Nice install man
Im going with my second and third lite now
Thank you, you are to kind, hope you solve all the problems.
Nice install man
Im going with my second and third lite now
But why do my solders doesn't stick to the capacitors?
Thank you for your information! Our spielking changed domain name to spielkingsmany resellers like txswitch have sx lite in stock now. spielking and elewelt also.
Shoutout to @ModderFokker619 got the job done on my switch lite and returned super fast! Thanks again man!
Pink is an error with the nand solder points. Use lots of flux and make sure the cable is connecting to both of the little pads it's next to on each solder point.So guys i faced an issue, install was good, showed it over to several guys, attached the chip, kept getting pink pink pink, although soldering was good.
decided to unsolder thr chip, console boots to ofw normally, attached a new chip, bam got a green light and boot.dat, was getting my phone to take a photo, console restarted and glitched to pink.
Turned it off and tried one more time, the chip has no power this time and boots to stock.
Decided to test the cap for continuity and it was ok
Tested the smaller cap below found a short.
removed the chip, and tested the console, powered on and got a weird hiss sound, automatically powered off, tested for shorts on caps, and both are shorted
here is the before and after, if anyone can assist with this weird thing, as i tend to have a habbit of weird stuff happening at the end each time, and havent succeded in a lite yet
--------------------- MERGED ---------------------------