ROM Hack Cheat Codes AMS and Sx Os, Add and Request

[TomSwitch]

It was so easy the first time, but I couldn't reproduce it again. I got what I put in the photos, wanting to delete all the addresses and it didn't work.
Resetting the switch in each game takes a lot of time (Well, not as much as Edizon SE but here you are on the safe side)

Post automatically merged: Dec 9, 2024

Edizon Se is pure pointers (better for me) does nothing about ASM.
1.-You need the value and use its same pointer searcher or sometimes
2.-You need the value . 2 dumps , pointer searcher and wala

Post automatically merged: Dec 9, 2024

Maybe I was confused when uploading the photos when trying to replicate it, the first time I could, the second time I couldn't.
(I don't know how photos are saved in gen 2 fork)
How do you know there is only 1 write breakpoint in the photo?

Post automatically merged: Dec 9, 2024

Nope, I always use freeze codes and when I enter the search it doesn't freeze as you say maybe not all games can be played so that could be a problem because they always kill the player and you don't advance in the search.
Edizon always freezes the game (if I remember correctly).

PS: that image is from breeze 98 I didn't have that breeze and it did appear once and I changed it to 10000 but I don't know who that photo belongs to

I suspect it is the game, there is no reason for EdiZon SE being more reliable, Breeze should be better in every way except your familiarity with EdiZon SE. If you just want to do pointer it is fine, you don't need to do ASM if you don't want to. You can even continue to use pointer search se if you prefer that although I have not for a very long time, Breeze pointer search is good enough for every game so far for me since I made it good enough. If you don't do direct wifi transfer and instead do that dump to file copy to pc method then you need EdiZon SE as I already don't use that method long before I started Breeze.

 

[Maq47]

yes in those photos that I sent it says above "max trig" = 0


To delete old records, do I need to press "erase old results" inside gen2 fork?

And to save the "max trigger" what do I do? Do I reset the switch or do I have to change to "max trigger" every game?

You need to set Max Trigger to a higher number, not 0. Try 10000.

 

[Jericoss]

I suspect it is the game, there is no reason for EdiZon SE being more reliable, Breeze should be better in every way except your familiarity with EdiZon SE. If you just want to do pointer it is fine, you don't need to do ASM if you don't want to. You can even continue to use pointer search se if you prefer that although I have not for a very long time, Breeze pointer search is good enough for every game so far for me since I made it good enough. If you don't do direct wifi transfer and instead do that dump to file copy to pc method then you need EdiZon SE as I already don't use that method long before I started Breeze.

The game in this case is not @arismendy64 was also able to reproduce it like me at the beginning and left sample photos.

You're right, I've never been able to get familiar with breeze, I've always tried because it has so many things to cheat on switch, I always try, I let a long time go by and I always end up giving up. Maybe I'll never be able to use it.
But Edizon SE is super practical and mechanical, there's no doubt about it, it only handles 2 values that you can change with a button and I think it's just one game,I think that in a single game that I tried I couldn't find the cheat, maybe there are more cases, I only got one of all the cheats I did.I don't remember the game, but I do remember that the cheat was super long, it had like 15 lines apart from its offset. haha that cheat is crazy.
I use the pointer searcher that Edizon has integrated. There is always an answer in it. If it is more difficult, I use the master Noexs.

 

[TomSwitch]

You're right, I've never been able to get familiar with breeze, I've always tried because it has so many things to cheat on switch, I always try, I let a long time go by and I always end up giving up. Maybe I'll never be able to use it.
But Edizon SE is super practical and mechanical, there's no doubt about it, it only handles 2 values that you can change with a button and I think it's just one game, I haven't been able to find a cheat.
I use the pointer searcher that Edizon has integrated. There is always an answer in it. If it is more difficult, I use the master Noexs.

It's fine for you to want to stay with EdiZon SE. I learned when I first made something for other people to use that what I think to be improvement may not be so to some users, getting people to like change is never easy. That is probably the reason everything from Apple is same old same old since Steve Jobs died.

 

[Jericoss]

It's fine for you to want to stay with EdiZon SE. I learned when I first made something for other people to use that what I think to be improvement may not be so to some users, getting people to like change is never easy. That is probably the reason everything from Apple is same old same old since Steve Jobs died.

I agree with you, I have never liked Apple
but at least for me making a cheat “the order of the factors does not alter the product” as long as I can achieve the cheat.
If I could go back to breeze 86 I would do it, I never had a problem

Post automatically merged: Dec 10, 2024

You need to set Max Trigger to a higher number, not 0. Try 10000.

I did it for myself and it only worked once.

 

[TomSwitch]

I agree with you, I have never liked Apple
but at least for me making a cheat “the order of the factors does not alter the product” as long as I can achieve the cheat.

There are three methods for creating cheats. Advanced ASM is the most versatile, capable of making cheats for any game, but it requires a high level of expertise. The other two methods, Easy ASM and the pointer method, are simpler and faster but are not compatible with every game. Breeze supports both Easy ASM and the pointer method, while EdiZon SE supports only the pointer method.

EdiZon SE also don't freeze the game for you by default. I think I might have put in an option to automatically freeze the game when you start EdiZon SE, but in that case you can't just exit with home button. Anyway if you are going to die when you press home you probably would be dead by the time EdiZon SE freeze the game for you.

 

[Jericoss]

There are three methods for creating cheats. Advanced ASM is the most versatile, capable of making cheats for any game, but it requires a high level of expertise. The other two methods, Easy ASM and the pointer method, are simpler and faster but are not compatible with every game. Breeze supports both Easy ASM and the pointer method, while EdiZon SE supports only the pointer method.

I'm on the lowest rung, what a shame, sorry!!

 

[TomSwitch]

I'm on the lowest rung, what a shame, sorry!!

Easy ASM is suppose to be easy if I am able to teach it properly. I don't think pointer search is easier. I suppose it was the only way earlier and people were more motivated to learned it which makes it seem easy to them compared to easy ASM.

The super easy cheat is static cheat, the next one should be the very easy asm, then pointer, then more complex easy asm.

 

[dsrules]

Maybe I was confused when uploading the photos when trying to replicate it, the first time I could, the second time I couldn't.
(I don't know how photos are saved in gen 2 fork)
How do you know there is only 1 write breakpoint in the photo?

ldr = read
str = write

 

[Jericoss]

Easy ASM is suppose to be easy if I am able to teach it properly. I don't think pointer search is easier. I suppose it was the only way earlier and people were more motivated to learned it which makes it seem easy to them compared to easy ASM.

The super easy cheat is static cheat, the next one should be the very easy asm, then pointer, then more complex easy asm.

No, pointer searcher is super easy and mechanical, so to speak (and they say that in breeze if so many things and values did not exist, it would still be like that.)
Easy ASM is more difficult than pointer search, it is not mechanical. You need to know at least a little about ASM and pointer can be done by anyone because it is mechanical.

 

[TomSwitch]

@Jericoss
Example of very easy ASM, of course you still need to learn a few instructions
for example fsub means subtracting a floating point number

You watch money and it hit on the line on the cursor, you watch this line and it only access money, you look above this line and you see subtraction, you try making d8 a big negative number like -1000

If you are lucky then you are done. ( no body is always lucky )

Normally I will always try my luck with ASM first, then I try pointer, then I try more complex ASM

 

[Jericoss]

@Jericoss
Example of very easy ASM, of course you still need to learn a few instructions
for example fsub means subtracting a floating point number
View attachment 475109
You watch money and it hit on the line on the cursor, you watch this line and it only access money, you look above this line and you see subtraction, you try making d8 a big negative number like -1000
View attachment 475110
If you are lucky then you are done. ( no body is always lucky )

Normally I will always try my luck with ASM first, then I try pointer, then I try more complex ASM

which is about:
1.- value of the cheat
2.- in breeze (jumback or something like that) put 4 3 800 or 3 more examples of these I don't know 6 2 800, 8 3 400
3.- Exit reset try results.
it's all that easier than this, this is mechanical 1,2 3 etc.


View attachment 475110
If you are lucky then you are done. ( no body is always lucky )

Yes, that example is easy. An ordinary person would not know what to do with the second photo or where it came from.

 

[TomSwitch]

spend currency add 1000
[Main+R0+0x00018B8D4C]= fsub d0, d0, d8 ; I store the original here
[Main+R0+0x00018B8D4C]= b #0x5c746c8 ; this branch to code cave
[Main+R0+0x0005C746C8]= ldr d8, #0x5c746d4 ; simply load the value at the last line
[Main+R0+0x0005C746CC]= fsub d0, d0, d8 ; now d8 is -1000, so instead of paying the price you gain 1000
[Main+R0+0x0005C746D0]= b #0x18b8d50 ; return from code save
[Main+R0+0x0005C746D4]=dbl:-1000.000000

I think you already know this one

 

[Jericoss]

spend currency add 1000
[Main+R0+0x00018B8D4C]= fsub d0, d0, d8 ; I store the original here
[Main+R0+0x00018B8D4C]= b #0x5c746c8 ; this branch to code cave
[Main+R0+0x0005C746C8]= ldr d8, #0x5c746d4 ; simply load the value at the last line
[Main+R0+0x0005C746CC]= fsub d0, d0, d8 ; now d8 is -1000, so instead of paying the price you gain 1000
[Main+R0+0x0005C746D0]= b #0x18b8d50 ; return from code save
[Main+R0+0x0005C746D4]=dbl:-1000.000000

I think you already know this one

yes

 

[TomSwitch]

which is about:
1.- value of the cheat
2.- in breeze (jumback or something like that) put 4 3 800 or 3 more examples of these I don't know 6 2 800, 8 3 400
3.- Exit reset try results.
it's all that easier than this, this is mechanical 1,2 3 etc.


View attachment 475110
If you are lucky then you are done. ( no body is always lucky )

Yes, that example is easy. An ordinary person would not know what to do with the second photo or where it came from.

pointer search require some base amount of effort so the very easy ASM is easier, pointer search also have different difficulty level so it may not be easier than the more complex ASM. Different game different method, to me most games easy asm, some game pointer is easier but then the effort may move to more testing and more uncertainty that it may be not good later in the game. Complex ASM is also more likely to stop working later than easy ASM.

 

[Jericoss]

I wonder what would be better for my switch as it is right now, I don't think I'll do any update.
Im in:
Breeze ???
Firmware 18.1.0
AMS 1.7.1

What I don't understand is why there are things that work for other people and when I try to do it, it never works the same way, even if I follow the same steps.
optantic made the two easiest ASM videos in the world and I could only do 1 of them once. The second one, I couldn't even get the first step right. How bad for me.
I had never dared to follow an ASM tutorial because after 4 or 5 steps they skip to 10 assuming that you know how to do it and you lose everything.
Bad luck for me again

 

[TomSwitch]

I wonder what would be better for my switch as it is right now, I don't think I'll do any update.
Im in:
Breeze ???
Firmware 18.1.0
AMS 1.7.1

I have two Switch one is on 18 the other on 19, I am not ware of any need to go 19. I go 19 only because I want to update Breeze for 19.

The latest version of Breeze is beta98. If you are already on 97 the main change is integration of ftpsrv. It make it slightly more convenient if you are using ftp with Switch. I have no plan to drop support for atm1.7

 

[Jericoss]

I have two Switch one is on 18 the other on 19, I am not ware of any need to go 19. I go 19 only because I want to update Breeze for 19.

The latest version of Breeze is beta98. If you are already on 97 the main change is integration of ftpsrv. It make it slightly more convenient if you are using ftp with Switch.

what this mean?

the main change is integration of "ftpsrv". It make it slightly more convenient if you are using "ftp" with Switch.

 

[TomSwitch]

what this mean?

the main change is integration of "ftpsrv". It make it slightly more convenient if you are using "ftp" with Switch.

ftpsrv has this mount point feature which I customized for Breeze to add game directory and game save for the current game

Most game the save is not available while the game is running. save0 means profile 0 and save1 means profile 1.
I don't hack save that often which is why I did not port game save feature to Breeze from EdiZon SE. Now with ftpsrv you can do save hack with Breeze too.

 

[Az91]

@Jericoss @TomSwitch
Hello.
Maybe this doesn't concern me but I would still like to give my feedback on the efficiency of breeze.
All the cheats I have shared so far that go through ASM absolutely all without exceptions are compiled only one same code cave.
ldr , a
str
b code1+4
a: .word 9999 (Last line to modify if it is a float)
Good evening