Hacking Screwed up bad, please help! vWII cIOS screw up!

The Real Jdbye

*is birb*
Member
Joined
Mar 17, 2010
Messages
23,392
Trophies
4
Location
Space
XP
14,027
Country
Norway
Please excuse me but im a major noob when it comes to command prompt/compiling files. I wouldn't even know how to use command prompt to convert these files. I thought the converter would be something simple :P can you walk me through it? Thanks! Also When i launch the exe file it opens command prompt and immediately closing it.
Shift+right click inside the folder with the boot.dol and the exe and "Open command window here" then type that in.
 
D

Deleted User

Guest
Was the error ticket -2011 or -1017

The problem with most IOS is that being unpatched, they can't disable ABHPROT or allow NAND access. Usually a 236, or other CIOS can do this. However nothing's currently vulnerable.

In any case, check your PM. It may not work most likely.
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
Shift+right click inside the folder with the boot.dol and the exe and "Open command window here" then type that in.
I get this error after converting the boot.dol into boot.elf. I dont think that converter is working as intended.


B2wenKM.jpg
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
It is very strange that i can't change my IOS's. All of my IOS's have been changed prior. Is there any way i can reset the wiiu's vwii and just start all over again?
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
Was the error ticket -2011 or -1017

The problem with most IOS is that being unpatched, they can't disable ABHPROT or allow NAND access. Usually a 236, or other CIOS can do this. However nothing's currently vulnerable.

In any case, check your PM. It may not work most likely.

yes those were the error codes i got :(
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
Was the error ticket -2011 or -1017

The problem with most IOS is that being unpatched, they can't disable ABHPROT or allow NAND access. Usually a 236, or other CIOS can do this. However nothing's currently vulnerable.

In any case, check your PM. It may not work most likely.

I believe 249 might be vulnerable but it hangs while trying to locate the WAD files.
 
D

Deleted User

Guest
I didn't expect that to work - those .DOL->ELF generally are for older GC stuff.

2011 is a signature check failure (non-exploitable or usable IOS)
The hanging most likely is due to the fact that 249 is using a base for a Wii and not vWii therefore any calls to it go to the wrong places in memory.

You could try 36 - but doubt it would work.

One other thought - go back to HackMii installer, and let it hang on the scam screen. On the SD should be a file that has a dump of the HackMii log. Perhaps post that here to see what is actually installed on the system.

Without a vulnerable IOS or CIOS you won't be able to install anything. Hopefully you can get it fixed or you may be sitting with a brick :(
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
I didn't expect that to work - those .DOL->ELF generally are for older GC stuff.

2011 is a signature check failure (non-exploitable or usable IOS)
The hanging most likely is due to the fact that 249 is using a base for a Wii and not vWii therefore any calls to it go to the wrong places in memory.

You could try 36 - but doubt it would work.

One other thought - go back to HackMii installer, and let it hang on the scam screen. On the SD should be a file that has a dump of the HackMii log. Perhaps post that here to see what is actually installed on the system.

Without a vulnerable IOS or CIOS you won't be able to install anything. Hopefully you can get it fixed or you may be sitting with a brick :(

i will give that a shot. I was reading this post and apparently this guy had a simmalar problem but he got his fixed with no explanation.

https://gbatemp.net/threads/and-now...to-an-earlier-situation-and-a-warning.357956/
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
I didn't expect that to work - those .DOL->ELF generally are for older GC stuff.

2011 is a signature check failure (non-exploitable or usable IOS)
The hanging most likely is due to the fact that 249 is using a base for a Wii and not vWii therefore any calls to it go to the wrong places in memory.

You could try 36 - but doubt it would work.

One other thought - go back to HackMii installer, and let it hang on the scam screen. On the SD should be a file that has a dump of the HackMii log. Perhaps post that here to see what is actually installed on the system.

Without a vulnerable IOS or CIOS you won't be able to install anything. Hopefully you can get it fixed or you may be sitting with a brick :(

So i ran the hackmii and let it hang on the screen but cant seem to find any dump file anywhere.
 
D

Deleted User

Guest
So i ran the hackmii and let it hang on the screen but cant seem to find any dump file anywhere.


Usually there's a log file in the root of the SD card, unless it barely made it anywhere (which is possible)

Usually called INSTALLER.LOG
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
fPGX2fr.jpg
1xNGmA0.jpg
I can Load Wii Mod 3.2 just fine and i guess it is getting me somewhere. Maybe someone can find this info useful?
 

stomp_442

New Member
Member
Joined
Jul 29, 2009
Messages
1,830
Trophies
1
XP
738
Country
United States
I think there are other methods to load homebrew besides using the exlpoit. There's casper and pussyloader, not sure if they work with the vWii though, those were released for Wii and might work with vWii.
 

Jeremy Pettes

Well-Known Member
OP
Newcomer
Joined
Mar 3, 2015
Messages
83
Trophies
0
Age
35
XP
99
Country
United States
I think there are other methods to load homebrew besides using the exlpoit. There's casper and pussyloader, not sure if they work with the vWii though, those were released for Wii and might work with vWii.

i was told that casper loader and pussyloader wont work on the vWII and not to touch them. Do you think its safe?
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    T @ Texasauras: IS ANYONE ON TWITCH.COM TWITCH.COM/THESUSHIDRAGON