Im kind of lost here so let's start with the beginning. 2 weeks ago when I booted into hekate, I got a message saying that my sd card was running at 5mbps. I looked it up online and took the switch apart, turns out my fpc connector (micro sd conection)on the motherboard was damaged and needed to be replaced. I brought the switch to a repair place and they were successful at replacing the connector, that night I dont remember what I was doing exactly but basically doing some file transfer between the switch and my pc, when suddenly my switch crashed and wasn't able to boot back in atmosphere. The sd card fpc connector was faulty and couldn't read the sd card. I tried to just open the switch normally without any jig just ofw power on and the console would not boot so then I looked that up and after some research and my switch telling me that I had 21 fuses burnt, I realized that my fuses burnt didn't match my ofw firmware (i was on 18.1). Fast forward to yesterday, i got the switch repaired with a new fpc connector and everything works related to that issues. Now during my research I read that my ofw must match the fuses burnt so I booted into hekate and launched SYSMMC and updated that to version 20, after that my switch was able to boot normally with no sd card but all my atmosphere games were on my screen asking to be re downloaded and this where everything was just weird how was i able to see hacked games and gba roms on my screen in normal boot with no sd card with all my official saves gone but all the atmosphere saves all there but corrupted. So I made emummc and sysmmc the same firmware and booted in atmosphere, but then everything was corrupted atmosphere would crash when I tried to open anything but applet mode ( i got the newest atmosphere and hekate package ). At this point I just gave up and booted back in sysmmc and downgraded to 19.0 just to see what would happen, well lots did happen (i dont remember everything unfortunately) what i do remember is this. I copy/pasted all the files from my sd card to a different sd card, that new sd card can inject fuse.bin like I use too before everything that happened described in this post, when I look in my firmware in my sysmmc ofw and my cfw I'm on firmware 18.1 when I switch my sd card to the old one I'm on firmware 19 so I deleted everything on the old sd card partition and all and copy/pasted the contents on the new card to the old one. The old card is still on 19.0 and the new one is on 18.1, both sd card are launching stock option sysmmc but they both have different firmware. How is that possible.
My biggest question are why do I have 2 different firmware for both cards and why did I see all my atmosphere games and roms on stock when went on firmware 20 to match my fuses burnt and had no sd card in the console
Switch is v1 had done the 29gb partition with hekate when I hacked it years ago and to go in stock mode I would just start the switch with no jig, never enabled no RCM mode
My biggest question are why do I have 2 different firmware for both cards and why did I see all my atmosphere games and roms on stock when went on firmware 20 to match my fuses burnt and had no sd card in the console
Switch is v1 had done the 29gb partition with hekate when I hacked it years ago and to go in stock mode I would just start the switch with no jig, never enabled no RCM mode
