Cannot Access Atmosphere after 15.0.1 switch update

[brifye24]

Hello, I am having some problems booting into CFW after I updated my switch to 15.0.1 using daybreak. I have tried reinstalling atmosphere 14.1 to no avail. It will boot up into Hekate 6.02, but when I try to load the cfw on the emmuc, it will briefly show the atmosphere logo than black screen. Same thing happens when I try to load the fusee.bin file as well.

Any ideas on what this could be?

Thank You

Update: Thanks Dothackjhe, I did replace the Fusee.bin in the payloads folder and it booted right up. I have been sitting here trying to figure it out for the last 4 hours. I have been deleting and starting from scratch everytime. Thank you for your help.

 

[impeeza]

you need latest atmosphère version, download the latest from github
https://github.com/Atmosphere-NX/Atmosphere/releases
you also need to update all your homebrew, overlays and so, I do recommend to bakcup the SD:/Atmosphere/contents folder and rename or delete from your SD card before next boot.

the first boot can take longer as usual but only the first one.

 

[Dothackjhe]

Make sure you're using the latest version of fusee.bin. It can be easily overlooked since you'd have to manually navigate your way into the /payloads/bootloader folder just to place it.

 

[Jmtaveira]

I had the same problem , must be a plugin or something , just rename your old atmosphere folder and see if you can boot with the new one .

 

[brifye24]

I did download the latest official release of atmosphere. It did allow me to boot into atmosphere after the initial load. When I took the SD card out to install octopath traveler 2, it has ceased to work.

 

[Hayato213]

I did download the latest official release of atmosphere. It did allow me to boot into atmosphere after the initial load. When I took the SD card out to install octopath traveler 2, it has ceased to work.

Should learn to do usb install, so you don't have to take out the SD card, anyway what is the SD card format?

 

[brifye24]

The SD card is in EXfat, I usually do install through goldleaf, but I was having an issue with not being able to return to the homescreen while playing SaGa frontier.

 

[Hayato213]

The SD card is in EXfat, I usually do install through goldleaf, but I was having an issue with not being able to return to the homescreen while playing SaGa frontier.

Don't use exFAT, use FAT32, something corrupted that is my guess.

 

[brifye24]

Thanks to Dothackjhe I was able to get it working, I just updated Fusee in the bootloader folder. I've never had to do that before.

 

[Hayato213]

Thanks to Dothackjhe I was able to get it working, I just updated Fusee in the bootloader folder. I've never had to do that before.

Usually each build require newer fusee.bin, it is Atmosphere bootloader.

 

[Dothackjhe]

Thanks to Dothackjhe I was able to get it working, I just updated Fusee in the bootloader folder. I've never had to do that before.

Glad it worked for you.

 

[linuxares]

Usually each build require newer fusee.bin, it is Atmosphere bootloader.

Not always, but often.

 

[impeeza]

and remember not only update the file on SD:/bootloader/payloads, you also may be need to update your payload injector, that's why I do prefer ArgonNX-SE you never need to update your injector, and then you only need to update your payloads on a folder, if you configure Hekate to replace Rebootpayload then you don't need update that too.

 

[DPyro]

What if you use sx core?

 

[impeeza]

What if you use sx core?

I really don't know, as far I remember SX Core have his own payload which search for a file on the SD Card so you don't update the SX Core instead update the file on your SD Card or the payload what that file chainload.

 

[JackTheFroster]

What if you use sx core?

If you want to use the dongle from Team Xecuter or have the modchip installed, you only need to have the boot.dat from sx gear and the boot.ini that includes the path and name for the payload you wanna use. default is payload.bin, so only update the payload.bin.

Also, idk why, but i never had issues with exfat on my micro sd cards. i always like the convenience of files larger than 4gb and the only problems with micro sd cards i had were fake ones (like a no brand 1tb for around 40€ which definitely is a scam)

 

[brifye24]

Not always, but often.

I don't think I have had to change the fusee.bin in the bootloader folder before, unless it was already packaged in an install.