Hacking WiiFlow-Mod and Emunand

[hards]

Wiiflow displays covers only, if you want to see your darkwii theme you need to use the nswitch channel not wiiflow.
and AFAIK 3-4 TB drives are not supported yet

thank you for your advice how big can the hard drive be to get my console like you have in your Masterpiece Pack link thanks

 

[AbdallahTerro]

about HDD up to 2 TB max should be fine
about wii games and cfg you need to change IOS for some games to 250 (given that you have standard d2x cIOS bases 56 and 57 in slots 249 and 250) d2x v10 or v10alt is recommended

 

[hards]

about HDD up to 2 TB max should be fine
about wii games and cfg you need to change IOS for some games to 250 (given that you have standard d2x cIOS bases 56 and 57 in slots 249 and 250) d2x v10 or v10alt is recommended

thank you for your reply i will get a hdd max size 2tb , but i know that d2x cIOS has not be installed, i use wiiflow and cfg to load wbfs or iso from hdd but i have never done anything before to do with wiiflow mod and emunand, would this work if i put wiiware and virtual console games on 1 drive and wbfs and iso on the other drive but going through the same console thanks

 

[AbdallahTerro]

you can everything on single FAT32 partition of only 1 drive say 1-2 TB,
if you want to split you can have 2 partitions ex FAT32 first and NTFS second, then use FAT32 for nands and emulators and GC and use NTFS to store your Wii games

 

[hards]

you can everything on single FAT32 partition of only 1 drive say 1-2 TB,
if you want to split you can have 2 partitions ex FAT32 first and NTFS second, then use FAT32 for nands and emulators and GC and use NTFS to store your Wii games

thankyou for your reply i have ordered a seagate expansion drive 2tb should be here tomorrow , then i will try again thanks for your help

 

[jmsalal]

Recently, I updated my softmod via the "Softmod Any Wii" tutorial on Wiihacks.com. I have nearly torn my hair out as a noob trying to get NAND emulation to work and finally thought I had found a good solution with Neek2o. Unfortunately, I can't get the mode to launch. I followed this guide, yet I am unable to get into Neek2o by any means: SM forwarder channel (hangs after showing "Reloading bootmii IOS); Wiiflow 4.2 (just freezes on a black screen when I try to launch from my real NAND exit to Neek2o mode, or launch a game with Neek2o); Postloader4 (black screen when I try to select "Neek Mode"). I followed the guide except that I selected Neek2o rev 96. Has anyone run into this or a similar problem? I'd really like to get Neek2o up and running. Thanks for bearing with me, I'm a noob :-)

 

[AbdallahTerro]

I need more info: how did u make your nand (extracted vs modmii or my premade one) also are you using HDD or USB flash device and finally what format, size and cluster size?
a syscheck would be useful too

 

[jmsalal]

I need more info: how did u make your nand (extracted vs modmii or my premade one) also are you using HDD or USB flash device and finally what format, size and cluster size?
a syscheck would be useful too

My nand was extracted w/ ModMii, and I'm using a 1TB FAT32 32kb clusters USB HDD. Here's my syscheck:

sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
...runs on IOS58 (rev 6176).

Region: NTSC-U
System Menu 4.1U (v449)
Priiloader installed
Drive date: 2008.12.18
Homebrew Channel 1.1.0 running on IOS58
HomebrewFilter ist nicht installiert
Hollywood v0x21
Console ID: 152668914
Boot2 v4
Found 122 titles.
Found 56 IOS on this console. 6 of them are stub.

IOS3 (rev 65280): Stub
IOS4 (rev 65280): Stub
IOS9 (rev 54321): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 54321): Trucha Bug
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
IOS17 (rev 1032): No Patches
IOS20 (rev 54321): Trucha Bug
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 54321): Trucha Bug
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 3072): Stub
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 54321): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 54321): Trucha Bug
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 54321): Trucha Bug
IOS80 (rev 54321): Trucha Bug
IOS90 (rev 54321): Trucha Bug
IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
MIOS v65535

Report generated on 2013/10/12.

I downgraded from SM 4.3U to 4.1U during my softmod, which may or may not matter.

Thanks alot!

 

[AbdallahTerro]

First you need to update your IOS with modmii for the sake of completion (51/52 and d2x)
Second use any HDD partition tool such as internal Windows tool or Aomi or Paragon to make sure the Fat32 is the First partition (sometimes tiny empty partitions are first) so if that's the case delete the first partition and make Fat32 at the start.
Third you can check my masterpack for a premade emunand those are tested and known to work (rename your nands and sneek folder to something else and copy mine)
Finally if all fails try another usb device some drives are not compatible

 

[jmsalal]

First you need to update your IOS with modmii for the sake of completion (51/52 and d2x)
Second use any HDD partition tool such as internal Windows tool or Aomi or Paragon to make sure the Fat32 is the First partition (sometimes tiny empty partitions are first) so if that's the case delete the first partition and make Fat32 at the start.
Third you can check my masterpack for a premade emunand those are tested and known to work (rename your nands and sneek folder to something else and copy mine)
Finally if all fails try another usb device some drives are not compatible

Thanks alot! Okay, to make sure I'm understanding correctly, what type of IOS updating should I do? Do you mean that I need to get rid of the stubs on IOS 51 and IOS 52 on the REAL nand and install d2x there? If that's the case, could I use Multi-Mod Manager and d2x installer? In the meantime, I'm gonna re-format my hdd to see if that helps. My SD card is 2GB, formatted to FAT32, but the largest sector size I can assign is 16k. Should that be ok?

 

[lokiseto]

I asked somewhere else, but anyway...
Do you guys know if theres a global option for all wiiware/VC games to automatically use neek2o?
Its really annoying to select the option individually.

 

[AbdallahTerro]

Thanks alot! Okay, to make sure I'm understanding correctly, what type of IOS updating should I do? Do you mean that I need to get rid of the stubs on IOS 51 and IOS 52 on the REAL nand and install d2x there? If that's the case, could I use Multi-Mod Manager and d2x installer? In the meantime, I'm gonna re-format my hdd to see if that helps. My SD card is 2GB, formatted to FAT32, but the largest sector size I can assign is 16k. Should that be ok?

you need non stub ios 51 and 52 and 245-251 need to be updated to d2x v10 instead of v8
As for the SD card sneek2o is still not up to date. So you need a usb hdd

I asked somewhere else, but anyway...
Do you guys know if theres a global option for all wiiware/VC games to automatically use neek2o?
Its really annoying to select the option individually.

If you use wiiflow I don't think so, you can make an official request in the main thread or using google code issues pages
You can try Postloader too, not sure if the neek2o is a global option there though

 

[jmsalal]

you need non stub ios 51 and 52 and 245-251 need to be updated to d2x v10 instead of v8
As for the SD card sneek2o is still not up to date. So you need a usb hdd


If you use wiiflow I don't think so, you can make an official request in the main thread or using google code issues pages
You can try Postloader too, not sure if the neek2o is a global option there though

Ok, should I just remove the stubbed IOS 51 and 52 and leave them empty, or is there something I should install there? Does Neek2o require d2x v10 in order to function as well? Thanks so much!

 

[AbdallahTerro]

don't remove any ios
Modmii can use your syscheck to update the wii, it will install the stubs and update d2x
Though I believe neek2o will work even if you don't update. but just for the sake of completion

 

[jmsalal]

don't remove any ios
Modmii can use your syscheck to update the wii, it will install the stubs and update d2x
Though I believe neek2o will work even if you don't update. but just for the sake of completion

Okay, gotcha! What do I need to tell Modmii to do? If it's a well-known process, which guide works best?

Just for understanding, we're talking about using Modmii on the Emunand and not the real nand, right?

 

[AbdallahTerro]

Modmii has several options when it comes to updating/softmoding
best thing to do is run modmii and make it prepare an SD for you will all the tools and IOSes based on your syscheck. this process will update the real wii IOSes
As for the emunand Modmii can build one from scratch
Anyways Modmii is so easy and straight forward
you can find the Modmii official thread in Wii hacking section in case you need more info.

 

[jmsalal]

Modmii has several options when it comes to updating/softmoding
best thing to do is run modmii and make it prepare an SD for you will all the tools and IOSes based on your syscheck. this process will update the real wii IOSes
As for the emunand Modmii can build one from scratch
Anyways Modmii is so easy and straight forward
you can find the Modmii official thread in Wii hacking section in case you need more info.

I'm actually having to put Neek2o on hold indefinitely. I got my Wiiware & VC to run in USB Loader GX and installed the incompatible games to my real nand. At this point, I don't want to risk damaging my Wii after it now does everything I need it to do. Thanks for all of your help and advice!

 

[hards]

hi i had to redo my computer system from scratch , anyway i got my 2tb hdd for this purpose but not done anything with it yet but allthough i have tried to sort this out , i would like to ask a question since i started useing this guide and i got so far into it is there any reason why a will console would format by it self , i know it sounds weird but that is what happened as i could not do anything on the wii console as my computer went down , i turned on the wii console today and it looks like it has been formatted as i had all the programs on including home brew etc , but no one else in apart from the dog and wife , and they would not touch it without me being there , we did have a power cut yesterday but why shoulld the wii format . thanks

 

[AbdallahTerro]

there is an option in wii settings last page to go back to factory or to "format wii system memory" this is sometimes useful in case of semi-bricks or to be able to erase saves and settings and what not.
P.S> I'm pretty sure it's not the dog

 

[hards]

thanks for your reply but the wii had all programs on the console and when i switched the console on it back to the start like it has been formatted but there is no one here that would have formatted the console so how did it get back to the start sequence of the console where it asks you to put in the date and time etc this is what i dont understand i know how to format the console but i did not format it some how it has done it its self how i dont know