Switch oled screen connector

[Dlacica]

Sooo i broke my switch oled screen connector. I installed the new one but one of the pads got damaged and I get imagine only when I put some pressure on the connector. Pad is second from the left. This is a donor board, it seems it's no conect. Does someone know is it no conect pad?

 

[Hayato213]

You might have to replace the pad if it is possible.

 

[Dlacica]

You might have to replace the pad if it is possible.

That is no problem but the pad has no leeds, it's blank

 

[Hayato213]

That is no problem but the pad has no leeds, it's blank

If you completely tore the pad, then you probably out of luck, if you only tore part of it, atleast you can replace the pad and resolder it.

 

[Dlacica]

I had another loose pad, this one is no conect, it doesn't connect to anything on the board, blank. Thanks guys for your help

 

[jkyoho]

http://balika011.hu/switch/oled/

board layer scan is your best friend

 

[JonJaded]

That is no problem but the pad has no leeds, it's blank

Check the other side of the board. There's no way it has no leads.