Homebrew ninjhax is LIVE

[Helper]

I compiled 3ds_hb_menu from source and when I try to convert .elf to .cia I get:

[ELF ERROR] Too large section size.
Segment size = 0x1a4d0
Section Size = 0xfff05598
[ELF ERROR] Failed to process ELF file (-16)
[NCCH ERROR] NCCH Build Process Failed
[RESULT] Failed to build outfile

I remember this happening to non-stripped blargSnes and I have no idea what to do with it.

Hey, at least you know your "section" is too large <3

Spoiler

Too lewd?

 

[driverdis]

What I wonder is if homebrew can be written that uses both ARM11 and ARM9 by running on Gateway 2.6b for ARM9 access while running off of Ninjhax for ARM11. My guess is no.

 

[kheldar]

Noob question: Doesn't gateway already provide an enviroment for homebrew so why do we need this for ? If the answer is no can I run this and gateway together ?

 

[driverdis]

Noob question: Doesn't gateway already provide an enviroment for homebrew so why do we need this for ? If the answer is no can I run this and gateway together ?

Gateway runs stuff on ARM9 only from what I understand.
Ninjhax runs code on ARM11 only.

 

[kheldar]

Gateway runs stuff on ARM9 only from what I understand.
Ninjhax runs code on ARM11 only.

And that means?

 

[driverdis]

And that means?

ARM9 can do stuff ARM11 can not and vice versa.
retail 3DS games use ARM11 rather than 9
Both have their up and downsides.

 

[weatMod]

Well that sucks, guess there ain't much hope for those who plan on getting a 3DS in the near future. Well those future owners are f***ed, esp that the exploit must be done with WiFi and impending doom from system updates. Yeah, pretty sure they'll never be a way around that.

why? do we need to be on the latest FW for this exploit to go online and do it's thing? i was under the impression that we only need to be on latest FW to go on to the eshop ,my emunand is on the last version before the current one and i can still play games online , browser and online play work if you are not on latest fw so why wouldnt this exploit be able to connect to online? it doesnt use eshop

 

[sj33]

A new system update isn't going to affect the ability to utilise wifi to apply the exploit.

 

[rlvbrussel]

I have trouble with automatic running of the homebrew.
When I klik Q-code then the game goes to scan Q-code and not homebrew.

Mine 3ds is european 9.2.0.20E gateway and mine cubix ninja is european.

sorry for mine bad english.

first time install i went to homebrew when i sut down the 3ds and go back to CN then i must scan the q-code again.

 

[octopus]

I compiled 3ds_hb_menu from source and when I try to convert .elf to .cia I get:

[ELF ERROR] Too large section size.
Segment size = 0x1a4d0
Section Size = 0xfff05598
[ELF ERROR] Failed to process ELF file (-16)
[NCCH ERROR] NCCH Build Process Failed
[RESULT] Failed to build outfile

I remember this happening to non-stripped blargSnes and I have no idea what to do with it.

Ok, the solution was

arm-none-eabi-strip 3ds_hb_menu.elf

After that you would be able to build .cia.

I'm really close. So, the HB Launcher launches after I built it as .cia, but when I use home button and close it, console hangs. It does not launch any homebrew. You can only scroll the list.
I guess I need a proper rsf, no idea how to make one.
I also need a proper icon and banner for the launcher, I think I have already encountered something like that: blue wave icon (came with some homebrew), not sure about the banner. Does anyone know where to get them?

UPD: I missed the replies on page 7. So, I got the same result.

 

[fadeyt]

sweet deal. props on the release.

 

[sj33]

For anybody having trouble, I had trouble taking pictures of the QR code on my netbook - it just seemed to crash to show a black screen. Switched to a proper full resolution laptop screen and it was fine.

Something to try for people struggling to get the QR code working.

 

[Kandern97]

Think you might be using the wrong region game should be the us version for your system
I converted the 3ds file to cia installed it then used the 9.2.0.20e qr code to launch the exploit i have an eu 3ds

Also make sure the wifi switch is on

Ok, finally managed to get my hands on the US version, here goes nothing.

 

[SpaceJump]

Still can't get it to work on emuNand 9.2, which should work according to some here on the Temp. It always freezes at running eploit...70%. Tried EU and U CIA of the game and the .3ds from the GW multirom menu, always the same. I'm supposed to enter to emuNand version in the QR generator, right?

 

[Kandern97]

Still can't get it to work on emuNand 9.2, which should work according to some here on the Temp. It always freezes at running eploit...70%. Tried EU and U CIA of the game and the .3ds from the GW multirom menu, always the same. I'm supposed to enter to emuNand version in the QR generator, right?

Same problem, was thinking the same question.

 

[Ryft]

I have trouble with automatic running of the homebrew.
When I klik Q-code then the game goes to scan Q-code and not homebrew.

Mine 3ds is european 9.2.0.20E gateway and mine cubix ninja is european.

sorry for mine bad english.

first time install i went to homebrew when i sut down the 3ds and go back to CN then i must scan the q-code again.

Are you using the. 3ds? I think it's because of the way Gateway backs up saves. When you load the exploit and then exit, it reboots to your sysnand which prevents Gateway from storing the save. I had the same problem but after installing as a cia, it works fine.

 

[naxil]

Hey people.. and ds roms? ? Is possible launch ds backups with ninjaxx

 

[naxil]

Homebrew for unlock sky 3ds?

 

[kedest]

This is awesome. Years ago, in the days of Wii Homebrew, I was very active on this forum. It's great to be back here now to follow all these exciting new developments.

 

[mid-kid]

Here goes hoping for a 3DS menu Qr code hack which doesn't require me to fight against high bids on shopping sites.