Switch - Permanently power cooling fan

If you have a hardware issue with temperature indicator and the fan will not spin.
You can permanently power the cooling fan. The NSW dosn't check faulty fan speed.

You can use V3.3 from Nand point, it will give enough power for trinket & fan, too.

51K0ml.jpg


51KQK2.jpg


51K5M2.jpg


51K7Jf.jpg


Warning Note: Dosn't connect the flat cable from the fan back to the mainboard. Cut it away!
Remember also: Permanently power fan will drain your accu but better as to dispose NSW.
 

dimitriblaiddyd78

Active Member
Newcomer
Joined
Feb 27, 2020
Messages
27
Trophies
0
Age
28
XP
98
Country
India
Hey, can anyone help me. I am using Reverse NX in handheld and using docked speeds. But the fan is following handheld profile and it goes all out at 100%. How do I set docked fan profile in handheld so that it doesn't go all out trying to maintain handheld temperature limits?
 

iacErPUL

Active Member
Newcomer
Joined
May 30, 2020
Messages
33
Trophies
0
XP
154
Country
Belgium
Hello, I've been trying to increase the fan speeds with no luck. I have made a "system_settings.ini" file and put the lines in the file and placed it in the atmosphere directory. I have also rebooted to and from hekate or do I have to do a full reboot for this to take effect? Also, I'm running Atmosphere 0.12.0 on firmware 10.0.3
 

Obikuni

New Member
Newbie
Joined
Jul 24, 2018
Messages
1
Trophies
0
Age
38
XP
116
Country
Brazil
Does have a way to create a sys module to works with SXOS ?
By the way, Really thanks... That is something that I've waiting for a time.
My PS3/X360 got some problems about the temperature, almost lost these two if was not the Cooler Fan Mod Software...
Again, Thanks a Lot.
This is cool but there's no need to take risk.

add this to atmosphere/system-settings.ini to enable max fan speed.

str!"[[-1000000, 40000, 255, 255]
-1000000, 40000 these are temperature 40000 = 40C
255 is the speed, 0-255

Code:
; Unlock fan speed (dock speeds)
[tc]
tskin_rate_table_handheld = str!"[[-1000000, 40000, 255, 255], [36000, 43000, 51, 51], [43000, 48000, 51, 102], [48000, 53000, 102, 153], [53000, 58000, 153, 255], [48000, 58000, 153, 255]]"
 

wartutor

Well-Known Member
Member
Joined
Dec 25, 2012
Messages
757
Trophies
1
Age
45
XP
2,366
Country
United States
Does this work on the latest firmware / atmosphere [FW 9.1 / atmos 0.10.2]? I wan't to max out the fan speed at 50 or 60 percent speed, but changing the values doesn't seem to work.

Hello, I've been trying to increase the fan speeds with no luck. I have made a "system_settings.ini" file and put the lines in the file and placed it in the atmosphere directory. I have also rebooted to and from hekate or do I have to do a full reboot for this to take effect? Also, I'm running Atmosphere 0.12.0 on firmware 10.0.3

For those that asked it took me a bit to figure this out but it does work with latest firmware just put the system_settings.ini file in atmosphere/config folder
 

Ginaryu

New Member
Newbie
Joined
Oct 4, 2020
Messages
1
Trophies
0
Age
22
XP
34
Country
Mexico
Hello, I've been trying to increase the fan speeds with no luck. I have made a "system_settings.ini" file and put the lines in the file and placed it in the atmosphere directory. I have also rebooted to and from hekate or do I have to do a full reboot for this to take effect? Also, I'm running Atmosphere 0.12.0 on firmware 10.0.3

Did you manage to increase the speed of the fans?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: Beat Celebrity Death Match on the PS1 omg tried it earlier today .... Absolutely trash