"unknown pkg1 version hos version not supported" on new card

[lizzie]

Hi,

I had a 64GB sd card for my hacked switched but decided to upgrade to a 128GB one. Unlike other people who have encountered this issue, i decided to just follow the guide all over again on switch.homebrew.guide, and start from scratch.
However, when I boot the emuMMC, i get :

" unknown pkg1 version
HOS version not supported or emummc corrupt
failed to launch HOS "

I'm sure I did everything correctly, I did it twice and the sd card was properly formatted, but i still get the error. is there something else i should do?

 

[Sphaa]

Are you sure you have the latest Hekate? I'm pretty sure that error comes when Hekate isn't updated to support the latest firmware.

 

[lizzie]

Are you sure you have the latest Hekate? I'm pretty sure that error comes when Hekate isn't updated to support the latest firmware.

i downloaded it today from the guide, it's "hekate_ctcaer_6.0.3_Nyx_1.5.3" that should be the latest version right? and booting from the old card works. might be a card issue?

 

[linuxares]

i downloaded it today from the guide, it's "hekate_ctcaer_6.0.3_Nyx_1.5.3" that should be the latest version right? and booting from the old card works. might be a card issue?

What does your hekate_ipl.ini look like?
It might be your fusee is just not right.

 

[Sphaa]

Maybe a stupid question but you did create a new emuMMC on the new card, right?
You can try to copy the bootloader and atmosphere folder from the old, working card into the new - just to try.
If that's not working, I don't have any other ideas other then trying a new SD-card

 

[lizzie]

What does your hekate_ipl.ini look like?
It might be your fusee is just not right.

these are the contents :

[config] autoboot=0 autoboot_list=0 autohosoff=1 autonogc=1 backlight=100 bootwait=3 updater2p=0 [CFW (sysMMC)] emummc_force_disable=1 fss0=atmosphere/package3 icon=bootloader/res/icon_payload.bmp [CFW (emuMMC)] emummcforce=1 fss0=atmosphere/package3 icon=bootloader/res/icon_payload.bmp [Stock] emummc_force_disable=1 fss0=atmosphere/package3 icon=bootloader/res/icon_switch.bmp stock=1 [Fusee] icon=bootloader/res/icon_payload.bmp payload=bootloader/payloads/fusee.bin

Maybe a stupid question but you did create a new emuMMC on the new card, right?
You can try to copy the bootloader and atmosphere folder from the old, working card into the new - just to try.
If that's not working, I don't have any other ideas other then trying a new SD-card

yes i did create a new emummc. it might be an sd card issue, but i dont see why :/

 

[linuxares]

Can you boot "sysmmc"?

 

[lizzie]

Can you boot "sysmmc"?

yes, it works.

 

[linuxares]

yes, it works.

Then it's something with the emu.

Try using this - https://rentry.org/SwitchHackingIsEasy