Switch will not boot except for hekate

[jamb84]

Hi,

I'm looking for some technical advice. I have a patched V1 Erista model switch. Was working fine. Installed hwfly core modchip and now can boot only to hekate. Cannot boot CFW or OFW. After removing the chip I still can't boot into OFW. I don't even get to the nintendo logo and it is not in RCM mode.

I have checked the caps and they look fine and I can't see any other damage either. I have tried a rebuild of the nand which hasn't done anything either.

With logging turned on in hekate it goes through all the initialisation correctly and shows "rebuilt and loaded pkg2" followed by "booting" before going to a black screen.

I've explained all of this to a local console repairer who believes he could fix it, which makes me think the symptoms are common to a specific issue but I can't find anything that has helped me yet.

I feel that I could repair it if I could figure out what the cause was, and since the repairer thinks it is still repairable I believe this should be possible.

Does anyone know of anything specific I could check or attempt to try to get this booting again?

 

[binkinator]

Hi,

I'm looking for some technical advice. I have a patched V1 Erista model switch. Was working fine. Installed hwfly core modchip and now can boot only to hekate. Cannot boot CFW or OFW. After removing the chip I still can't boot into OFW. I don't even get to the nintendo logo and it is not in RCM mode.

I have checked the caps and they look fine and I can't see any other damage either. I have tried a rebuild of the nand which hasn't done anything either.

With logging turned on in hekate it goes through all the initialisation correctly and shows "rebuilt and loaded pkg2" followed by "booting" before going to a black screen.

I've explained all of this to a local console repairer who believes he could fix it, which makes me think the symptoms are common to a specific issue but I can't find anything that has helped me yet.

I feel that I could repair it if I could figure out what the cause was, and since the repairer thinks it is still repairable I believe this should be possible.

Does anyone know of anything specific I could check or attempt to try to get this booting again?

Long shot, but maybe your eMMC is loose? In Hekate, you will find it under console info —> eMMC. It should show you if it’s coming online properly and display the boot0/1 partitions as well as your USER partition table.

 

[jamb84]

Long shot, but maybe your eMMC is loose? In Hekate, you will find it under console info —> eMMC. It should show you if it’s coming online properly and display the boot0/1 partitions as well as your USER partition table.

I wish that were the case, but I can read and write the emmc perfectly fine in hekate, and the issue still persists without the chip installed with the emmc plugged back into it's slot.

 

[binkinator]

I wish that were the case, but I can read and write the emmc perfectly fine in hekate, and the issue still persists without the chip installed with the emmc plugged back into it's slot.

Hmmmm. No recent upgrades or surprise burnt fuses? I know hekate bypasses fuse checking but running out of ideas…

 

[jamb84]

Hmmmm. No recent upgrades or surprise burnt fuses? I know hekate bypasses fuse checking but running out of ideas…

Lol. you and me both. it's running 15.0.1 firmware, 7 burnt fuses. so it seems correct. i'm at a loss. i can't understand why it seems to go through all the phases correctly and then nothing.

 

[binkinator]

Lol. you and me both. it's running 15.0.1 firmware, 7 burnt fuses. so it seems correct. i'm at a loss. i can't understand why it seems to go through all the phases correctly and then nothing.

Correct. You’re still at 6.x level fw for fuses so that’s not it.
https://switchbrew.org/wiki/Fuses#Anti-downgrade

Do you have a recent backup of your Sysnand?

Anyone else have better ideas?

 

[jamb84]

Correct. You’re still at 6.x level fw for fuses so that’s not it.


Do you have a recent backup of your Sysnand?

Anyone else have better idea

I did have backup, and i did try that, but after no luck with that one i tried a full rebuild which also didn't work.

i really hope someone has some ideas cause i'm baffled.

Post automatically merged: Feb 20, 2023

I did have backup, and i did try that, but after no luck with that one i tried a full rebuild which also didn't work.

i really hope someone has some ideas cause i'm baffled.

Oh. sorry. I just realised i missed the 1 - 17 fuses. my apologies.

Post automatically merged: Feb 20, 2023

I did have backup, and i did try that, but after no luck with that one i tried a full rebuild which also didn't work.

i really hope someone has some ideas cause i'm baffled.

Post automatically merged: Feb 20, 2023

Oh. sorry. I just realised i missed the 1 - 17 fuses. my apologies.

sorry. i'm not sure i understand your reaction. 17 fuses is correct for this ofw.

 

[binkinator]

I did have backup, and i did try that, but after no luck with that one i tried a full rebuild which also didn't work.

i really hope someone has some ideas cause i'm baffled.

Post automatically merged: Feb 20, 2023

Oh. sorry. I just realised i missed the 1 - 17 fuses. my apologies.

Post automatically merged: Feb 20, 2023

sorry. i'm not sure i understand your reaction. 17 fuses is correct for this ofw.

Just responding to the fact that you already restored from backup and even did a full rebuild. :-o

yes, 17 fuses is correct for 15.x.

 

[jamb84]

Just responding to the fact that you already restored from backup and even did a full rebuild. :-o

yes, 17 fuses is correct for 15.x.

Oh right sorry. I forgot about the merging of messages. Yeah I really think it's hardware but if I can't figure out where I'll probably have to try this repair guy. Just expensive because he charges more for people who tried diy first

 

[bud123]

Oh right sorry. I forgot about the merging of messages. Yeah I really think it's hardware but if I can't figure out where I'll probably have to try this repair guy. Just expensive because he charges more for people who tried diy first

I'm having the same problem. Any info on what it was?

 

[Hayato213]

I'm having the same problem. Any info on what it was?

You should create your own thread, the guy haven't been here for a year.