but it's great for people that can get it working.
 
Rasa39 said:
Okay thanks for the shares and updates.

I followed the instructions for the HBL version. I was using kstuff lite at first so switched back to kstuff 1.6.7 as it mentions, but still no dice.

The only thing different according to the readme in the latest release you shared, is my firmware version because it says 8.20+. Given your post and the instructions, I'm assuming it's not quite ready for lower firmwares yet, so it might be be temperamental with my particular console.

Either way it's really cool and I'm happy to wait for a full release, but it's great for people that can get it working.
Click to expand...
HBL has more issues in regards to shadowmount + kstuff + phu. Why not use my autoload and see if it works.

Code: 
elfldr-ps5.elf
!3000
garlic-savemgr.elf
!3000
shadowmountplus.elf
!3000
kstuff.elf
!3000
phu_overlay.elf
 
  • Like
Reactions: _iggyman_

Site & Scene News

Go to forum More news

Popular threads in this forum

11.00 or 12.00?

Ps5 migrating APU from edm 030 to edm 010 board.

PS5 Pro BLOD - UART codes 808C4F90 and C0020303. USB-C issue?

Return to stock firmware

PS5 Backports Only Work Once

ShadowmountPlus Error: Missing/invalid param.json

Homebrew  problem with uneven temperature display

PS5 FW 12.70 Jailbreak Tutorial