Hacking Decrypt9 say my console is USA but I bought it in EUR

Oso · Jan 22, 2017

Rafa10 said:
Oso tu peux m'expliquer clairement en français stp mdr, je galère

Essaye ça :
If your console is PAL:

1. DO A NAND BACKUP OF YOUR CONSOLE AS-IS. It wont save you from this, but... If you mess it even more, you will be glad of having it.

2. Redownload the EUR O3DS 9.2.0 CTRTransfer and put it on a clean SD.

3. Do the CTRTransfer.

4. Reboot.

5. Change the secureinfo with Godmode9 (go to region changing on 3ds.guide for instructions) (or find somewhere a EUR Secureinfo_a file and inject it with Decrypt9)

Rafa10 · Jan 22, 2017

PAL C'est à dire?, je comprend pas bien ce qu'il faut faire

dotqurter_ · Jan 22, 2017

Has anyone tried to make a patch to where the firmware think the 2DS console already HAS the 3d Slider set to max? I mean, isn't it software that checks for the 3D slider being to the "ON" position? That wouldn't be too hard, as long as you're able to run ARM9 payloads from arm9loaderhax, right?

That'd fix A LOT of 2DS bricks.

EDIT: forgot they are inside of the 2.1.0FW, so they haven't dumped the OTP from their console yet ;-;. I mean, why can't they do what they did with the WiiU? AKA: "there isn't any bugs, so why not make some

?"

Rafa10 · Jan 22, 2017

dotqurter_ said:
Has anyone tried to make a patch to where the firmware think the 2DS console already HAS the 3d Slider set to max? I mean, isn't it software that checks for the 3D slider being to the "ON" position? That wouldn't be too hard, as long as you're able to run ARM9 payloads from arm9loaderhax, right?

Its another problem actually I think

dotqurter_ · Jan 22, 2017

Here's a few questions I'd like you to answer that may help:

Are you on a 2DS?
>If so, are you able to run A9LH/Already dumped OTP? Or are you stuck at your "Turn 3D Slider to the 'ON' position" setup in the 2.1.0ctr-transfer?

Rafa10 · Jan 22, 2017

I'm on a 2DS, I have a blackscreen on 9.2.0 EUR and i'll try on 2.1.0 EUR

dotqurter_ · Jan 22, 2017

Okay, tell me what happens when it finishes.

(I personally use my A9LH O3DS (hail 2k12 3ds's, I believe it's a launch day) with LumaCFW/Skeith, and haven't run into any issues yet.)

Infidel · Jan 22, 2017

Bu2d85 said:
2.1.0 will never work if you are using Luma3DS. It is not able to boot the 2.1 NAND.

--------------------- MERGED ---------------------------

I think we are troubleshooting the wrong thing.

Everyone is hung up on regions but you said the original fault was a "format brick". How do you format brick an O3DS? It has a 3D slider.

You bought the console new, you modified it and ran homebrew/CFW and then you bricked it? We need to go back and fix the original brick.

We need more details from you.

It's a 2ds which doesn't have a 3d slider.

Rafa10 · Jan 22, 2017

Black screen again for 2.1.0 EUR, I try 2.1.0 USA with region changing and if it don't work I think I'll give up

osaka35 · Jan 22, 2017

so you bought a 2ds in europe that has a north american seriel code? could have been a shell swap, though i do not know why that would have happened.

--------------------- MERGED ---------------------------

Rafa10 said:
Black screen again for 2.1.0 EUR, I try 2.1.0 USA with region changing and if it don't work I think I'll give up

do not give up yet. there may be info we are missing, or things we haven't tried

we will figure this out!

dotqurter_ · Jan 22, 2017

@Rafa10, have you successfully made it to the "3D Slider" page anywhere in your modding time?

Rafa10 · Jan 22, 2017

Yes, it's been a month I try to debrick because I didn't a backup NAND, I'm tired xD
Well I had the 3ds slide issue when I was in 2.1.0 USA

yacepi15 · Jan 22, 2017

@Rafa10 , if you had a format brick, with the CTRNAND Transfer, everything related to that is replaced. That's not the problem.
Please, try this:

1. Enter D9.
2. SysNAND options.
3. CTRNAND Transfer.
4. Autofix CTRNAND.
5. Reboot!

PS: Secureinfo_A / Other files must be of your resulting region.

dotqurter_ · Jan 22, 2017

Okay, so that shows the 2DS Format Softbrick. Any chance you could revert every change you can remember and get back to that screen and have a 3DS game readily available?

Rafa10 · Jan 22, 2017

yacepi15 said:
@Rafa10 , if you had a format brick, with the CTRNAND Transfer, everything related to that is replaced. That's not the problem.
Please, try this:

1. Enter D9.
2. SysNAND options.
3. CTRNAND Transfer.
4. Autofix CTRNAND.
5. Reboot!

I've did this like 30 times in a row

dotqurter_ · Jan 22, 2017

yacepi15 said:
@Rafa10 , if you had a format brick, with the CTRNAND Transfer, everything related to that is replaced. That's not the problem.
Please, try this:

1. Enter D9.
2. SysNAND options.
3. CTRNAND Transfer.
4. Autofix CTRNAND.
5. Reboot!

PS: Secureinfo_A / Other files must be of your resulting region.

I believe that he already stated that it failed to work.

yacepi15 · Jan 22, 2017

Rafa10 said:
I've did this like 30 times in a row

The "autofix CTRNAND" thing?

Rafa10 · Jan 22, 2017

yacepi15 said:
The "autofix CTRNAND" thing?

Sorry I've red bad, no never
On what ctr I need to be and what region too

yacepi15 · Jan 22, 2017

Rafa10 said:
Sorry I've red bad, no never
On what ctr I need to be and what region too

CTR 9.2 EUR OLD3DS.
Secureinfo_A EUR (02 string)

Good luck.

Rafa10 · Jan 22, 2017

Okay I'll try now, USA 2.1.0 not working, blackscreen

Hacking Decrypt9 say my console is USA but I bought it in EUR

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Instructional Designer

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum