Hacking USB Loader GX freezes at initializing usb device !!!! HELP PLEASE

Status
Not open for further replies.
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
it completely freezez at "initializing usb device...." for hours.. it was working recently before this happens,, please help

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: Unknown
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Console ID: 125491847
Boot2 v4
Found 128 titles.
Found 55 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5661): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS222[38] (rev 4, Info: hermes-v4.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
IOS255[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
BC v6
MIOS v65535

Report generated on 2013/10/05.
 
AbdallahTerro

AbdallahTerro

da KiNG
Member
Level 12
Joined
Jan 14, 2012
Messages
6,052
Trophies
0
Location
Ideas factory :)
Website
ccabz.wordpress.com
XP
3,123
Country
  • Like
Reactions: Samrmessi
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
AbdallahTerro said:
your IOS249 is pretty outdated
it seems you installed d2x8 pack then installed 249 manually
Anyway if you don't want to touch your IOSs get USBL-GX dol 222 or 250 (rev 1214 is the latest found in my Sig has all dols)

However I recommend updating IOS 249 to d2x 10 or 10alt base 56 for better compatibility and stability
http://code.google.com/p/d2x-cios/downloads/detail?name=d2x-v10-beta52.zip&can=2&q=
http://code.google.com/p/d2x-cios/downloads/detail?name=d2x-v10-beta53-alt.zip&can=2&q=
Click to expand...


Same problem

http://syscheck.softwii.de/Vhuzts0Z

:(
 
L

LinkFan16

I link them all
Member
Level 8
Joined
Mar 15, 2009
Messages
424
Trophies
1
XP
1,491
Country
Germany
He told you to install d2x v10, but instead you installed the even more outdated v6. Go and install IOS249 d2x v10 as you were told and then report your results. If you don't know what to do with the stuff Abz linked you to, I'm sure you can use Modmii to download IOS249 d2x v10 as a .wad file and then install it with a wad manager.
 
  • Like
Reactions: Samrmessi
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
LinkFan16 said:
He told you to install d2x v10, but instead you installed the even more outdated v6. Go and install IOS249 d2x v10 as you were told and then report your results. If you don't know what to do with the stuff Abz linked you to, I'm sure you can use Modmii to download IOS249 d2x v10 as a .wad file and then install it with a wad manager.
Click to expand...

what about v8 ?? it it working ? :\
 
L

LinkFan16

I link them all
Member
Level 8
Joined
Mar 15, 2009
Messages
424
Trophies
1
XP
1,491
Country
Germany
As I had v8 installed, it worked fine for me. However, different wiis and different HDDs give different results (I helped a friend hacking his wii with the exact same setup as mine, but for him it did not work). Of course you can try to install v8 and see if it works for you, but that's up to you. If I were you I would just install v10 as you were told and then try another way if that does not work.
 
  • Like
Reactions: Samrmessi
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
LinkFan16 said:
As I had v8 installed, it worked fine for me. However, different wiis and different HDDs give different results (I helped a friend hacking his wii with the exact same setup as mine, but for him it did not work). Of course you can try to install v8 and see if it works for you, but that's up to you. If I were you I would just install v10 as you were told and then try another way if that does not work.
Click to expand...
see i updated to v8

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: Unknown
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Console ID: 125491847
Boot2 v4
Found 129 titles.
Found 56 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5661): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
IOS255[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
BC v6
MIOS v65535

Report generated on 2013/13/05.
-
-
AND STILL HAVING THE SAME PROBLEM !
what should i do ?
 
L

LinkFan16

I link them all
Member
Level 8
Joined
Mar 15, 2009
Messages
424
Trophies
1
XP
1,491
Country
Germany
Update to the newest version, or to be exact version 10 as you were told 3 times already. v8 is still outdated. And maybe post some more info on your setup like what version of usb loader gx you are using so we can see if there are other things that might cause your problem.
 
  • Like
Reactions: Samrmessi
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
LinkFan16 said:
Update to the newest version, or to be exact version 10 as you were told 3 times already. v8 is still outdated. And maybe post some more info on your setup like what version of usb loader gx you are using so we can see if there are other things that might cause your problem.
Click to expand...
can u please give me link for v10 ? i can't find it :\
 
L

LinkFan16

I link them all
Member
Level 8
Joined
Mar 15, 2009
Messages
424
Trophies
1
XP
1,491
Country
Germany
  • Like
Reactions: Samrmessi
Cyan

Cyan

GBATemp's lurking knight
Former Staff
Level 25
Joined
Oct 27, 2002
Messages
23,749
Trophies
4
Age
45
Location
Engine room, learning
XP
15,648
Country
France
You need to follow this guide to install v10 (beta 52):
http://code.google.com/p/d2x-cios/wiki/How_To_Install said:
d2x-cios-installer:

Download the latest d2x-cios-installer from its google code page:

d2x cIOS installer

Extract it into the apps folder of your sd card or usb device
Extract d2x-v7-final.zip or whatever the current version it is on your sd card or usb device into the folder /apps/d2x-cios-installer.

NOTE: This will overwrite the file /apps/d2x-cios-installer/ciosmaps.xml possibly present in that folder.You might want to rename it before extracting the d2x package.

Launch the Homebrew Channel, start the installer and follow the instructions on the screen
Click to expand...

So, let's resume :
- Download the installer
- Download d2x v10
- extract the installer on your SD
- extract the latest version of D2x (v10 beta 52) in the same folder to replace v7 with v10
- launch the homebrew "cIOS d2x installer" on your wii and press Right D-pad when asked which version you want to install to find "v10".

You need to install this :
Slot : 249
d2x version : v10
Base IOS : 56
IOS Version : 21010

Slot : 250
d2x version : v10
Base IOS : 57
IOS version : 21010

If it still doesn't work, you can try again with V10-alt (beta 53).

Of course, after updating, the problem could still be there. but at lease we will know that you tested the latest version and we can check other things.

Edit:
You can also try another USBLoader.
Wiiflow or Config Loader seems to have better compatibility when initializing HDDs.
 
  • Like
Reactions: Samrmessi
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
Cyan said:
You need to follow this guide to install v10 (beta 52):


So, let's resume :
- Download the installer
- Download d2x v10
- extract the installer on your SD
- extract the latest version of D2x (v10 beta 52) in the same folder to replace v7 with v10
- launch the homebrew "cIOS d2x installer" on your wii and press Right D-pad when asked which version you want to install to find "v10".

You need to install this :
Slot : 249
d2x version : v10
Base IOS : 56
IOS Version : 21010

Slot : 250
d2x version : v10
Base IOS : 57
IOS version : 21010

If it still doesn't work, you can try again with V10-alt (beta 53).

Of course, after updating, the problem could still be there. but at lease we will know that you tested the latest version and we can check other things.

Edit:
You can also try another USBLoader.
Wiiflow or Config Loader seems to have better compatibility when initializing HDDs.
Click to expand...


sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: Unknown
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Console ID: 125491847
Boot2 v4
Found 126 titles.
Found 53 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 523): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 3867): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5661): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS222[38] (rev 65535, Info: hermes-v5.1): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[38] (rev 17): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS250 (rev 65535): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS255[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
BC v6
MIOS v65535Report generated on 2013/19/06.

dude im still getting same error :( what to do now ??
 
Cyan

Cyan

GBATemp's lurking knight
Former Staff
Level 25
Joined
Oct 27, 2002
Messages
23,749
Trophies
4
Age
45
Location
Engine room, learning
XP
15,648
Country
France
You installed Rev17 in slot 249 and 250.
Revision 17 is only working with WBFS partition. no FAT32, no NTFS.

You still haven't updated your cIOS to d2x v10.

You need a IOS with [56] (usually installed in slot 249)
You need a IOS with [57] (usually installed in slot 250)
You have everything else, except these exact two required IOS !
All other custom IOS are not needed.

Which error are you talking about?
Did you follow the guide I wrote for you?
Which step did you do, and which step do you have the error?
 
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
Cyan said:
You installed Rev17 in slot 249 and 250.
Revision 17 is only working with WBFS partition. no FAT32, no NTFS.

You still haven't updated your cIOS to d2x v10.

You need a IOS with [56] (usually installed in slot 249)
You need a IOS with [57] (usually installed in slot 250)
You have everything else, except these exact two required IOS !
All other custom IOS are not needed.

Which error are you talking about?
Did you follow the guide I wrote for you?
Which step did you do, and which step do you have the error?
Click to expand...
please im too newbie here what steps should i do now exactly ??

And im talking about this freeze

5xmw5s.jpg
 
Cyan

Cyan

GBATemp's lurking knight
Former Staff
Level 25
Joined
Oct 27, 2002
Messages
23,749
Trophies
4
Age
45
Location
Engine room, learning
XP
15,648
Country
France
I'm talking about the steps you quoted, just above.

You asked "how do I install cIOS d2x version 10?"
I explained to you how to do the installation
You quoted the explanation (so I deducted that you wanted to comment something about the guide I wrote), but your syscheck is showing that you didn't even install d2x cIOS

instead, you installed an OLD and INCOMPATIBLE cIOS.
If you don't know what you are doing, please don't try random things.

I told you what to do, if you don't understand a step in the guide, ask for a more detailed step by step.

Here, I will repost the guide, tell me which step of the guide you don't understand or have problem to follow and would like a detailed step :

Step 1 - Download the installer
Step 2 - Download d2x v10 beta 52
Step 3 - extract the installer on your SD
Step 4 - extract the latest version of d2x (v10 beta 52) in the same folder to replace v7 with v10
Step 5 - launch the homebrew "cIOS d2x installer" on your wii and press Right D-pad when asked which version you want to install to find "v10".

You need to install this : (use Right/Left D-PAD to switch available options, Up/Down to navigate in the screen, in fact READ what's written on your screen to understand what you need to press)
Slot : 249
d2x version : v10
Base IOS : 56
IOS Version : 21010

Slot : 250
d2x version : v10
Base IOS : 57
IOS version : 21010

Step 6 - Exit d2x Installer
Step 7 - Test launching USBLoader with HDD connected on the Bottom USB Port (when your wii is horizontal)


If it still doesn't work, you can try again starting from Step2 but with V10-alt beta 53 instead of V10 Beta52.

Of course, after updating, the problem could still be there. but at least we will know that you tested the latest version and we can then suggest other things to help you.

You can also try another USBLoader.
Wiiflow or Config Loader seems to have better compatibility when initializing HDDs.
 
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
Cyan said:
I'm talking about the steps you quoted, just above.

You asked "how do I install cIOS d2x version 10?"
I explained to you how to do the installation
You quoted the explanation (so I deducted that you wanted to comment something about the guide I wrote), but your syscheck is showing that you didn't even install d2x cIOS

instead, you installed an OLD and INCOMPATIBLE cIOS.
If you don't know what you are doing, please don't try random things.

I told you what to do, if you don't understand a step in the guide, ask for a more detailed step by step.

Here, I will repost the guide, tell me which step of the guide you don't understand or have problem to follow and would like a detailed step :

Step 1 - Download the installer
Step 2 - Download d2x v10 beta 52
Step 3 - extract the installer on your SD
Step 4 - extract the latest version of d2x (v10 beta 52) in the same folder to replace v7 with v10
Step 5 - launch the homebrew "cIOS d2x installer" on your wii and press Right D-pad when asked which version you want to install to find "v10".

You need to install this : (use Right/Left D-PAD to switch available options, Up/Down to navigate in the screen, in fact READ what's written on your screen to understand what you need to press)
Slot : 249
d2x version : v10
Base IOS : 56
IOS Version : 21010

Slot : 250
d2x version : v10
Base IOS : 57
IOS version : 21010

Step 6 - Exit d2x Installer
Step 7 - Test launching USBLoader with HDD connected on the Bottom USB Port (when your wii is horizontal)


If it still doesn't work, you can try again starting from Step2 but with V10-alt beta 53 instead of V10 Beta52.

Of course, after updating, the problem could still be there. but at least we will know that you tested the latest version and we can then suggest other things to help you.

You can also try another USBLoader.
Wiiflow or Config Loader seems to have better compatibility when initializing HDDs.
Click to expand...

Dude im getting timeour error while installing as shown in attachment oic

d2x v10 beta 52
Slot : 250
d2x version : v10
Base IOS : 57
IOS version : 21010
---------------------------------------

so i installed V10-alt (beta 53)

and still same problem :(

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: Unknown
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Console ID: 125491847
Boot2 v4
Found 126 titles.
Found 53 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 523): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3351): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 3867): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5661): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS222[38] (rev 65535, Info: hermes-v5.1): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21010, Info: d2x-v10beta53-alt): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21010, Info: d2x-v10beta53-alt): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS255[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
BC v6
MIOS v65535

Report generated on 2013/19/06.
 

Attachments

  • CAM00271.jpg
    CAM00271.jpg
    333.5 KB · Views: 768
Cyan

Cyan

GBATemp's lurking knight
Former Staff
Level 25
Joined
Oct 27, 2002
Messages
23,749
Trophies
4
Age
45
Location
Engine room, learning
XP
15,648
Country
France
is your drive working with other homebrew ?
Like WiiMC and homebrew channel ?

If it's working, then try this:
Set USBLoaderGX > settings > loader settings > main IOS to slot251
restart the loader.

Maybe your Wii only accept USB access based on IOS58.
if slot251 works, please, try this homebrew :
http://code.google.com/p/mplayer-ce/downloads/detail?name=USB Test.rar

It will tell you if your USB is working with ehci (USB) module or not, and will create a report on your SD card.
If you have "USB Status : 0x3002" in the report file, then your Wii is one of the very rare consoles (I know only three cases), and your Wii will not work with cIOS not based on IOS 58.
As a result, not all games will work from USBloaders (as IOS 58 is not the most compatible with games).
 
Samrmessi

Samrmessi

Member
OP
Newcomer
Level 1
Joined
May 10, 2013
Messages
22
Trophies
0
Age
28
Location
Irbid
XP
42
Country
Cyan said:
is your drive working with other homebrew ?
Like WiiMC and homebrew channel ?

If it's working, then try this:
Set USBLoaderGX > settings > loader settings > main IOS to slot251
restart the loader.

Maybe your Wii only accept USB access based on IOS58.
if slot251 works, please, try this homebrew :
http://code.google.com/p/mplayer-ce/downloads/detail?name=USB Test.rar

It will tell you if your USB is working with ehci (USB) module or not, and will create a report on your SD card.
If you have "USB Status : 0x3002" in the report file, then your Wii is one of the very rare consoles (I know only three cases), and your Wii will not work with cIOS not based on IOS 58.
As a result, not all games will work from USBloaders (as IOS 58 is not the most compatible with games).
Click to expand...

Dude

they told me to follow any Step 2 of modding wii guides, so i did and now Configurable USB loader is working and can play games from HDD, and thats mean there's someting has fixed
but still same problem with the USB Loader GX, what's the problem please ?

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.3U (v513)
Priiloader installed
Drive date: Unknown
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Console ID: 125491847
Boot2 v4
Found 128 titles.
Found 55 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS255[37] (rev 21006, Info: d2x-v6): Trucha Bug, NAND Access, USB 2.0
BC v6
MIOS v65535

Report generated on 2013/20/06.
 
Status
Not open for further replies.

Site & Scene News

Go to forum More news

Popular threads in this forum

Hardware  Help my Wii‘s broken !!!

Hacking Homebrew  OSCDL version 1.4.0

Wiiflow brings me back to sys menu... sometimes.

Emulation  Snes9x unacceptable input latency

Hacking  Wii randonly slowing down mid-game

All Channels Discussion

Hacking  AARTool for Wii archives

Iso Patch harder super mario bros wii

General chit-chat
Help Users
  • No one is chatting at the moment.
    SylverReZ @ SylverReZ: https://www.youtube.com/watch?v=uLN9qrJ8ESs