When I load up wii games for the first time on wiiflow, I cant save them because the game says "the file cannot be used because the data is corrupted." Does anyone know how to fix this. I put the savepath line in the wiiflow.ini and this still happens.
Strange thing. When i load wiiflow from real nand and sets on VC/WW game Neek2o mode "ON", game works. But, after exiting back to Wiiflow in Neek2o mode, i can't run any WW/VC game, even the same, which i choosed before - resetting back to list (setting neek2o mode in game does not change anything).
what is wrong?
in neek2o mode system menu, all games works fine
fresh emunand i used from masterpack, everything else i made by this manual (installing games, copying folders...)
Strange thing. When i load wiiflow from real nand and sets on VC/WW game Neek2o mode "ON", game works. But, after exiting back to Wiiflow in Neek2o mode, i can't run any WW/VC game, even the same, which i choosed before - resetting back to list (setting neek2o mode in game does not change anything).
what is wrong?
in neek2o mode system menu, all games works fine
fresh emunand i used from masterpack, everything else i made by this manual (installing games, copying folders...)
Is there any way to automaticly return to system menu (real nand) after playing WiiWare game in neek2o mode? Like in USBLoaderGX. Neek2o is great for WiiWare games, but for other things is useless.
There are just a few games that need the neek2o - an other option you have is, you could install those few wads on your system menu (real nand). So when you return from there you are back to system menu.
Just be aware there are some WiiWare wads that don't work 100% - ether they freeze or you just can't access them. I remeber a couple games, a game with Gladiator... and an other one with ...Bonsai in the title. They didn't work nowhere! Not in neek2o and not on real nand's system menu. And "Evasive Space" (WW) worked fine until you tried to exit the game, then it allways froze...
I miss something, but i can't run anything from emunand. Tried all 3 loaders, and result is same - reset (return to loader)
But neek2o works fine. Just i don't like that thing - staying in neek2o mode in wiiflow, after playing wiiware game
Is there any way to automaticly return to system menu (real nand) after playing WiiWare game in neek2o mode? Like in USBLoaderGX. Neek2o is great for WiiWare games, but for other things is useless.
Nice. I set [return to Back 2 Nand] channel and works fine. But, how i understood, there is no way, to set [return to] for emu nand and for everything others seperately (for everything other i use wiiflow channel)
Nice. I set [return to Back 2 Nand] channel and works fine. But, how i understood, there is no way, to set [return to] for emu nand and for everything others seperately (for everything other i use wiiflow channel)
USBLoader GX let me to return automaticly to system nand, after lauching WiiWare game in neek2o. So, right now i use USBLoader GX for neek2o emunand games :-)
MAJOR THANKS TO YOU AbdallahTerro for this awesome tutorial and the premade emunand !!
I was wondering if you could help me out... I followed your guidelines but Castlevania Rebirth still goes to a black screen and doesn't boot... I tried to use the Wiiflow boot feature ''Launch with Neek2o'' but to no avail...
Is there anybody here that would be kind enough to help me out with this ? I'm really stuck on this one. Would it help if I provided some kind of system readout such as the Wiiflow.ini or something ?
What am I doing wrong ? I have tried a few other games and they all boot great with the cIOS 248...
I'm probably not a good help anymore since it's been long ago that i was messing with Wiiflow. But well, the least i can do, is to try
- Do other games which require the activated "Launch with Neek2o" work?
- Have you tried to also change various "video modes" (I think it was), like "NTSC/PAL50/PAL60 etc" something like that.
(Choose a game, then choose settings icon (the same place you activated "Launche with Neek2o")
The last option would be to just install those couple games that require the "neek2o" to launch - in the normal Start Screen Menu (the screen when you start up your Wii).
I'm probably not a good help anymore since it's been long ago that i was messing with Wiiflow. But well, the least i can do, is to try
- Do other games which require the activated "Launch with Neek2o" work?
- Have you tried to also change various "video modes" (I think it was), like "NTSC/PAL50/PAL60 etc" something like that.
(Choose a game, then choose settings icon (the same place you activated "Launche with Neek2o")
The last option would be to just install those couple games that require the "neek2o" to launch - in the normal Start Screen Menu (the screen when you start up your Wii).
EmuNand and Neek2o Made Easy A Super Noob Friendly Guide
The Following info is for the real Wii and NOT for WiiU/vWii The Emunands made this way can also be used by other USB loaders such as USBL-GX, CFG and Postloader
Hello,
After doing lots of testing I thought I should share this info:
Why do I need Neek?
Nand mode in Wiiflow allows users to launch their favorite Wiiware/VC games installed on their Real Nand or on an EmuNand (on SD or USB)
Since the Wii has such a tiny internal memory 512MB, install WW on the real nand and you'll be faced by lack of nand space very soon, copying or moving WW/VC channels to SD is always an option but again free space issues will arise when using SDs with small capacities like 2GB or less. So you wish you can move them to USB HDD but that's not a straight forward option.
That's where Neek comes into the picture (thanks to Crediar) and offers the following features:
1. Store your games on SD or USB
2. Store as many as you wish as long as you have free space
3. Play out of region games
4. Use cheats
5. Play games on different Wii
6. Test themes and custom channels
7. Play GC and Triiforce games in addition to Wii games and WW/VC
etc... etc...
What's Neek2o?
Neek2o is a mod of Neek by obcd and overjoy that added many features and allowed customization and ability to use neek off USB device with no SD inserted.
Can I use Neek2o in Wiiflow?
Wiiflow-mod by Fix94 & co uses Neek2o to launch WW/VC in addition to old triforce cIOS bases technique this requires a recent rev of Wiiflow (v4.0 is coming soon) and neek2o rev90+ (latest is 93)
Is Neek2o mode really needed? I can use the regular mode just fine!
in 90+% of the time you'll be fine but some games really need this to work (castlevania rebirth, rubik's rush, swords and soldires, target toss pro bags, Zelda majora's mask....)
So, how can I setup neek2o? 1. build a uneek+di nand using ModMii use rev95
A. Open Modmii and type "S" for Sneek installation
B. Type "3" for All of the above
C. Select 95 i.e. type "1"
D. Uneek+DI i.e. type "UD"
E. Default Settings i.e. type "D"
F. Again Default Settings i.e. type "D" a second time
G. Select your region type U, E, J, or K
H. type 4.3
I. Postloader channel - type "Y" (this is optional)
J. cIOS 249 type "N" - Not needed
K. NMM - No type "N"
L. Priiloader - No not needed - type "N"
M. For serial number you can either type "D" for default or type the one fond on your Wii console
N. Theme is optional- you can type "N" for default boring theme
O. Ninty's Channels are also optional - You can type "N"
P. You have reached the final screen - now if you want to installs WAD files like forwarder channels, Wiiware or VC games copy the wads to \ModMii\Temp\WAD folder before making the nand. I recommend installing Wiiflow v14b forwarder, Wiiflow Loader Hidden Channel v2 and any WiiWare/VC games you want to play
Q. Finally type"Y" for Yes do it now!
Tip: If you made the emunand without installing the wads you can add the wads later to the emu nand using ModMii or ShowMiiwads.
To do so open showmiiwads
and select the nand backup path under options:
then open the folder containing your WADS i.e. forwarders and WW games
Right click the ones you wanna copy to the emunand and select "extract to nand"
You can select nand view to check the installed channels in case you want to delete games (via right click also)
2. Copy the content of "Copy_to_SD" and "Copy_to_USB" folders to your SD and USB accordingly (You need to format the USB device to FAT32 32k cluster size first) "nands" folder and "sneek" folder that need to be placed on USB device root 3. Install official neek2o channel to your real Wii using a wad manager, to test the Emunand from system menu neek2o channel directly: get it from here http://code.google.c.../downloads/list
Tip:To update to latest Neek2o, here's my Legal WiiFlow Masterpiece Mini Pack for you, contains WiiFlow r844mod, uNeek2o 95b4, some extras and forwarder channels:
http://www.mediafire.com/download.php?d8awqotivpws6qm
*apps folder goes into root of SD or USB
*Sneek folder into USB root (I included some extras and custom titles file too)
*Wads are meant to be installed to both real and emunand: I included my Clouds channels and neek2o channel (real nand) and back to real nand (emunand) and wiiflowloader hidden channel (install on both real and Emunand)
4. First time you'll need to setup your nand and sync the wiimotes Tip: if you get your wiimotes not synched in Emunand then open Neek2o Channel sync your wiimotes or just copy Sysconf from real nand "shared2\sys" folder to "\nands\pl_xx\shared2\sys\" Tip: try to use same region & SM revision as your real nand and copy \shared2\ folder to the nands\pl_xx\ folder to skip step 4 (this also gets Network connection working on Emunand too)
folder using WiiXplorer rev235+ or extract sysconf file using third party apps such as Postloader4 Tip: It is recommended to copy "cert.sys" file from your extracted nand dump "sys" folder to neek2o nand "\nands\pl_xx\sys" folder. Because when this file is absent you can get an error messages telling you that "System Files are Corrupted" or something like that when trying to launch a game using WiiFlow
The following screenies will show you how to copy your cert.sys file and "shared2" folder to the emunand(This will skip the first boot setup and wiimote sync issues)
Grab Wiixplorer rev 241 from here: http://www.mediafire.com/?03lbcg9gosobsmd
extract this rar file to SD or USB root
Open the Homebrew Channel and load Wiixplorer
Go to Nand
Go to "Sys" folder and press "+" on cert.sys file, then select "copy"
Goto USB1 (or whatever partition you are using as Fat32) and go to you nands\plxxx\sys folder
click "+" then select "paste"
Now repeat the same steps for your "Shared2" folder, i.e. copy folder from nand to usb\nands\plxxx folder
5. If the Neek2o- Emunand works fine you're ready to add more games using showmiiwads if you like Congrats you have a working neek2o nand with all your games
Tip: When everything works fine, backup \sneek\nandcfg.bin and \nands\pl_xx\title\00000001\00000002\data\settings.txt. You might need them to repair trouble later Tip: you can also use a PC to set these 2 files to "read only" using file property or attrib command, this might prevent corruption Tip: you can create as many nands as you want but one is really enough Tip: I also recommend backing up both "Nands" and "sneek" folders to PC, this will be very useful when problems happen.
Then what? I want to use Wiiflow-mod to play my games.
Tip: open wiiflow.ini and edit the path to your emunand as follows You'll find this under [Nand]
path=/nands/pl_xx (replace xx by the letters you have)
Open Wiiflow-mod or Wiiflow 4 and go to nand/channels mode, select emunand from source menu or press "B" on the mode button (once or twice)
Your games should appears and now you can download the covers and preview the banners
Start any game using default settings
If you face an issue with default launch mode, try "neek2o" launch option on last game settings page
Some titles will just blackscreen since they belong to different region, there's nothing you can do here except get the game from your region or wait for a neek2o or apploader update
When I exit the game I'm back to SM on neek2o nand!?
This can happen and should be fixed was finally fixed in neek2o rev93
Tip: if you have this issue update Wiiflow to rev4.0.2 beta 712+ and neek2o to rev 93+
Can I start WF in neek2o mode and play all WW/VC from there?
sure you need v14b forwarder (here) and Wiiflow-Loader hidden channel v2 to be installed on your Emunand
Start WF from neek2o or by using Exit to Neek2o option in real mode Tip: disable neek2o option in neek2o mode before launching any wiiware no more needed Tip: When you exit to neek2o, Wiiflow will run from USB\apps\wiiflow\boot.dol if present and if not there it will run SD\apps\Wiiflow\boot.dol
While when you run the official forwarder channel SD path is checked first.
Hence advanced users can use this to run two different wiiflow revisions (one on SD and one on USB) but I recommend just having Wiiflow in one location only
Update on how things work: Using Wiiflow rev 712+ and neek2o rev93+
1. Start Wiiflow from real nand > Start any Wiiware in normal mode > Exit game > back to Wiiflow on real nand
2. Start Wiiflow from real nand > Start any Wiiware in neek2o mode > Exit game > back to Wiiflow on neek2o nand
3. Start Wiiflow from Neek2o nand > Start any Wiiware in any mode > Exit game > back to Wiiflow on neek2o nand
4. To go back to real nand select "Exit to real nand" from Wiiflow exit menu Tip: you can use all modes in Wiiflow running in neek2o mode Tip: To make GameCube mode appear in neek2o mode edit [DML] section in wiiflow.ini and make this tiny change : "always_show_button=yes"
Tip: only limitation is that Wii wbfs games won't load from NTFS partition
(but hopefully this will change in the future when support for all partition types will be added - thanks to OverjoY's hard work)
Thank you for your reply.
The NAND I'm trying to emulate was created by ModMii and I re-created it multiple times with no luck.
My USB is formatted as FAT32 with 32KB allocation size.
What do you mean with MBR? (I know what it means but what does it have to do with this?)
Thank you for your reply.
The NAND I'm trying to emulate was created by ModMii and I re-created it multiple times with no luck.
My USB is formatted as FAT32 with 32KB allocation size.
What do you mean with MBR? (I know what it means but what does it have to do with this?)
It has to do with the fact that emulated NAND on cIOS only works with MBR partition table type and FAT32. Also note that emuNAND and NEEK are not the same thing. both of them require MBR/FAT32, though, and probably won't work with a flash drive.
It has to do with the fact that emulated NAND on cIOS only works with MBR partition table type and FAT32. Also note that emuNAND and NEEK are not the same thing. both of them require MBR/FAT32, though, and probably won't work with a flash drive.
It has to do with the fact that emulated NAND on cIOS only works with MBR partition table type and FAT32. Also note that emuNAND and NEEK are not the same thing. both of them require MBR/FAT32, though, and probably won't work with a flash drive.
I know this thread is a few months old but id like to add that I'm having the same issue. I have my emunand on a fat32 32k sd card MBR 1 single partition. I got sneek files using modmii and made a emunand using showminand (I believe that's what its called) ive tried this and would love to be able to play my wiiware titles through wiiflow I am able to see the covers but when I click them they all black screen and then return to the wiiflow source menu. I know im doing something wrong because none of the standard nand channels like homebrew or the wii shop channel will play through it either although I have no issues playing wii gamecube or emulators through wiiflow such as nes snes wii64 etc any help would be greatly appreciated. Thanks in advance
Same problem, stuck on Reloading bootmi IOS!
My HDD is FAT32 with 32k clusters and MBR partition type.
My SD card is 32 GB SDHC FAT32 32k clusters.
I've spent almost an entire night trying to fix it. I've read every forum post from users with the same issue. Still no luck. Here's what I've tried:
(1) Using ModMii to generate the NAND files for v95 and v96 separately. Both do the same thing.
(2) Renaming 'bootmiineek' to 'bootmii'
(3) Copying bootmii to root of USB and SD
(4) Using premade NAND from links found around here
(5) Ensuring that bootmii is installed in slot 254 and not as stub from SysCheckHDE
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
Another video game prototype has been found and preserved, and this time, it's none other than the game that spawned an entire franchise beloved by many, the very...
Anbernic is back with yet another retro handheld device. The upcoming RG28XX is another console sporting the quad-core H700 chip of the company's recent RG35XX 2024...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
Today, April 8th, 2024, at 4PM PT, marks the day in which Nintendo permanently ends support for both the 3DS and the Wii U online services, which include co-op play...
Nintendo might just as well be a law firm more than a videogame company at this point in time, since they have yet again issued their now almost trademarked usual...
With Apple having recently updated their guidelines for the App Store, iOS users have been left to speculate on specific wording and whether retro emulators as we...
The time has finally come, and after many, many years (if not decades) of Apple users having to side load emulator apps into their iOS devices through unofficial...
A new Nintendo Switch firmware update is here. System software version 18.0.1 has been released. This update offers the typical stability features as all other...
TheFlow has done it again--a new kernel exploit has been released for PlayStation 4 consoles. This latest exploit is called PPPwn, and works on PlayStation 4 systems...
Two classic titles join the Nintendo Switch Online Expansion Pack game lineup. Available starting April 24th will be the motorcycle racing game Extreme G and another...
Nintendo has recently announced through their social media accounts that a new Indie World stream will be airing tomorrow, scheduled for April 17th, 2024 at 7 a.m. PT...
In 2017, the United States Federal Communications Commission (FCC) repealed net neutrality. At the time, it was a major controversy between internet service providers...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
I feel like school, back when I was actually in school, was more entertaining though, because of how much I get to interact with people, hang out with friends, and other stuff like that. All I get to talk to at work is my boring coworkers lol