Hacking Start with Enso + MicroSD card in ux0:

[barak06]

Hi !
So i've ordered a vita2sd card and a 3tosd (yfan Lu) and i use a usb with microsd card on my pstv.
I would like to mount my micro sd card (USB, 3g, gamecard) as ux0 and my vita card as uma0 at the start of my vita (without the combo : "open vitashell, mount uma0, unplug/plug mount ux0, close vitashell")
Is it possible ?
thx

Is the link below answer to my question?
http://wololo.net/2017/07/20/setting-sd2vita-adapter-formatting-microsd-can-done-windows/

N.B. Usbmc v2 will do the work for my pstv and its usb ? But how to use ? I don't quiet well understand this (Yfan Lu quoting):
1. you should move ux0:tai/config.txt on your original memory card to ur0:tai/config.txt if you made changes or just delete ux0:tai/config.txt if you have not made changes. If you have a PSTV or LCD model, you must also delete config.txt from your internal memory. You can mount imc0 from VitaShell and delete imc0:tai/config.txt if it exists.
2. modify ur0:tai/config.txt and add ur0:tai/usbmc.skprx under the line that says *KERNEL. You should always use this file to install plugins from now on. Also copy usbmc.skprx to ur0:tai.

 

[riddle43]

that is for USB on the PSTV not the PS Vita. to run your sony card as uma0 you need to run the proper sd2vita plug in that sets your sd card as your ux0 and your sony card will be uma0 but the sony card will only work in retroarch and other emulators iirc