GameCube Backup Launcher 0.2

Where does this go on the SD?

[quote name='Sarius24' post='1868539' date='Apr 2 2009, 10:26 AM']Where does this go on the SD?[/quote]

what part do you mean?

nvm got the game to work....now the screen is in black and white and it's flickering like crazy O,o

usa wii's dont like playing gamecube games for some reason, somthing about running them in pal 60hz

So there's now way of fixing that huh?

he's working on it i beleive,
im lucky to have a pal wii. havent had any game issues at all.

I've got the HBC and Backup Loader 0.3 with the 002 fix installed, but I've since updated to v4.0. Does this prevent me from running/installing the backup loader, or can I start it up directly through the HBC instead of installing it to the menu?

My apologies for my general stupidity, especially if this has been asked before, and thanks in advance.

just try running the ios installer, see if it works or not

Hey WiiGator.... First off, THANKS for this awesome Loader. Everyone has wanted a WII GC loader for years now and you finally pulled it off. You are THE MAN, and thanks again for what must have been a lot of grueling hours of hard work.

On a lighter note, your last two versions have worked great, but the current version 2.0 caused my gamecube controller to stop working once the game loads. The controller works fine during your backup launcher screen, but once the game loads none of the buttons will respond. I cant press "start" to load the game or anything else, so the opening videos just keep looping. I have tested the games and controller with your previous versions and they work perfectly, but 2.0 gives me a complete GC controller failure in the game.

Just for reference, ..... softmodded Wii only, no hard mods, never updated, version 3.1U, twilight hack with gamma loader and your GC blackup launcher. Games are backups, some multi, some single, all working fine with previous versions, just not 2.0. Hope that helps.


-Slick

Hey, I just want to compliment you on this excellent release - everything I've fired at it (at least that was confirmed to work by the compatibility list) has worked flawlessly! Thank you for making this so easy to install and use.

The one problem I've had with it so far is with Beyond Good and Evil (ntsc, non-shrunken), burned on its own DVD. It loads fine and makes it to the language selection screen, but doesn't recognize any controller input (it's not frozen, the menu still moves and all - I just can't affect anything on-screen). I can't seem to figure out exactly what's causing this problem, and I haven't seen anyone else with it after searching for awhile. My guess is because I actually have a previous BG&E save on my memory card, it's somehow interfering with it? Chances are I'm wrong, and I was wondering if anyone had any ideas. I've tried loading it in as many different ways as I can and have patched the MIOS, but haven't made any difference.

EDIT: Yeah, slick1109 - that's the exact same issue I'm having. But other games I've tried have worked perfectly fine - BG&E is the only one I've run into this with so far.

Im thinking about trying this but i was wondering if NTSC gc games will work on a PAL wii console ?

they do but some dont

Okey thanks for the answer, is there any straight forward guide to how to install this?
Im pretty new at this just managed to get the USB loader in but thats it, got 3.2e firmware.

I have a question...
Are saves from Theta working?

I'd change them to work in Xi, but the Gamecube Save Extractor doesn't work with official memory cards.

when using the memcard reader what slot is the card in?

[quote name='LeonardoGolden' post='1876982' date='Apr 4 2009, 05:58 PM']I have a question...
Are saves from Theta working?[/quote]

If they didn't work in Xi they won't work in 2.0
The reason they don't work is because of the wrong file name and if you can't change that then either wait for or make an app that works on official memory cards or just make new saves.

hi i just downloaded the GC Backup loader 0.2, but i have no idea what to do with it, as it is not a dol file so i cant run it through homebrew, btw its a .file2 file

Loader was working great for me earlier today, but then I disconnected my wii and reconnected it downstairs, and ever since I've been getting a black and white scrolling screen after loading my multigame disc. I'm assuming this is because it is auto detecting it as PAL, however I setup the ISO to be NTSC-U and all of the ISOs on it were NTSC-U also. I don't know why it worked fine moments before, and only after reconnecting I get this error. It might be due to using a different tv, but I really hope a solution becomes available for this problem soon. I want to play Kirby Air Ride XD.

[quote name='trio3' post='1877257' date='Apr 5 2009, 10:04 AM']hi i just downloaded the GC Backup loader 0.2, but i have no idea what to do with it, as it is not a dol file so i cant run it through homebrew, btw its a .file2 file[/quote]

did you download it from the blog, make sure you are looking the the zip properly

[quote name='nitrostemp' post='1878406' date='Apr 5 2009, 08:20 AM'][quote name='trio3' post='1877257' date='Apr 5 2009, 10:04 AM']hi i just downloaded the GC Backup loader 0.2, but i have no idea what to do with it, as it is not a dol file so i cant run it through homebrew, btw its a .file2 file[/quote]

did you download it from the blog, make sure you are looking the the zip properly
[/quote]
yeah i just got it from the blog, got the zip/rar file and all it had in it was a file called '[5133]gcbackup0.2'. and it was a the type is called 'File 2'.