Homebrew Homebrew app Ultrahand Overlay - The fully craft-able overlay executor

[fatmeegz]

Hey guys im having an issue. EVerything used to run perfect when i had ultrahand set up through the easy installer package. I cannot find the download for the Easy Installer package for the life of me. ANyone care to help? I'd appreciate it so much... Been a problem now trying to fix for a few days. Let me know! Thank u so much.

 

[fatmeegz]

Can someone please help me? Ive looked everywhere for the Easy Installer package for ultrahand.... PLeaseeee!

 

[TOMSUN]

Hey, master.
I'm encountering an issue while using your Status-Monitor-Overlay.
In the Battery Monitor, the field "Charge Voltage Limit: %d mV\n" (referring to _batteryChargeInfoFields.ChargeVoltageLimit) always shows 0 mV on my device, as well as on several of my friends' devices.
I haven’t modified this part of your code.
Since the GitHub repository doesn’t allow submitting issues, I’m reaching out here to ask for your help.


Thank you very much for this software — I really enjoy using it.

 

[Asia81]

Hello, in what folders the lang files should be placed?

 

[johw]

Hello, in what folders the lang files should be placed?

\config\ultrahand\lang

 

[Andre63]

To install Ultrahand, it is recomended to download and install the latest nx-ovlloader / nx-ovlloader+.

What are the differences between the two?

Thanks to all

 

[johw]

To install Ultrahand, it is recomended to download and install the latest nx-ovlloader / nx-ovlloader+.

What are the differences between the two?

Thanks to all

\config\ultrahand\wallpapers
At first, nx-ovlloader+ takes up almost 2 GB of memory, but in compensation, you can enable wallpapers.

@ppkantorski , thanks for the tip.

Homebrew Homebrew app  Post in thread 'Ultrahand Overlay - The fully craft-able overlay executor'

Jun 24, 2025

@ppkantorski
nx-ovlloader+ v1.1.1
Is it possible to reduce memory Expansion 2MB to 1MB?

unfortunately no. i've tried. the heap can only be iterated in 2mb chunks it appears from testing.

If you aren't already using this, I recommend using CrafyAwesome's memory hack (for HOS 20 only, dont use it on HOS 19 or lower).

https://github.com/Craftyawesome/Atmosphere/tree/memory-hack

you need to add this like to your hekate_ipl entry, as well as the file to your atmosphere folder.

kernel=atmosphere/mesosphere.bin

This will recover around ~1.85 MB of the system...

• ppkantorski

• 
• 

 

[browntigerz]

\config\ultrahand\wallpapers
At first, nx-ovlloader+ takes up almost 2 GB of memory, but in compensation, you can enable wallpapers.

@ppkantorski , thanks for the tip.

Homebrew Homebrew app  Post in thread 'Ultrahand Overlay - The fully craft-able overlay executor'

Jun 24, 2025

@ppkantorski
nx-ovlloader+ v1.1.1
Is it possible to reduce memory Expansion 2MB to 1MB?

unfortunately no. i've tried. the heap can only be iterated in 2mb chunks it appears from testing.

If you aren't already using this, I recommend using CrafyAwesome's memory hack (for HOS 20 only, dont use it on HOS 19 or lower).

https://github.com/Craftyawesome/Atmosphere/tree/memory-hack

you need to add this like to your hekate_ipl entry, as well as the file to your atmosphere folder.

kernel=atmosphere/mesosphere.bin

This will recover around ~1.85 MB of the system...

• ppkantorski

• 
• 

I think its 2MB, 2 gigs would be crazy lol, also does the memory hack still work on 20.3?

 

[the_otsutsuki]

i need some help with my ultrahand guys..

the button combo isnt working randomly for some reason, havent updated anything, havent even turned on my switch in a while. tried deleting and re installing ultra hand, tesla menu, nx overloader, edizon, and edizon overlay and i still cant get my ultrahand to work.. any advice ?

 

[browntigerz]

i need some help with my ultrahand guys..

the button combo isnt working randomly for some reason, havent updated anything, havent even turned on my switch in a while. tried deleting and re installing ultra hand, tesla menu, nx overloader, edizon, and edizon overlay and i still cant get my ultrahand to work.. any advice ?

Did you try Zl ZR and down dpad

 

[the_otsutsuki]

Did you try Zl ZR and down dpad

i have yes, i even checked the config file to make sure the command is the same and it is

mine is set to L+R3+Down

 

[browntigerz]

i have yes, i even checked the config file to make sure the command is the same and it is

mine is set to L+R3+Down

Redownload just ovlmenu from ultrahand github, replace/overwrite and try again.

 

[the_otsutsuki]

Redownload just ovlmenu from ultrahand github, replace/overwrite and try again.

i have done this as well and still nothing on my end

 

[browntigerz]

i have done this as well and still nothing on my end

Ultrahand is supposed to replace teslamenu, maybe try the combination of tesla zl zr dpad down and r3

 

[the_otsutsuki]

Ultrahand is supposed to replace teslamenu, maybe try the combination of tesla zl zr dpad down and r3

i have also tried this. i’ve tried every combination there is to open either menu

 

[browntigerz]

i have also tried this. i’ve tried every combination there is to open either men

go into breeze, settings, sys modules and see if tesla is enabled

 

[the_otsutsuki]

go into breeze, settings, sys modules and see if tesla is enabled

i’ll check again here in a bit, i’m trying the fix archive bit thing right now

EDIT

fixing the archive bit seemed to work but now when i try to open edizon through the ultrahand overlay in a game, it crashes

SECOND EDIT

was able to get everything working again

 

[browntigerz]

Hi, does the new update work with masagrator status monitor overlay, the key command to bring up the mini display just opens the status monitor overlay

 

[ppkantorski]

Hi, does the new update work with masagrator status monitor overlay, the key command to bring up the mini display just opens the status monitor overlay

Masagrator's Status Monitor Overlay official does not use libultrahand. My fork does, so it has more mode and fast launching and swapping features. Mini currently doesn't have a mode type entry point available to it on v1.2.0 like v1.1.9+. Micro does, but you have to manually specify it `--microOverlay`. On my fork its `-mini` and `-micro`. My fork also auto-adds the modes the first time it is open to Ultrahand's overlays.ini for status monitor.

 

[browntigerz]

Masagrator's Status Monitor Overlay official does not use libultrahand. My fork does, so it has more mode and fast launching and swapping features. Mini currently doesn't have a mode type entry point available to it on v1.2.0 like v1.1.9+. Micro does, but you have to manually specify it `--microOverlay`. On my fork its `-mini` and `-micro`. My fork also auto-adds the modes the first time it is open to Ultrahand's overlays.ini for status monitor.

Thanks, ill stick with yours since it seems to be more compatible with ultra hand.