OLED HWFLY fail to reboot to CFW

Melter

Well-Known Member
OP
Member
Joined
Mar 31, 2011
Messages
189
Trophies
1
XP
535
Country
United States
Hoping someone can shed some light on a minor problem I'm facing with my HWFLY on my switch OLED - when rebooting within atmosphere around 90% of the time the HWFLY lights up Cyan on reboot and boots to OFW. I tried setting up reboot to payload in atmosphere config as well as explicitly disabling it with no difference.

When powering off and then powering on the switch form cold boot the chip boots hekate 100% perfectly each time, this issue only seems to occur on reboot.

I am also on the latest HWFLY version 0.6.2.

Has anyone faced a similar issue?
 

Draxzelex

Well-Known Member
Member
Joined
Aug 6, 2017
Messages
18,986
Trophies
2
Age
29
Location
New York City
XP
13,325
Country
United States
Hoping someone can shed some light on a minor problem I'm facing with my HWFLY on my switch OLED - when rebooting within atmosphere around 90% of the time the HWFLY lights up Cyan on reboot and boots to OFW. I tried setting up reboot to payload in atmosphere config as well as explicitly disabling it with no difference.

When powering off and then powering on the switch form cold boot the chip boots hekate 100% perfectly each time, this issue only seems to occur on reboot.

I am also on the latest HWFLY version 0.6.2.

Has anyone faced a similar issue?
Reboot to payload doesn't work on OLED units.
 

estm13

Member
Newcomer
Joined
Apr 5, 2022
Messages
11
Trophies
0
Age
46
Location
lot 130
XP
110
Country
Malaysia
Hoping someone can shed some light on a minor problem I'm facing with my HWFLY on my switch OLED - when rebooting within atmosphere around 90% of the time the HWFLY lights up Cyan on reboot and boots to OFW. I tried setting up reboot to payload in atmosphere config as well as explicitly disabling it with no difference.

When powering off and then powering on the switch form cold boot the chip boots hekate 100% perfectly each time, this issue only seems to occur on reboot.

I am also on the latest HWFLY version 0.6.2.

Has anyone faced a similar issue?
same as mine, after resolder sp1 and sp2 everything run perfectly
 
Joined
Sep 9, 2019
Messages
904
Trophies
1
Location
Switch scene
Website
github.com
XP
2,663
Country
Korea, North
as far as i know Reboot to payload doesnt work on Lite and Mariko (OLED is Mariko)

Reboot to payload doesn't work on OLED units.
Even without reboot to payload Mariko / Lite / Oled models will reboot to the payload on the SD Card as if it is doing a cold boot. There's probably something wrong with the firmware on OP's chip because my Oled and Mariko can reboot in to Hekate automatically on fatal.

Edit: Or an issue with the soldering, as estm13 pointed out.
 

burhansalih

Well-Known Member
Member
Joined
Jan 11, 2009
Messages
1,596
Trophies
1
Location
London, England
XP
2,454
Country
United Kingdom
68747470733a2f2f692e696d6775722e636f6d2f6e48596e4266752e676966
 

Melter

Well-Known Member
OP
Member
Joined
Mar 31, 2011
Messages
189
Trophies
1
XP
535
Country
United States
I’ve seen this chart. When the reboot fails I get the solid cyan color (FPGA error) so I’m not sure what it means. I have also updated to the latest version of the firmware and still getting the same issue.

I don’t think it’s a problem with the soldering since the chip works 100% of the time on cold boot, and fails (almost) 100% of the time on reboot.

it’s not really a big deal since I can just power off and back on easily enough if I need to reboot but would be nice if there was a way to get it to work in all cases.
 

estm13

Member
Newcomer
Joined
Apr 5, 2022
Messages
11
Trophies
0
Age
46
Location
lot 130
XP
110
Country
Malaysia
I’ve seen this chart. When the reboot fails I get the solid cyan color (FPGA error) so I’m not sure what it means. I have also updated to the latest version of the firmware and still getting the same issue.

I don’t think it’s a problem with the soldering since the chip works 100% of the time on cold boot, and fails (almost) 100% of the time on reboot.

it’s not really a big deal since I can just power off and back on easily enough if I need to reboot but would be nice if there was a way to get it to work in all cases.
hi, let give a try to update your hekate and nyx to latest version maybe will solve your problem
 

Attachments

  • 1.jpg
    1.jpg
    79.9 KB · Views: 107

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Z @ Zurdonx: there is a spammer