Hacking 3DS NOOB PARADISE - Ask questions here

[EmulateLife]

I hate hacking the 3ds I have every problem that no one else has. I keep trying to inject fbi into h&s doesn't work, now on emu 11.0 there's an empty folder there.

 

[Protatoxxxeater]

hold "L" on boot

Well, after getting it all said and done, getting the thing to trigger by pressing down upon boot up, I press down on bootup and it says "An Error has occured holw down the power button to turn off the power and then turn it on and try again."

I can boot into the 3DS perfectly fine normally, still cannot access the Homebrew menu via Menuhax.

"

 

[Yokimari]

hold "L" on boot

"

Hold L on boot... After I install Menuhax, should I do anything else? Do I need to configure it, or is L on boot default?

Also thank goodness I backed up my SDCard before I started this.

 

[Protatoxxxeater]

I hate hacking the 3ds I have every problem that no one else has. I keep trying to inject fbi into h&s doesn't work, now on emu 11.0 there's an empty folder there.

HI, ill help you. follow section 4 https://gbatemp.net/threads/tutorial-installing-rxtools-custom-firmware-3ds-and-2ds.390867/ it worked when i had issues, title manager has a higher success rate then fbi in my opinion

--------------------- MERGED ---------------------------

Hold L on boot... After I install Menuhax, should I do anything else? Do I need to configure it, or is L on boot default?

it should be default, if u want to make it run without button, open menuhax manager, configure and then type 1 and tap the bottom screen

 

[Yokimari]

HI, ill help you. follow section 4 https://gbatemp.net/threads/tutorial-installing-rxtools-custom-firmware-3ds-and-2ds.390867/ it worked when i had issues, title manager has a higher success rate then fbi in my opinion

--------------------- MERGED ---------------------------


it should be default, if u want to make it run without button, open menuhax manager, configure and then type 1 and tap the bottom screen

Not what the instructions on the guide says, but I'll try it your way. Just a matter of restoring my SDCard and giving it another shot...

 

[Protatoxxxeater]

Not what the instructions on the guide says, but I'll try it your way. Just a matter of restoring my SDCard and giving it another shot...

there is a guide on this? ive been using menuhax for like 8 months until i got a9lh

 

[Yokimari]

there is a guide on this? ive been using menuhax for like 8 months until i got a9lh

https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)

Yup

 

[Sonic Angel Knight]

Not what the instructions on the guide says, but I'll try it your way. Just a matter of restoring my SDCard and giving it another shot...

Make sure the SDCARD is read properly in the system, or that could be the problem is the system isn't reading the sd card.

 

[Protatoxxxeater]

https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)

Yup

that guide is for arm9loaderhax, i thought it was an entire guide designated to the simple program of menuhax

 

[Yokimari]

that guide is for arm9loaderhax, i thought it was an entire guide designated to the simple program of menuhax

So I dont need to change my time or any of that other crud? I just change theme, load exploit?

 

[Protatoxxxeater]

So I dont need to change my time or any of that other crud? I just change theme, load exploit?

oh yeah, u dont have to do that, i havent used menuhax on 11.0+ so, follow what the guide says but you should hold L as it is the defaut since the beginning of time

 

[Sonic Angel Knight]

that guide is for arm9loaderhax, i thought it was an entire guide designated to the simple program of menuhax

The first part of the guide is dedicated to setting up menuhax.
everything after part three is for arm9loader hax.

So I dont need to change my time or any of that other crud? I just change theme, load exploit?

No, is not necessary to change your time. Just put the boot.3dsx on the root of sd card with the menuhax 3.0 homebrew and scan the qrcode and use menuhax to install the menuhax. If you change your theme after installing menuhax you WILL LOSE MENUHAX AND NEED TO INSTALL IT AGAIN.

 

[Yokimari]

oh yeah, u have to do that, i havent used menuhax on 11.0+ so, follow what the guide says but you should hold L as it is the defaut since the beginning of time

Also it prompts me to do something else, but I cannot remember exactly what it is.. "tired" something about

The first part of the guide is dedicated to setting up menuhax.
everything after part three is for arm9loader hax.


No, is not necessary to change your time. Just put the boot.3dsx on the root of sd card with the menuhax 3.0 homebrew and scan the qrcode and use menuhax to install the menuhax. If you change your theme after installing menuhax you WILL LOSE MENUHAX AND NEED TO INSTALL IT AGAIN.

Ok I'm in Homebrew Launcher, what do I need to do next? Do I install CHMM2 first, or do I install menuhax first?

Got a message about robpin or something, should I press b here?

 

[Sonic Angel Knight]

Also it prompts me to do something else, but I cannot remember exactly what it is.. "tired" something about


Ok I'm in Homebrew Launcher, what do I need to do next? Do I install CHMM2 first, or do I install menuhax first?

Are you trying to install custom themes or Menuhax?

 

[Yokimari]

Are you trying to install custom themes or Menuhax?

I'm really trying to install Menuhax. lol

 

[Protatoxxxeater]

Also it prompts me to do something else, but I cannot remember exactly what it is.. "tired" something about


Ok I'm in Homebrew Launcher, what do I need to do next? Do I install CHMM2 first, or do I install menuhax first?

Got a message about robpin or something, should I press b here?

Press B and last i checked u have to install custom themes through menuhax but i didnt see the option in the latest release

 

[Sonic Angel Knight]

I'm really trying to install Menuhax. lol

Then select the menuhax, Select install option, and it should install. Then go to config menuhax, and follow the process to enable DPAD Down to be the trigger. Then you are done.

If you wish to use custom themes, do it after you install menuhax, and Don't change it at the home menu scrreen or you need to install it again.

 

[Yokimari]

Then select the menuhax, Select install option, and it should install. Then go to config menuhax, and follow the process to enable DPAD Down to be the trigger. Then you are done.

If you wish to use custom themes, do it after you install menuhax, and Don't change it at the home menu scrreen or you need to install it again.

At this point all I want is to get a way to run Homebrew Channel without having to go to this website, which I believe is what MenuHax should do. So far it just errors on me and tells me to reboot the system by holding power down. Will try it again...

 

[Sonic Angel Knight]

At this point all I want is to get a way to run Homebrew Channel without having to go to this website, which I believe is what MenuHax should do. So far it just errors on me and tells me to reboot the system by holding power down. Will try it again...

Are you using menuhax 3.0?

 

[Protatoxxxeater]

Then select the menuhax, Select install option, and it should install. Then go to config menuhax, and follow the process to enable DPAD Down to be the trigger. Then you are done.

If you wish to use custom themes, do it after you install menuhax, and Don't change it at the home menu scrreen or you need to install it again.

does spider31 exploit use a differnt principle than spider28, and so spider31 inst as vuln as 28?