Hacking 3DS NOOB PARADISE - Ask questions here

[kon315]

Welcome, a few days ago I install arm9loaderhax using this guide: https://github.com/Plailect/Guide/wiki. Everything goes fine but now I would like to return to official software (9.2.0-20 or 2.1.0-4 which I have on the beginning). Of course I make backups every time when it was written in guide above. My question is:
Can I use DEcrypt9WIP and one of my backups of sysNAND to return to soft 9.2.0-20 or 2.1.0-4 and booting console without sd card (now is needed)? If no so how I can return to earlier state/soft of console without bricking it?

 

[GuyLuigi]

Hi, I've formated my Emunand's SD and my Nintendo 3DS many times and now my old emunand's save files are corrupted, can I fix it with some program, CIA or something?

I keep only the old 00000001.sav files and some backups created by console configuration section (from Emunand, of course)

 

[Arubaro]

Hi, I've formated my Emunand's SD and my Nintendo 3DS many times and now my old emunand's save files are corrupted, can I fix it with some program, CIA or something?

I keep only the old 00000001.sav files and some backups created by console configuration section (from Emunand, of course)

AFAIK, there is no other way to achieve that that reinjecting in your emunand an emunand dump from when you backed your saves, install your game and import your save through system settings and use JKSM or similar to make a new backup.

Then use that same app to import your save whenever you want

 

[Quantumcat]

Welcome, a few days ago I install arm9loaderhax using this guide: https://github.com/Plailect/Guide/wiki. Everything goes fine but now I would like to return to official software (9.2.0-20 or 2.1.0-4 which I have on the beginning). Of course I make backups every time when it was written in guide above. My question is:
Can I use DEcrypt9WIP and one of my backups of sysNAND to return to soft 9.2.0-20 or 2.1.0-4 and booting console without sd card (now is needed)? If no so how I can return to earlier state/soft of console without bricking it?

Why would you want to? There is zero that you can do in 9.2 that you can't do in a9lh 11.0 and in 2.1 all you can do extra is dump OTP which you already have. And a9lh 11.0 you can do way, way more. If you want to go back to 9.2 and keep a9lh, restore a NAND backup from 9.2 using Hourglass9 so as to not lose a9lh. You cannot boot 2.1 with CFW so to boot that you can restore a backup with Decrypt9 and choose to NOT keep a9lh. Or you can restore 9.2 without a9lh and go through the whole downgrade process again. But doing any of these is either dangerous, will reduce what you can do with your console, or both.

 

[TwilightWarrior]

I'm on step 32 of https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)


I loaded up FBI but I can't find anywhere that says sysUpdater.cia?

 

[Cava]

never mind.

 

[Deleted User]

How do you view CIA banners in Ohana3DS?

 

[Swiftloke]

How do you view CIA banners in Ohana3DS?

No, I mean we literally have a whole section of the forum specialized and dedicated to questions.

 

[Deleted User]

Ah. I'll ask there now.

 

[jucaa]

Make sure your fbi is updated to latest version. 2.3.3 Then from fbi menu, select "Titles" Then find your game then "Delete Secure Value"

Didnt work, the same as last time, i can import the save, but when i load the game there is not a save file.

 

[Sonic Angel Knight]

May i ask what the name of the file is?

 

[jucaa]

I'm on step 32 of https://github.com/Plailect/Guide/wiki/9.2.0-Update-(rxTools-2.5.2)


I loaded up FBI but I can't find anywhere that says sysUpdater.cia?

The sysupdater cia should be on the root of the sd card as step 6 says:

6. Copy sysUpdater.cia from the sysUpdater zip to the root of your SD card

You just have to load fbi, then select the SD option and it will show all the files on the root, including sysupdater cia.

--------------------- MERGED ---------------------------

May i ask what the name of the file is?

The name of the save file is 0004000000036E00.sav

 

[TwilightWarrior]

I just finished part 1:

https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)

But number 17 doesn't work for me, when I turn off the 3ds and hold the down button while it comes on, homebrew doesnt launch but I need it for number 22 in part 2.

--------------------- MERGED ---------------------------

Ignore my last post,

https://github.com/Plailect/Guide/wiki/Part-2-(9.2.0-Downgrade)

I'm on 23, skipped the rest because it said too if I was already at the right version. But I cant find Emunand9 anywhere in the homebrew launcher, did I do something wrong?

 

[jucaa]

I just finished part 1:

https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)

But number 17 doesn't work for me, when I turn off the 3ds and hold the down button while it comes on, homebrew doesnt launch but I need it for number 22 in part 2.

--------------------- MERGED ---------------------------

Ignore my last post,

https://github.com/Plailect/Guide/wiki/Part-2-(9.2.0-Downgrade)

I'm on 23, skipped the rest because it said too if I was already at the right version. But I cant find Emunand9 anywhere in the homebrew launcher, did I do something wrong?

Although it says to skip to step 22, you still have to download emudand9 from the "What you need" section and put it into your ds card as asked in the first steps.

 

[proflayton123]

I just finished part 1:

https://github.com/Plailect/Guide/wiki/Part-1-(Homebrew)

But number 17 doesn't work for me, when I turn off the 3ds and hold the down button while it comes on, homebrew doesnt launch but I need it for number 22 in part 2.

--------------------- MERGED ---------------------------

Ignore my last post,

https://github.com/Plailect/Guide/wiki/Part-2-(9.2.0-Downgrade)

I'm on 23, skipped the rest because it said too if I was already at the right version. But I cant find Emunand9 anywhere in the homebrew launcher, did I do something wrong?

Personally, if you don't want to mess up and potentially brick by user error id follow every step regardless if at right version or not


Sent from my iPhone using Tapatalk

 

[Divi]

Hi, i'm actually on Luma3DS 5.5 and i would like to know if there is a way to launch .cia DS backup on my n3DS please?

 

[fire888]

Do you have Clock+L2(x) turned on in your Luma3DS settings? Turn it off, and try playing it again, and see if the issue persists.

hi,
sorry I was busy and cannot answer before
I have tried to turn Clock + L2 (it was only clock before), and have tried to turn it back to just Clock. and both still got blank screen.
do u have any other idea for me to try ?

thx

ps : so, what is checked on my luma configuration :
- brightness 4x
- new 3ds cpu Clock
- autoboot sysnand
- sysnand is updated (A9LH-only)
- Force A9LH detection
- Show current NAND in system settings
- Show GBA boot screen in patched AGB_FIRM

Edited : So, I tried to change the New 3ds CPU to off. and VOILA.. no more blank screen.
so, should I just let the new 3ds cpu to off ?
is it good ? cause my 3ds is definitely New 3DS XL (and yes, I know what the difference between N3dsXL and 3dsXL)

 

[Temptress Cerise]

Hi, i'm actually on Luma3DS 5.5 and i would like to know if there is a way to launch .cia DS backup on my n3DS please?

No. Buy a flashcart.

If you want to try the DS Emulator you can, but it's a WIP, and it probably won't work that well.
Link: https://gbatemp.net/threads/wip-3desmume-ds-emulator-for-3ds.430223/

hi,
sorry I was busy and cannot answer before
I have tried to turn Clock + L2 (it was only clock before), and have tried to turn it back to just Clock. and both still got blank screen.
do u have any other idea for me to try ?

thx

ps : so, what is checked on my luma configuration :
- brightness 4x
- new 3ds cpu Clock
- autoboot sysnand
- sysnand is updated (A9LH-only)
- Force A9LH detection
- Show current NAND in system settings
- Show GBA boot screen in patched AGB_FIRM

I meant, to turn it off completely. As in have it set to the following: New 3DS CPU Off(x)

 

[Jitrid]

I'm trying to load someway of installing a LEGIT Cia to sysnand, Considering im on 8.1 Browserhaxx wont work(Right?) I've tried RxTools but it gets stuck on loading RxMode Any ideas?

 

[Temptress Cerise]

I'm trying to load someway of installing a LEGIT Cia to sysnand, Considering im on 8.1 Browserhaxx wont work(Right?) I've tried RxTools but it gets stuck on loading RxMode Any ideas?

How are you launching RxTools? MSET or?