Spent the whole day trying to fix this, and I'm beyond frustrated at this point, so I am asking for help lol. I'll try to explain every step clearly.
I recently had a Picofly chip installed in my patched V2 Switch. I received the Switch back yesterday and have been using the following guide to get a CFW running on my Switch: https://rentry.org/SwitchHackingIsEasy
Following this, I have been able to open Hekate. The first potential issue arose when backing up my Nand, and when creating a partition based EmuNand. I received an error that said "your emmc is initialized in slower mode". I wiped my card and started the process over again, and received the same error, but it did not stop me from proceeding so I continued the setup.
Once I completed the setup, I tried to launch atmosphere, and have been receiving the fatal error "unable to identify package 1 atmosphere"
I have verified my SD Card is legit, wiped the card and set it up again from scratch, ensured I was using the latest version of atmosphere and fusee. I think I am using the latest sig patches as well.
Can anybody help me finally get this CFW launched? Let me know if anymore info is needed.
I recently had a Picofly chip installed in my patched V2 Switch. I received the Switch back yesterday and have been using the following guide to get a CFW running on my Switch: https://rentry.org/SwitchHackingIsEasy
Following this, I have been able to open Hekate. The first potential issue arose when backing up my Nand, and when creating a partition based EmuNand. I received an error that said "your emmc is initialized in slower mode". I wiped my card and started the process over again, and received the same error, but it did not stop me from proceeding so I continued the setup.
Once I completed the setup, I tried to launch atmosphere, and have been receiving the fatal error "unable to identify package 1 atmosphere"
I have verified my SD Card is legit, wiped the card and set it up again from scratch, ensured I was using the latest version of atmosphere and fusee. I think I am using the latest sig patches as well.
Can anybody help me finally get this CFW launched? Let me know if anymore info is needed.
Attachments
Does the slower mode issue makes the Switch unusable? I don't think I can even boot into the normaI firmware either. I shipped this across the country to get modded, so if its a soldering issue I fear I will likely have to ship it back. Should I tell him to change the emmc to a different brand?
It can mean the emmc is dying, usually SK Hynix have this problem not commonly for Samsung emmc. You have to open it up and check if any components is damaged or anything is bridged.
I'm after Edizon Cheat codes for Metroid dread. I've found some and the title I'd matches but the build number is different, does this matter. The title ID is 010093801237C000 and the build number is 646761F643AFEBB3. Does the build number matter? Thanks in advance guys, any help and advice on this will be very much appreciated.
Last edited by TudorBlue,
better to ask this question in the below thread.
https://gbatemp.net/threads/cheat-codes-ams-and-sx-os-add-and-request.520293/
Another question. Is it possible I have a Nand issue that is causing these problems? I am unable to boot up the Switch in Sysnand and the OFW as well which is strange to. I simply get the Nintendo logo, then a black screen. At this point it practically feels bricked.
Is it possible that my boot 0 is corrupted, and fixing this could solve my problems? Should I be trying any specific unbricking guides, or do my specific issues not point to any of these fixes?
The problem point to the emmc module, it is a physical hardware problem if the emmc is dying.
after i did hack, i cant see stock, emumcc connecting with wifi, it lead me to banned?
how to use cheats? i have modded switch. and aio updater still dont have cheats for totk 1.1.1. how can i use this one?
https://github.com/bad1dea/NXCheats/tree/main/The Legend of Zelda Tears of the Kingdom
https://github.com/bad1dea/NXCheats/tree/main/The Legend of Zelda Tears of the Kingdom
So I'm wanting to overclock TotK mem to 1862mhz. I'm just about to do it but I noticed people saying that this isn't natively available in SYS CLK? The youtube video I originally watched that inspired me to give it a go was Modern Vintage Gamer. On his video it says "SYS CLK OC" overlay. How do I obtain this version? I can only find information for "Switch OC Suite". Is this the same thing? Any help would be greatly appreciated. I'm so close to playing this game and I would like to have the best possible experience of it. Cheers.
Can i use an hwfly without an emmc board?
i ducked up my emmc board trying to install a pikofly, so now the switch doesnt even turn on to rcm with it atached(maybe a short or something, im not trying any longer)
I can install the CPU flex very easily but i just cant seem to be able to do the other wires.
Can i just use a hwfly with hekate and use only an emuNand without a eMMC board attached?
(i have a v1 patched)
i ducked up my emmc board trying to install a pikofly, so now the switch doesnt even turn on to rcm with it atached(maybe a short or something, im not trying any longer)
I can install the CPU flex very easily but i just cant seem to be able to do the other wires.
Can i just use a hwfly with hekate and use only an emuNand without a eMMC board attached?
(i have a v1 patched)
-
DinohScene
That cat suit twink
-
-
-
-
@
TwoSpikedHands:
yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done -
@
TwoSpikedHands:
I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
-
@
TwoSpikedHands:
Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
-
@
Sicklyboy:
@TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one
-
@
Sicklyboy:
I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
-
@
TwoSpikedHands:
@Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
-
@
TwoSpikedHands:
I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
-
@
TwoSpikedHands:
I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
-
-
@
The Real Jdbye:
@TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway -
@
The Real Jdbye:
and realistically they wouldn't
be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves -
-
-
-
-
@
Karma177:
do y'all think having an sd card that has a write speed of 700kb/s is a bad idea?
trying to restore emunand rn but it's taking ages... (also when I finished the first time hekate decided to delete all my fucking files
) -
-
-
-
@
Karma177:
@The Real Jdbye it hasn't given me any error trying to write things on it so I don't really think it's faulty (pasted 40/50gb+ folders and no write errors)
-
-
@
DinohScene:
when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying
@
DinohScene:
when SD cards/microSD write speeds drop below a meg a sec, they're usually on the verge of dying