ROM Hack RELEASE New Super Mario Bros U Deluxe CHEAT file

  • Thread starter Thread starter merlin555
  • Start date Start date
  • Views Views 119,347
  • Replies Replies 234
  • Likes Likes 17
Were you able to send the cheat attachment? I didn't see it
In the picture I sent you I didn't see anything saying Bootloader
Post automatically merged:

Were you able to send the cheat attachment? I didn't see it

I have sent you a picture image but I am not sure you received it if so then disregard this message. But If you have not received the pictures then I will just tell you..... Inside the extracted folder for Atmosphere there is only 3 Folders showing... atmosphere...... Switch..... And hbmenu.nro
 
Last edited by lee101,
In the picture I sent you I didn't see anything saying Bootloader
Post automatically merged:



I have sent you a picture image but I am not sure you received it if so then disregard this message. But If you have not received the pictures then I will just tell you..... Inside the extracted folder for Atmosphere there is only 3 Folders showing... atmosphere...... Switch..... And hbmenu.nro
yes so for that copy the atmosphere folder the switch folder and the hbmenu.nro to root directory of your sd card i just checked and its the hekate+atmosphere package 3 that has the bootloader folder either way just copy everything exept the fuse.bin and lockpickrcm to root directory
 
Last edited by froggy55,
yes so for that copy the atmosphere folder the switch folder and the hbmenu.nro to root directory of your sd card i just checked and its the hekate+atmosphere package 3 that has the bootloader folder either way just copy everything exept the fuse.bin and lockpickrcm to root directory
I am having issues with Extracting The Firmware 20.5.0 Zip folder into its own folder as it has many different files inside itself for some reason my laptop is not allowing me to extract all thes files into one Extracted folder or within itself
Post automatically merged:

yes so for that copy the atmosphere folder the switch folder and the hbmenu.nro to root directory of your sd card i just checked and its the hekate+atmosphere package 3 that has the bootloader folder either way just copy everything exept the fuse.bin and lockpickrcm to root directory
I know it's late at least where I am at but after I copy over Keys to the Switch folder what do I do next since I did not use lock pick?
Post automatically merged:

yes so for that copy the atmosphere folder the switch folder and the hbmenu.nro to root directory of your sd card i just checked and its the hekate+atmosphere package 3 that has the bootloader folder either way just copy everything exept the fuse.bin and lockpickrcm to root directory
I'm getting a little worried as it's been 6 minutes since I rebooted after installing the updated through Daybreak..... It's now been 10 minutes
Post automatically merged:

yes so for that copy the atmosphere folder the switch folder and the hbmenu.nro to root directory of your sd card i just checked and its the hekate+atmosphere package 3 that has the bootloader folder either way just copy everything exept the fuse.bin and lockpickrcm to root directory
I do have about 900GB of Data/games installed so I hope that's why it's taking so long. It's been about 20 minutes so far. But I believe something is wrong 😔😔😔😔
 
Last edited by lee101,
I am having issues with Extracting The Firmware 20.5.0 Zip folder into its own folder as it has many different files inside itself for some reason my laptop is not allowing me to extract all thes files into one Extracted folder or within itself
Post automatically merged:


I know it's late at least where I am at but after I copy over Keys to the Switch folder what do I do next since I did not use lock pick?
Post automatically merged:


I'm getting a little worried as it's been 6 minutes since I rebooted after installing the updated through Daybreak..... It's now been 10 minutes
Post automatically merged:


I do have about 900GB of Data/games installed so I hope that's why it's taking so long. It's been about 20 minutes so far. But I believe something is wrong 😔😔😔😔
did you install on emunand or sysnand once the keys are copied over thats it for that all the other stuff i gave you you extract and drag and drop the fuse bin goes in the payloads folder which is inside the bootloader folder as long as you copied everything over properly it should work and when you used daybreak to install firmware did you make sure to select preserve settings i know when i first did it it took awhile to load into the system but i dont know your exact setup so when a made the tutorial i was assuming you were running everything from sdcard are you on emunand or stock emunand runs from sd well stock runs from internal system let me know so i can continue trying to help you thanks
 
did you install on emunand or sysnand once the keys are copied over thats it for that all the other stuff i gave you you extract and drag and drop the fuse bin goes in the payloads folder which is inside the bootloader folder as long as you copied everything over properly it should work and when you used daybreak to install firmware did you make sure to select preserve settings i know when i first did it it took awhile to load into the system but i dont know your exact setup so when a made the tutorial i was assuming you were running everything from sdcard are you on emunand or stock emunand runs from sd well stock runs from internal system let me know so i can continue trying to help you thanks
Emunand always have
Post automatically merged:

yes so for that copy the atmosphere folder the switch folder and the hbmenu.nro to root directory of your sd card i just checked and its the hekate+atmosphere package 3 that has the bootloader folder either way just copy everything exept the fuse.bin and lockpickrcm to root directory
I read that because of how much I have downloaded it can take a while but again it's only what I have read up on
Post automatically merged:

did you install on emunand or sysnand once the keys are copied over thats it for that all the other stuff i gave you you extract and drag and drop the fuse bin goes in the payloads folder which is inside the bootloader folder as long as you copied everything over properly it should work and when you used daybreak to install firmware did you make sure to select preserve settings i know when i first did it it took awhile to load into the system but i dont know your exact setup so when a made the tutorial i was assuming you were running everything from sdcard are you on emunand or stock emunand runs from sd well stock runs from internal system let me know so i can continue trying to help you thanks
It's still not booting up
 
Emunand always have
thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:

thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
what firmware were you previously on
 
thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
No worries you did nothing I am the one doing the work I obviously didn't do something right... But not sure what it was
Post automatically merged:

thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:


what firmware were you previously on
I did not select a payload would that have caused it?
Post automatically merged:

thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:


what firmware were you previously on
If so what payload do I select?
Post automatically merged:

thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:


what firmware were you previously on
After extracting the keys folder over I loaded into emunand but did not select any payloads .... I then went into daybreak and installed The Firmware as instructed.
Post automatically merged:

thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:


what firmware were you previously on
Not sure what the speed is but it's stuck on black screen not booting back up
Post automatically merged:

thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:


what firmware were you previously on
I was able to get it back into the payload menu with Launch.... More configs...... Payloads..... emuMMC
 
Last edited by lee101,
No worries you did nothing I am the one doing the work I obviously didn't do something right... But not sure what it was
Post automatically merged:


I did not select a payload would that have caused it?
Post automatically merged:


If so what payload do I select?
Post automatically merged:


After extracting the keys folder over I loaded into emunand but did not select any payloads .... I then went into daybreak and installed The Firmware as instructed.
Post automatically merged:


Not sure what the speed is but it's stuck on black screen not booting back up
can you get it into hekate
to force power down press and hold the power button for 12 seconds then power on and let me know if it goes to hekate
 
thats good so then maybe its just taking awhile to configure has anything happened yet or is it still on the switch logo also what speed is your sd card depending on that it could take longer my sd has the a2 on it i forget what it stands for but its what i was told to get for fgastest loading on switch
Post automatically merged:


what firmware were you previously on
I was previously on 20.4.0
Post automatically merged:

can you get it into hekate
to force power down press and hold the power button for 12 seconds then power on and let me know if it goes to hekate
I am on the hekate menu now
 
when you used daybreak it was after booting into the emunand right cuz i dont know of any way to use it in hekate
Yes
Post automatically merged:

when you used daybreak it was after booting into the emunand right cuz i dont know of any way to use it in hekate
But oddly there were 2 Daybreak apps....? Not sure why
 
Yes
Post automatically merged:


But oddly there were 2 Daybreak apps....? Not sure why
could haave been 2 different versions i only have one in homebrew menu is it still stuck on black screen and can you get to hekate
 
could haave been 2 different versions i only have one in homebrew menu is it still stuck on black screen and can you get to hekate
Yes
Post automatically merged:

could haave been 2 different versions i only have one in homebrew menu is it still stuck on black screen and can you get to hekate
I am there now it allowed me to boot back into hekate menu
 
what exactly did you copy over to your switch you did the atmosphere first then the hekate package the syspatch then missioncontrol all of those are drag and drop and select replace files are all these copied over to the switch specificaly mission control if it is not updated it can cause crashes also does it black screen after selecting launch then emmumc
 
what exactly did you copy over to your switch you did the atmosphere first then the hekate package the syspatch then missioncontrol all of those are drag and drop and select replace files are all these copied over to the switch specificaly mission control if it is not updated it can cause crashes also does it black screen after selecting launch then emmumc
I believe so I believe the only issue there could be was that one file with multiple files and I did not have an option to place them all in the same file I had to make a new folder to send them over to the switch or it would have sperated all the extracted files individually instead of all in one folder.... That could be the only thing I can think of
 
what exactly did you copy over to your switch you did the atmosphere first then the hekate package the syspatch then missioncontrol all of those are drag and drop and select replace files are all these copied over to the switch specificaly mission control if it is not updated it can cause crashes also does it black screen after selecting launch then emmumc
if it is black screening after launching emmumc it could be a corrupted atmosphere which means what you have to do is delete the atmosphere folder but before doing this i would back up all your cheats from the contents folder then delete and recopy the atmosphere i gave you and the hekate + atmosphere package 3 which is the updated version of hekate and the needed sig patches then you will need to recopy over the sys patch and mission control also do you know if your system is mariko because in the keys zip i gave there is a file called mariko partials as an experement before doing anything else try deleting that file and see what happens
Post automatically merged:

if it is black screening after launching emmumc it could be a corrupted atmosphere which means what you have to do is delete the atmosphere folder but before doing this i would back up all your cheats from the contents folder then delete and recopy the atmosphere i gave you and the hekate + atmosphere package 3 which is the updated version of hekate and the needed sig patches then you will need to recopy over the sys patch and mission control also do you know if your system is mariko because in the keys zip i gave there is a file called mariko partials as an experement before doing anything else try deleting that file and see what happens
also i was thinking if you were willing to send it to me i could fix it and send it back to you i live in california my guy at wayayeo is in texas however he does not do software only hardware that way he does ot get in trouble but yes i would be willing to fix the software side of things all i ask that you pay for shipping and handling if you are interested i can dm you my address and info so you can contact me im a very honest person i just want to get this running for you let me know what you think
Post automatically merged:

I believe so I believe the only issue there could be was that one file with multiple files and I did not have an option to place them all in the same file I had to make a new folder to send them over to the switch or it would have sperated all the extracted files individually instead of all in one folder.... That could be the only thing I can think of
the folder with all the files that was the 20.50 firmware right those need to be all in one folder so yes you would need to make a folder to extract them too so they are all in one folder however daybreak would have not worked if something was wrong with the as it auto validates the fw
 
Last edited by froggy55,
if it is black screening after launching emmumc it could be a corrupted atmosphere which means what you have to do is delete the atmosphere folder but before doing this i would back up all your cheats from the contents folder then delete and recopy the atmosphere i gave you and the hekate + atmosphere package 3 which is the updated version of hekate and the needed sig patches then you will need to recopy over the sys patch and mission control also do you know if your system is mariko because in the keys zip i gave there is a file called mariko partials as an experement before doing anything else try deleting that file and see what happens
Post automatically merged:


also i was thinking if you were willing to send it to me i could fix it and send it back to you i live in california my guy at wayayeo is in texas however he does not do software only hardware that way he does ot get in trouble but yes i would be willing to fix the software side of things all i ask that you pay for shipping and handling if you are interested i can dm you my address and info so you can contact me im a very honest person i just want to get this running for you let me know what you think
Post automatically merged:


the folder with all the files that was the 20.50 firmware right those need to be all in one folder so yes you would need to make a folder to extract them too so they are all in one folder however daybreak would have not worked if something was wrong with the as it auto validates the fw
I have no idea what that is
Post automatically merged:

if it is black screening after launching emmumc it could be a corrupted atmosphere which means what you have to do is delete the atmosphere folder but before doing this i would back up all your cheats from the contents folder then delete and recopy the atmosphere i gave you and the hekate + atmosphere package 3 which is the updated version of hekate and the needed sig patches then you will need to recopy over the sys patch and mission control also do you know if your system is mariko because in the keys zip i gave there is a file called mariko partials as an experement before doing anything else try deleting that file and see what happens
Post automatically merged:


also i was thinking if you were willing to send it to me i could fix it and send it back to you i live in california my guy at wayayeo is in texas however he does not do software only hardware that way he does ot get in trouble but yes i would be willing to fix the software side of things all i ask that you pay for shipping and handling if you are interested i can dm you my address and info so you can contact me im a very honest person i just want to get this running for you let me know what you think
Post automatically merged:


the folder with all the files that was the 20.50 firmware right those need to be all in one folder so yes you would need to make a folder to extract them too so they are all in one folder however daybreak would have not worked if something was wrong with the as it auto validates the fw
When I downloaded Hekate is does not have the atmosphere folder
 
Last edited by lee101,
I have no idea what that is
are you refering to what mariko is it is a type of chip that is used in the switch but not all of them have them also what do you think about me fixing your switch if you send it to me then i send it back to you its ok if you dont want to i know its hard to know who to trust but i assure i just want to get this fixed for you
 

Site & Scene News

Popular threads in this forum