ZIF Connector For Oled Power On BUtton

[gonefishing1975]

Hey Guys

I was working on an Oled Switch and the little tab on the ZIf for the Power On BUtton came off, The console won't power on using the power button, Does anyone know the part number fot this? I find kits for regular switch but not Oled. I did manage to get it to power up once when i place the broken tab in as best I could but then that gave me a purple screen when I powered it one

Thanks

 

[thesjaakspoiler]

gave me a purple screen when I powered it one

A purple screen has nothing to do with the issue with your power button.
It means the Switch isn't able to read the bootloader, which is usually related to the emmc or a modchip.

 

[gonefishing1975]

A purple screen has nothing to do with the issue with your power button.
It means the Switch isn't able to read the bootloader, which is usually related to the emmc or a modchip.

Fixed the purple screen I had desoldered the resistor for cmd connection after removing a bad mod someone did. The connector is the cause of the power on button/volume buttons not working

 

[jkyoho]

The v1/v2 JC rail connector should work with OLED
Found the oled JC/PWR CNT parts number: MOLEX 504740-1100

 

[gonefishing1975]

The v1/v2 JC rail connector should work with OLED
Found the oled JC/PWR CNT parts number: MOLEX 504740-1100

Thanks for finding that