Xenoblade Chronicles X cheats and mods

  • Thread starter Thread starter Ultimos54
  • Start date Start date
  • Views Views 645,490
  • Replies Replies 3,187
  • Likes Likes 57
I think the 255 viewed item prevent the affinity quest "Yelv's Partner" from initiating...
I've tried various ways to set the required item "B.B.'s left/right leg" to 1 on Ryujinx including the following







All of the above crashes on starting the game (Ryujinx). The only code works is "255 or 3 qty after viewing".



I've tried to find the difference between those 2 to see if there is any mechanism to use to modify it to 1 but failed. Can anyone please help?
I ran into the same issue after accidentally leaving the code on when browsing the inventory menu... ended up using Cheat Engine and the XCXDE tables that are on CR to correct it. Takes forever to run the script, but it does work as after setting the leg to '1' the quest was able to be taken.

The logic for that quest is interesting - requires that you have exactly 1 of the item and doesn't use an 'equal to or greater than' check, just an 'equals'...
 
I ran into the same issue after accidentally leaving the code on when browsing the inventory menu... ended up using Cheat Engine and the XCXDE tables that are on CR to correct it. Takes forever to run the script, but it does work as after setting the leg to '1' the quest was able to be taken.

The logic for that quest is interesting - requires that you have exactly 1 of the item and doesn't use an 'equal to or greater than' check, just an 'equals'...
What does "CR" mean? Can you please direct me to the address? Thanks!
 
Hello, is there a possibility someone would be kind enough to make a x2 ennemies hp or even change the multiplier for dmg done to 0,5 . Ennemies do not feel chunky enough once you get your build going.
 
I made a dmg reduce in half (damage reduce by 2) for both player and enemy. It's on my spreadsheet (in the opening post)

You can even go further with /4, /8, or even "almost" impossible /16 as well.
 
Hello, is there a possibility someone would be kind enough to make a x2 ennemies hp or even change the multiplier for dmg done to 0,5 . Ennemies do not feel chunky enough once you get your build going.
Found it, I did not know it existed it's a gold mine thank you for creating it !
 
  • Like
Reactions: Gamerjin
Anyone found codes for manipulating armor drop types yet, like weapon types? To only get left arms, right arms, chest pieces, etc.
I do wonder if anyone has a way to manipulate the drops for the illusive Wrothian Skell Weapons on that one Quest. It has the only Level 50 Variants of those specific WEapon Types.
 
Or a way that forces specific weapons to drop, such as Ultra Nebulan Dyads because weapon type is still far too unprecise if you need a single particular weapon with a particular trait combo
 
Not the case for me. During the New Skell On The Block affinity quest the molten refridgium and sylvalian tree sap don't appear.
I have the same problem, has anyone been able to solve it? I can't finish Liesel's Skell quest.
Post automatically merged:

I have the same problem. Has anyone been able to solve it? I can't finish Liesel's Skell quest.
Not the case for me. During the New Skell On The Block affinity quest the molten refridgium and sylvalian tree sap don't appear.
 
I have the same problem. Has anyone been able to solve it? I can't finish Liesel's Skell quest.
have you tried my spreadsheet to manually add the items you need?

@Everybody, i have now added a basic character editor, which allows editing the name/chest size, along with displaying the default chest sizes for the females.
 
Or a way that forces specific weapons to drop, such as Ultra Nebulan Dyads because weapon type is still far too unprecise if you need a single particular weapon with a particular trait combo
I actually made a thread on reddit to ask that and I got my desired trait
1. Go to feliciano
2. Have all your team members in your party that only uses dual guns
3. Have them equip the C&C set
4. Change MC's class to FMJ
5. Use treasure sensor augment as much as possible on your party (idk if it made drop better even with gold chest cheat so idk)
6. One shot feliciano with ares 90
7. Rinse and repeat

I think around 30 or 40 times, I already got good ultra nebulan dyads III
 
I actually made a thread on reddit to ask that and I got my desired trait
1. Go to feliciano
2. Have all your team members in your party that only uses dual guns
3. Have them equip the C&C set
4. Change MC's class to FMJ
5. Use treasure sensor augment as much as possible on your party (idk if it made drop better even with gold chest cheat so idk)
6. One shot feliciano with ares 90
7. Rinse and repeat

I think around 30 or 40 times, I already got good ultra nebulan dyads III
could you post a picture of the drop? im curious to see if i can re-create it....
 
Alternatively, I can start adding a party editor tab to my spreadsheet....
I think I have the party member address.
ok So I saw your Spreadsheet
this is very cool

I can almost understand it
I kind of want to start adding items for a build like Blossom Dance but I am too newb understand the build lol

So the good thing is that it looks like Elma's Default is 3F800000 which is the 1.0x

So for Lin is this kind of terrible
i don't know how to apply a code

I don't know what the numbers mean
I don't think they are hex

If Lin's 1.0x looks like this:

[Lin Bust Scale x1.0]
580F0000 01DD0408
780F0000 00006104
300E0000 00000003
640F0000 00000000 3F800000
780F0000 00000004
310E0000

Lin has 3 values:
3F47AE14
3F428F5C
3F333333

Elma just has the 3 of the same value

I could I guess add the value like this:
580F0000 01DD0408
780F0000 00006104
300E0000 00000003
640F0000 00000000 3F47AE14
780F0000 00000004
310E0000

I don't know more than that

The Silver Lining is that this spreadsheet is so good I know all the codes for the others now lol
I could do Neilnail and Mia...
 
ok So I saw your Spreadsheet
this is very cool

I can almost understand it
I kind of want to start adding items for a build like Blossom Dance but I am too newb understand the build lol

So the good thing is that it looks like Elma's Default is 3F800000 which is the 1.0x

So for Lin is this kind of terrible
i don't know how to apply a code

I don't know what the numbers mean
I don't think they are hex

If Lin's 1.0x looks like this:

[Lin Bust Scale x1.0]
580F0000 01DD0408
780F0000 00006104
300E0000 00000003
640F0000 00000000 3F800000
780F0000 00000004
310E0000

Lin has 3 values:
3F47AE14
3F428F5C
3F333333

Elma just has the 3 of the same value

I could I guess add the value like this:
580F0000 01DD0408
780F0000 00006104
300E0000 00000003
640F0000 00000000 3F47AE14
780F0000 00000004
310E0000

I don't know more than that

The Silver Lining is that this spreadsheet is so good I know all the codes for the others now lol
I could do Neilnail and Mia...
right, so it looks like lin has a...."custom" bust size, that's why i constructed the code in a way so that if you wanted custom sizes, it was possible. in Lin's case, her default bust size code would be:
Code:
[Lin's new data]        
580F0000 01DD0408        
400C0000 00000000 00006104        
680C11F0 3F47AE14 3F428F5C        
640C01F0 00000000 3F333333
you would have to manually add this code to your code file, its basically a "run once and delete it once confirm" type code.
i kinda mean for this to be a way to fix what my asm resizer code did, as i didnt have a way to restore those values......
 

Site & Scene News

Popular threads in this forum