Hacking WiiFlow-Mod and Emunand

[AbdallahTerro]

Hello. Can't quite get it working in wiiflow, I edited the ini in wiiflow 4.1.4 properly. I also am able to play games from neek2o from the system menu. However in Wiiflow i don't have this option from the NAND settings " In Wiiflow 4 and go to nand/channels mode, select emunand from source menu" I just have OFF, FULL, PARTIAL. Full Seems to work, is this ok?

All my NES games are showing in the wiiware menu, should they be in the NES menu? How do i fix?

the neek2o option is found in game setting and not in general setting

 

[hards]

for disc channel you need to have either:
0. A DVD drive that supports backups (old wiis have this but not new ones)
1. Darkcorp (not anymore recommended)
or
2. Neocorp hack (check my sig for Disc channel hack thread)
or
3. Priiloader using ios 249 or 250 (d2x cIOS should be installed first) to load system menu

I prefer option 2 however option 4 aka USB loaders is streets ahead

thank you for your reply i think that the neocorp hack is beyond me as i am new at this sort of thing, what i have done so far is that i have used modmii to hack my console and i am in the process of useing this guide wiiflow - mod and emunand as i would like to play different games like a virtual console , but what i have noticed is that some games that are burnt to disc dont work , allthough all our games are burned the same way , we have got a old wii console with a dvd drive and have priloader using ios249 , is there any way to check if the games are faulty or not before burning them to disc , i do use a usb hard drive as well for the games but i like to have them doulbled up incase the drive goes down .

 

[AbdallahTerro]

not all games will work this way on the Wii, you can check if they are faulty by testing on PC using Dolphin emulator

 

[hards]

thanks for your reply are you adviseing that if i want to play a game from a disc that it wont work allways,? i did try dolphin 4.0 but they would not even load up with that , is there a guide i can try that will let me create a virtual consle for all differnet emulator games as well as playing from hard drive and wiiflow , neogamma , cfg, as well as the disc channel etc thanks

 

[AbdallahTerro]

Dolphin always works for me, but it's picky when it comes to hardware (you need a fast PC and decent GPU)
My Wiiflow Master pack has all emulators ready to be used with wiiflow, you just need to copy your games
Check the website and let me know if you need any further help

 

[hards]

thank you for your reply when i try and run neek20 i get a execption dsi error ..


sysCheck v2.1.0b18 by Double_A and R2-D2199
...runs on IOS58 (rev 6176).

Region: PAL
System Menu 4.3E (v514)
Priiloader installed
Drive date: 2007.02.13
Homebrew Channel 1.0.0 running on IOS0
Hollywood v0x11
Console ID:
Boot2 v4
Found 95 titles.
Found 57 IOS on this console. 3 of them are stub.

IOS4 (rev 65280): Stub
IOS5 (rev 514): Trucha Bug ES Identify Flash Access NAND Access
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug ES Identify Flash Access NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug ES Identify NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug NAND Access
IOS61 (rev 5661): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug NAND Access
IOS80 (rev 16174): Trucha Bug NAND Access
IOS90 (rev 54321): Trucha Bug
IOS201 (rev 3094): Trucha Bug ES Identify NAND Access
IOS202[60] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS222[38] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access USB 2.0
IOS223[38+37] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access USB 2.0
IOS224[57] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS236[36] (rev 65535 Info: rev 3351): Trucha Bug ES Identify NAND Access
IOS245[37] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS246[38] (rev 21008 Info: d2x-v8final): Trucha Bug ES Identify NAND Access
IOS247[53] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS248[55] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS249[56] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS250[57] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS251[58] (rev 21008 Info: d2x-v8final): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2013/09/24.

 

[AbdallahTerro]

Syscheck won't help
what matters is your emunand is on "First Active Fat32 Partition"
and that sneek folder is on the root of this device

 

[hards]

Syscheck won't help
what matters is your emunand is on "First Active Fat32 Partition"
and that sneek folder is on the root of this device

thank you for your reply how do i First Active Fat32 Partition but i am sure that it is active and that sneek folder is on hd drive

 

[AbdallahTerro]

that's made using format/partition tools such as Paragon and Aomi

 

[hards]

that's made using format/partition tools such as Paragon and Aomi

thank you for your reply the drive is active with fat32 checked with EASEUS Partition Master 9.1.0 Professional Edition , the sneek folder is on the root of the hd drive but i still get a dsi error when i open neek20

 

[AbdallahTerro]

what emunand are you using? in "nands" folder?

 

[hards]

what emunand are you using? in "nands" folder?

i sorry i dont understand what you mean ? are you asking about what games ? or channels in emulation ? thanks

 

[AbdallahTerro]

neek2o needs a nand dump or emunand made with modmii
you can consult neek2o thread in hacking section or read my guide: https://dl.dropbox.com/u/101209384/MasterPiece/Neek_Guide.html

 

[hards]

thank you for your reply i have dl the masterpiece but unsure where everything goes and how to install dios after looking at your guide i do remember doing the emunand with modmii but i dont think i said about installing wads i dont remeber that part thanks

 

[hards]

hi i have decided to try this again , when i tell modmii to copy wads from temp wad to emulated nand:copy to usb\nands\pl_us\ but i cannot see the wads in this folder , thanks

 

[AbdallahTerro]

try showmiiwads, as mentioned in the guide
it can both install wads and show nand titles under "view > nand" option

 

[hards]

hi thankyou for your reply can you please advise if i have done this right as i am not sure thank you

4.3E Emulated NAND created by ModMii on 28/09/2013
==================================================
setting.txt built using this serial:
Custom System Menu Theme Installed - Dark Wii Green
WiiFlow Forwarder Channel Installed
nSwitch Channel Installed
Post Loader Forwarder Channel Installed

 

[AbdallahTerro]

Looks ok
Copy both nands folder and sneek folder to usb fat32 partition now and test it

 

[hards]

thank you for your reply i have put both folders on to usb drive , but when i go into wiiflow and then emualtor i dont see this Custom System Menu Theme Installed - Dark Wii Green just a plain screen with boxes on them , do i have to install homebrew on hard drive to install the wad as it says that you have to install wads on both real and emunand , also when i run emulator through wiiflow it finds 78 dos games they dont seem to work , another problem that i have noticed is that if i switch the console of and back on again it does not boot to bootmii with the sd card in but if i take the sd card out it will boot to priloader ,
also when useing the nand extractor it says that the had drive is not fat32 when it is , the drive is 3 to 4 tb if this makes any diffenrence thanks

 

[AbdallahTerro]

Wiiflow displays covers only, if you want to see your darkwii theme you need to use the nswitch channel not wiiflow.
and AFAIK 3-4 TB drives are not supported yet