Homebrew Oot3dHax on 11.0?

[Sonic Angel Knight]

I'm having difficulties getting Oot3dHax to work as well. I'm on 11.0.0.33U with a New 3DS XL, and I had a similar issue where I couldn't boot into the freakyhax fix as well. When I run Oot3dhax, the game crashes and I get the "An error has occurred forcing the software to close. The system will now restart." error. I used Powersaves to transfer the newest 6-26-16 release to my cartridge and it looks fine. I've also tried various combos of the starter files and boot.3dsx files to no avail (http://i.imgur.com/rbi3q1k.jpg).

I went on #3dsdev to get some help but I'm not sure if there is something that screwed up when I initially ran freakyhax a week ago. I was able to get it to the boot sector screen with the ropbin text but then my 3DS froze on that screen and never finished booting into the Homebrew menu (I think the bottom screen may have been very dark greenish?). I rebooted my 3DS and afterward I could never get freakyhax to launch that boot screen (someone said something about "getting the boot sector going") and tried multiple different file combos, save resets, etc.

I thought Oot3dhax would work in my case, but I've gotten the same crashing error. I used my Powersaves to copy over the C2 image of US N3DS_U_25600_usa_9221 and it looks good from what I can tell and runs all the way up until I pull out the ocarina and freezes. I'm wondering if due to that initial time that I tried to boot/install Homebrew channel and my 3DS froze, that I'm running into all these problems. Any help would be great.

If you are using freaky forms deluxe to do freakyhax use this page
http://plutooo.github.io/freakyhax/

If you are using oothax with powersaves, use this page.
https://github.com/yellows8/oot3dhax

 

[Link'sSpiritualAwakening]

Haven't failed a boot of oothax yet since the update for my New 11.0.33J. Just dragged the starter kit on my friends hacked one, installed for my cartridge using oothax installer, and boom.

 

[deanzel]

If you are using freaky forms deluxe to do freakyhax use this page
http://plutooo.github.io/freakyhax/

If you are using oothax with powersaves, use this page.
https://github.com/yellows8/oot3dhax

Yeah, I've used those of those pages quite a bit. I'm just referencing freakyhax because I'm getting the same error with that as I am with Oot3dhax which leads me to believe something may have screwed up when I first tried to boot homebrew and my system froze with the black screen above/dark green below. Now, neither of these two hax are working properly...

 

[Sonic Angel Knight]

Yeah, I've used those of those pages quite a bit. I'm just referencing freakyhax because I'm getting the same error with that as I am with Oot3dhax which leads me to believe something may have screwed up when I first tried to boot homebrew and my system froze with the black screen above/dark green below. Now, neither of these two hax are working properly...

Try copying the starter.zip files to your sd card again, then make sure your sd card is inserted properly, if you can see your selected theme then it should be inserted.

 

[03bgood]

I can't get Ninjhax to work on 11.0-33U, help!

 

[Sonic Angel Knight]

I can't get Ninjhax to work on 11.0-33U, help!

But this thread is for OOT3DHAX Nont "Ninjahax"

 

[03bgood]

But this thread is for OOT3DHAX Nont "Ninjahax"

I know that but can anyone get Ninjhax to work on 11.0? When I select NEW 11.0.0-33U and then scan the QR code, it freezes for like 5 seconds and then it returns to the home menu and says "An error has occurred" and then resets my system.

 

[Sonic Angel Knight]

I know that but can anyone get Ninjhax to work on 11.0? When I select NEW 9.0.0-33U and then scan the QR code, it freezes for like 5 seconds and then I get the "Error has occurred" screen.

Again this thread is for OOT3DHAX
And second if your system is 11.0.0 why are you using instructions for 9.0.0?

 

[03bgood]

Again this thread is for OOT3DHAX
And second if your system is 11.0.0 why are you using instructions for 9.0.0?

I meant to say "11.0.0-33", it was a typo I corrected.

 

[CeeDee]

"I am a female"
10 pages later...

profile says male
first reply is "shut up you stupid noob its not possible use da search bar"

 

[configchan]

Are you getting people's names confused? TC hasn't posted in over a week.

 

[deanzel]

I'm currently trying to run HB on an O3DS with 11.0-33E, and it just kept crashing after pressing the Ocarina icon, but spamming A worked, thanks a lot man!

Legendary. This fixed my issue as well on my New 11.0.0.33U. Who knew that spamming A was the solution all along

 

[Khemraj95]

can i get oot3dshax on the digital version?

 

[GalladeGuy]

can i get oot3dshax on the digital version?

Yes. Same thing, just select the digital version instead of the card.

 

[Khemraj95]

Yes. Same thing, just select the digital version instead of the card.

on version 11.00

 

[GalladeGuy]

on version 11.00

Yes. You will still have to inject the payload manually using FBI until the installer get's updated though.

 

[Khemraj95]

Yes. You will still have to inject the payload manually using FBI until the installer get's updated though.

so i dont have cfw, i only have homebrew but i want i second entry point. wont i need cfw for fbi

 

[Posghetti]

so i dont have cfw, i only have homebrew but i want i second entry point. wont i need cfw for fbi

no, I think there's a .3dsx floating some where

 

[Khemraj95]

no, I think there's a .3dsx floating some where

omg omg omg omg youre the best. can you explain how i use it to get homebrew with oot3dshax

 

[Posghetti]

omg omg omg omg youre the best. can you explain how i use it to get homebrew with oot3dshax

Wait... what are you using to launch hb already? (since you said you have hb already but want another way to get into it)