Hacking WiiFlow-Mod and Emunand

[abdezca]

Hi guys,

I already have the wiiflow on an old wii with a working neek2o.

A couple of weeks ago, I got a used Wii from ebay, and I decided to do some homebrew on it. I decided to use the mastermod like I did on my previous wii to hack the new one, but im running into a constant problem with sneek.

I use the existing emunand provided on the pack to load my vc games, but when I lunch the games in neek2o mode i just get a black screen on Wiiflow. However if i access sneek from real nand using a channel i can play the games.

Can someone tell me if there is anything im missing? I did set up the right path and also did the shared2 copy folder with the cert sys...

any help greatly appreciated

 

[AbdallahTerro]

might be due to cIOS used in startup settings
try to set it to 249 (make sure d2xbeta 52 is installed)
if it doesn't help switch wiiflow from 1076mod to 1054 mastermod

 

[abdezca]

might be due to cIOS used in startup settings
try to set it to 249 (make sure d2xbeta 52 is installed)
if it doesn't help switch wiiflow from 1076mod to 1054 mastermod

Hmmm... I installed the d2xbeta 52 that comes on the wad folder on the mastermod. The mod that is on Wiiflow is the 1054. I still get the error... is there anything else that i can post so you can see my problem?

Thanks

 

[AbdallahTerro]

did you change cIOS is wiiflow startup settings?
a syscheck would help too

 

[abdezca]

did you change cIOS is wiiflow startup settings?
a syscheck would help too

SysCheck v2.3.1 HacksDen Edition by JoostinOnline Double_A R2-D2199 and Nano
...runs on vIOS58 (rev 6176).
Region: NTSC-U
System Menu 4.3U (v513)
Drive date: 05.26.2006
Homebrew Channel 1.1.2 running on IOS58
Hollywood v0x11
Console ID: 35705918
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 105 titles.
Found 55 IOS on this console. 5 of them are stub.
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug NAND Access
IOS80 (rev 16174): Trucha Bug NAND Access
IOS202[60] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS222[38] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access
IOS223[38+37] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access
IOS224[57] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS236[36] (rev 65535 Info: rev 3351): Trucha Bug ES Identify NAND Access
IOS245[37] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS246[38] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug ES Identify NAND Access
IOS247[53] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS248[55] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS249[56] (rev 21010 Info: d2x-v10beta52): Trucha Bug NAND Access USB 2.0
IOS250[57] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS251[58] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS252[56] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65280): Stub
BC v6
MIOS v10
Report generated on 02/03/2016.


hope it helps

Yeah i force it on start up setting and also when launching the game. and still get the same result.

 

[AbdallahTerro]

SysCheck v2.3.1 HacksDen Edition by JoostinOnline Double_A R2-D2199 and Nano
...runs on vIOS58 (rev 6176).
Region: NTSC-U
System Menu 4.3U (v513)
Drive date: 05.26.2006
Homebrew Channel 1.1.2 running on IOS58
Hollywood v0x11
Console ID: 35705918
Console Type: Wii
Shop Channel Country: United States (49)
Boot2 v4
Found 105 titles.
Found 55 IOS on this console. 5 of them are stub.
IOS4 (rev 65280): Stub
IOS9 (rev 1034): No Patches
IOS10 (rev 768): Stub
IOS11 (rev 16174): Trucha Bug NAND Access
IOS12 (rev 526): No Patches
IOS13 (rev 1032): No Patches
IOS14 (rev 1032): No Patches
IOS15 (rev 1032): No Patches
IOS16 (rev 512): Stub
IOS17 (rev 1032): No Patches
IOS20 (rev 16174): Trucha Bug NAND Access
IOS21 (rev 1039): No Patches
IOS22 (rev 1294): No Patches
IOS28 (rev 1807): No Patches
IOS30 (rev 16174): Trucha Bug NAND Access
IOS31 (rev 3608): No Patches
IOS33 (rev 3608): No Patches
IOS34 (rev 3608): No Patches
IOS35 (rev 3608): No Patches
IOS36 (rev 3608): No Patches
IOS37 (rev 5663): No Patches
IOS38 (rev 4124): No Patches
IOS40 (rev 16174): Trucha Bug NAND Access
IOS41 (rev 3607): No Patches
IOS43 (rev 3607): No Patches
IOS45 (rev 3607): No Patches
IOS46 (rev 3607): No Patches
IOS48 (rev 4124): No Patches
IOS50 (rev 16174): Trucha Bug NAND Access
IOS51 (rev 4864): Stub
IOS52 (rev 16174): Trucha Bug NAND Access
IOS53 (rev 5663): No Patches
IOS55 (rev 5663): No Patches
IOS56 (rev 5662): No Patches
IOS57 (rev 5919): No Patches
IOS58 (rev 6176): USB 2.0
IOS60 (rev 16174): Trucha Bug NAND Access
IOS61 (rev 5662): No Patches
IOS62 (rev 6430): No Patches
IOS70 (rev 16174): Trucha Bug NAND Access
IOS80 (rev 16174): Trucha Bug NAND Access
IOS202[60] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS222[38] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access
IOS223[38+37] (rev 4 Info: hermes-v4): Trucha Bug ES Identify NAND Access
IOS224[57] (rev 65535 Info: hermesrodries-v6): Trucha Bug NAND Access USB 2.0
IOS236[36] (rev 65535 Info: rev 3351): Trucha Bug ES Identify NAND Access
IOS245[37] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS246[38] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug ES Identify NAND Access
IOS247[53] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS248[55] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS249[56] (rev 21010 Info: d2x-v10beta52): Trucha Bug NAND Access USB 2.0
IOS250[57] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS251[58] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS252[56] (rev 21010 Info: d2x-v10beta53-alt): Trucha Bug NAND Access USB 2.0
IOS254 (rev 65280): Stub
BC v6
MIOS v10
Report generated on 02/03/2016.


hope it helps

Yeah i force it on start up setting and also when launching the game. and still get the same result.

looks ok!
only thing left to do is to delete neek2o cache from /sneek folder and try another neek2o revision

 

[abdezca]

looks ok!
only thing left to do is to delete neek2o cache from /sneek folder and try another neek2o revision

Well I already tried every suggestion, I did use the wiiflow 1076 also sneek 7.2 and also the newest one 9.6 and the same error persists all i get is a black screen, but when I use the nswitch the games works. Im assuming there is something wrong with the paths.

 

[AbdallahTerro]

yeah and maybe backup/delete wiiflow save channel, wiiflow ini and settings files and try with clean setup

 

[SuperMew98]

This is the most user-friendly guide to NEEK2O I have ever seen!

Outstanding job, Abz!

 

[Haloman800]

Today I dumped my NAND using WiiFlow... and I have no idea why, but it deleted EVERYTHING in my WiiFlow folder.. All of the work I've been doing over the past month.

Thank God that I made a backup the other day, so I can restore it.

 

[AbdallahTerro]

Today I dumped my NAND using WiiFlow... and I have no idea why, but it deleted EVERYTHING in my WiiFlow folder.. All of the work I've been doing over the past month.

Thank God that I made a backup the other day, so I can restore it.

I never recommend dumping your own nand
Just follow the guide and use the premade emunands in the pack to add your games fast, easy and safe

 

[Haloman800]

I never recommend dumping your own nand
Just follow the guide and use the premade emunands in the pack to add your games fast, easy and safe

Will do. I'm using your premade nand now.

question: do I need an SD card? Right now I have everything on the USB, would that work for these files too?

 

[Haloman800]

Could someone share their WiiFlow.ini ? I'm having difficulty setting up neek2o and I think it's related to my WiiFlow.ini not being configured properly.

 

[AbdallahTerro]

Will do. I'm using your premade nand now.

question: do I need an SD card? Right now I have everything on the USB, would that work for these files too?

USB only

 

[modbrain]

Good Morning Gentelman

The tutorial on the first post, is it still "up-to-date" ?

I have a big SD cart, allready set up GX-loader for GameCube Games, CFG-loader for Wii Games - and now i try to set up Wiiflow-loader for Wiiware, VC & Emulators.

Thanks in advance.

 

[modbrain]

Maybe someone can help me to understand it.

Do i see it correctly:

When i install and set it up like it´s writen on the first page, will i be able to load up Wiiflow through a forwarder channel on the Wii System Menu in normal Nand? Or do i first have to click on a neek2o-icon on the Wii System Menu - wait until neek2o loads the full emunand Wii system menu and from there i have to load up the Wiiflow forwarder channel to choose a game in wiiflow?

.........

I have a 256 GB SD card (FAT32) and a small 16 GB USB Thumb (i bought it because Wiiflow loads up very slow if there is no USB device conected).

I use

- USB Loader GX for Gamecube Games
- CFG Loader for Wii Games

Now i´m planing to setup the Wiiflow (+EmuNand / Neek2o Mod) for

- Wiiware
- VC





.

 

[modbrain]

Hello

I did everything told on the first site:

1. build a uneek+di nand using ModMii use rev95

A. Open Modmii and type "S" for Sneek installation done
B. Type "3" for All of the above done
C. Select 95 i.e. type "1" - on number 1 there is "96" - so i type 2 for "95"
D. Uneek+DI i.e. type "UD" done
E. Default Settings i.e. type "D" done
F. Again Default Settings i.e. type "D" a second time done
G. Select your region type U, E, J, or K done
H. type 4.3 done
I. Postloader channel - type "Y" (this is optional) done
J. cIOS 249 type "N" - Not needed done
K. NMM - No type "N" done
L. Priiloader - No not needed - type "N" done
M. For serial number you can either type "D" for default or type the one fond on your Wii console done
N. Theme is optional- you can type "N" for default boring theme done
O. Ninty's Channels are also optional - You can type "N" done
P. You have reached the final screen - now if you want to installs WAD files like forwarder channels, Wiiware or VC games copy the wads to \ModMii\Temp\WAD folder i put "Blue Circles-FX94v14b-DWFA.wad" + "WiiFlowLoaderChannel v2 - WIIH.wad" into the temp/WAD folder - (i also tried it with no .wad files at all and i still get this error message)

Now i click on Y = Yes, do it now! .....and all i get is this error message:

Building UNEEK+DI neek2o rev95
neek2o Enabled (can be changed in options)
SNEEK and SNEEK+DI SD Access Disabled (can be changed in options)
Downloading UnRAR
Downloading Official Sneek Installer (v0.7a)

The Command "temp/unrar.exe is wrongly spelled or could not be found.

WARNING:
Some files Required for the neek2o install are missing.
Aborting neek2o Installation, check your internet connection
Then repeat the Installation to try again.

Press any key to return to the Main Menu.

I´m using ModMii v6.4.1 - is this the problem ?

 

[DamnStorm]

Hello

I did everything told on the first site:

1. build a uneek+di nand using ModMii use rev95



Now i click on Y = Yes, do it now! .....and all i get is this error message:




I´m using ModMii v6.4.1 - is this the problem ?

Go to this link: http://www.rarlab.com/rar_add.htm and download the UnRAR for windows. Then put it in the temp folder in the ModMii folder and it should work.

 

[DamnStorm]

So I added more games to my USB and according to this neek2o guide ( http://www.digital-kaos.co.uk/forums/showthread.php/241036-Neek2o-Setup-and-installation-guide ), it says to delete the diconfig file from the SNEEK folder when adding more games and so I did. So I plug in my usb and start the neek2o channel and nswitch says it failed to mount usb. Can anyone help me?

EDIT: Problem Solved! All I had to do was to switch the usb to the other usb port on the wii.

 

[modbrain]

@DamnStore

Thank you. I reserched it some more and found the same solution. But the info on the first site of this thread is kinda old, i found out, you can take a pre-made emunand from the "WiiFlow 4 The Masterpiece Pack by Abz"

It makes the hole thing easier. Thanks for responding