not enough information given.
softmod = atmosphere? mine works
hardmod = modchip? maybe broke something.
maybe try to see if you can reinstall atmosphere?I softmodded the switch with atmosphere and it worked when it wasnt modded
I think that is the problem. I rebooted the switch an it didnt work. Thank youIt should work unless you damaged your video chip
The problem is the switch. The other switch i have works with this dockTo be fair, it’s more likely the port is damaged, either in the Switch or on the dock. Can be tricky to get a good high quality pic of the inside of the port with good lighting, but can you try? I want to be able to see the pins…
Ok then, get a good look inside of the port with a high-res camera. Since you have another Switch, compare the two. Any pins that look even slightly higher could indicate damage (use a sewing needle or something to push down on it to see if it’s loose…)The problem is the switch. The other switch i have works with this dock
The problem is the switch. The other switch i have works with this dock
Sorry, but i dont know much about this. where are the pins located?Ok then, get a good look inside of the port with a high-res camera. Since you have another Switch, compare the two. Any pins that look even slightly higher could indicate damage (use a sewing needle or something to push down on it to see if it’s loose…)
This is the best i could doOk then, get a good look inside of the port with a high-res camera. Since you have another Switch, compare the two. Any pins that look even slightly higher could indicate damage (use a sewing needle or something to push down on it to see if it’s loose…)
Well, you should angle the camera when you take the pic, and try to get both sides of the middle piece (take 2 pics), but already it seems that one of those pics is not like the other…This is the best i could do
EDIT: the right one is the modded switch