Recent content by postnutclarity

  1. postnutclarity

    Another Unknown pkg1 version error

    I bought it from Ali Express so that makes sense 🙃
  2. postnutclarity

    Another Unknown pkg1 version error

    I know this has been posted before and people have said it typically has to do with outdated Hekate and/or Atmosphere. The thing is, they both should be the latest version. I get my CFW from the HATS pack: And the versions are: Hekate v6.0.5 & Nyx v1.5.4 Atmosphere 1.5.4 The SysMMC works...
  3. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    Very much appreciate this. I had a creeping feeling this might be the problem, but was trying to cope that it wasn’t 🥲. Is it the black d0 adapter that’s recommended?
  4. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    Gpio pin? Which one is that? Okay, so it might be this problem then 😬 The previous technician installed the d0 adapter like this (in the picture). When I took it to the new technician, he reconnected everything, but I’m not sure he’s aware the d0 adapter was installed somewhat awkwardly.
  5. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    Can you guys please take a look at the video and help me decode what the errors are saying? It looks like a D0 problem, but I’m not entirely sure. This feels a bit different from a 2.74 firmware instability issue. It started with being able to glitch after disconnecting the batter for 6...
  6. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    Have you figured this out or at least found a pattern to the instability? I’m pretty sure I managed to boot my forward back to 2.73. Band things were gravy until I was loading some corrupted cheats on Breeze and got a 2168-0002 error (Atmosphere crashing) then the picofly is not glitching...
  7. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    So my technician replaced the pcb board with the new one and it looks just as clean as before if not better. The firmware is still 2.74 and it actually glitches inconsistently still. Currently it seems like it will glitch after disconnected the battery for about 6 hours and reconnecting it then...
  8. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    That would truly be unfortunate 🥲. Is there a way to confirm definitively? Otherwise, I do have an extra picofly pcb board. Just that it’s currently flashed with 2.74 and my understanding is that firmware version is unstable.
  9. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    I’ll see if I can get a video but my technician said either RST or D0.
  10. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    I happen to find another technician who can do micro-soldering. He wasn’t experienced with switches but like you guys, he chuckled at the work the previous guy did when I asked if he can clean it up . Looks like he really cleaned it up, what do you guys think? It now glitches! Edit: Apparently...
  11. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    He was one of the few technicians I called that had micro soldering experience/equipments. If you happen to know someone in PA or within the states, would love to get a referral :)
  12. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    Alright fellas, thanks for your inputs. I didn’t listen to some of your guys advice because I went back to my modder with the switch and it worked for a good minute. But when I went back home and fiddled around, it kinda crashed and rebooted back to OFW. I opened it up, and the error codes gave...
  13. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    I suppose as long as it’s salvageable. Should I also ask him to put the resistors flat on the board instead of it hanging out like that? So things wrong with this install I should ask to fix: - Long wires - Flux on the points - Kapton tape underneath the resistors?
  14. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    I paid $70 haha, he’s never done it before but had micro-soldering experience. How about the resistors? Aren’t they awkwardly placed? I see people place them flat on the board, but it looks like he has them kinda hanging on the side.
  15. postnutclarity

    Hacking Hardware Picofly - a HWFLY switch modchip

    Okay so you’re right, I opened up my switch and it looks like there’s a lost connection to the RST and potentially D0. Should I ask my modded to re-do the whole thing? The way he attached the resistors look different from how everyone does it.
See more