Ever since I've bought the SX Dongle and set my Switch to Auto RCM, I've had issues properly powering up. Basically if I let the switch run out of battery, it would require a constant battle of getting it recognize the dongle in order to power on/ boot up. I dealt with it since it would always eventually boot back up.
I was running 6.20 fine up until a couple months ago when I decided up upgrade to 8.x based on feedback and wanting to play some newer games. After attempting the CFW, I no longer can power the switch on or at least that is what it seems like. Occasionally I can get it to bring up the Nintendo logo, then it will shut off. It also seems to lose charge fairly quickly. It's almost as its in a sleep mode that it cant get out of. Any ideas, thoughts on how to get it out of this state?
At this time, when I press the power once then release and press and hold for 15 seconds and release, I then press power and release and logo comes on but goes off. I do the same with both the dongle and jig installed and same thing occurs. perhaps the switch is broken at this point?
I was running 6.20 fine up until a couple months ago when I decided up upgrade to 8.x based on feedback and wanting to play some newer games. After attempting the CFW, I no longer can power the switch on or at least that is what it seems like. Occasionally I can get it to bring up the Nintendo logo, then it will shut off. It also seems to lose charge fairly quickly. It's almost as its in a sleep mode that it cant get out of. Any ideas, thoughts on how to get it out of this state?
At this time, when I press the power once then release and press and hold for 15 seconds and release, I then press power and release and logo comes on but goes off. I do the same with both the dongle and jig installed and same thing occurs. perhaps the switch is broken at this point?
