Softmii installation questions.

Discussion in 'Wii - Hacking' started by kobe19840115, Feb 23, 2009.

Feb 23, 2009
  1. kobe19840115
    OP

    Newcomer kobe19840115 Newbie

    Joined:
    Jan 21, 2009
    Messages:
    2
    Country:
    Australia
    About one month ago, I installed RiiskiMod_v2.0. And it works very well.

    Now the final verson of softmii has came out and I am wondering wether to upgrade to softmii 2.1

    Anybody can tell me is it worth to change to softmii 2.1?

    And how can I do it as I already have RiiskiMod_v2.0.

    Thank you very much and please bear with my poor english:)

    Posts merged

    This is the readme file of Riiski Mod V2.0

    --RiskiiMod V2--

    20clarky08, Digitydogs, Ether, NoobWarrior07

    Features:

    -Full Disc "Enhanced" Region-Free

    -Full Channel Region-Free

    -Diagnostic Menu (Recovery) access through GCport1 Y-Button

    -No Copy Save Protections Removed

    -Full Wii Backup Loading From Disc Channel Nearly 100% Compat.

    ~[Thank to cIOScorp]

    -Retail Discs run 6x, Backups run 3x

    -Auto boot (Set as diag) ANY Disc Through Recovery Menu

    -Health warning Removed

    -Skip Disc Updates

    -No Error 002

    -No Annoying Menu BGM

    -Pre loader on RESET Hold

    ~Included dol for pre loader, special "AnyTitleDeleter"

    with MaxTitleCount 512 to unbreak home-brew

    -Regular cIOS for those who have patched discs to 249

    -Disc Dumper Channel *optional

    -Move your Disc Channel anywhere *optional*

    -HBC usage

    -Downgrade Method Included

    -Fix for better MIOS *optional


    After the things we learned from the mass installs of Version 1.0, it was suggested to split this guide into 2 parts.
    However to avoid confusion, am gonna just give a few brief instructions depending on your set up.

    VIRGIN SYSTEM = FULL GUIDE
    GAMMA/HOMEBREW READY SYSTEM 3.3-3.4 = PHASE 2 ONWARDS
    3.2 STARFALL/cIOSCORP = PHASE 3 ONWARDS

    READ THE FULL GUIDE AND END NOTES BEFORE INSTALLATION OR BELIEVE ME YOU WILL HAVE PROBLEMS OK.!!
    WITH THAT OUT THE WAY, HERE WE FUCKIN GOOO!!!



    Requirements:

    ? PAL or NTSC-U Wii [No Others Have Been Tested]

    ? SD Card (of at least 256 MB) [formatted to FAT]

    ? The RiskiiMod Pack, unpacked to your SD card ROOT

    ? Twilight Princess Retail

    ? Internet Connection For Wii (For Full Set up)



    PHASE 1 - This part is the Twilight hack and HBC installation. (Thx 2 Team Twiizers.)


    1) First of all, if you have never played Zelda you need to play it once and create a save file, or you cant copy Twlight.

    2) Copy over Twilight Hack (beta 1 for 3.1-3.3, beta 2 for 3.4) from SD. If you have a Zelda Save, then afraid its goin..

    3) Start Zelda regularly, load the appropriate save, walk backward.

    4) HBC1.01 installer will begin, answer yes to everything. Your system will restart will homebrew channel installed.

    5) Run The "WadManager" you find will find in the list of programs in your HomeBrew Channel.

    6) Install the wad beginning with "wad01"

    7) Press the "Home" button when it finishes.

    8) Launch “WadManager” again

    9) Install "wad02" and hit "Home"



    PHASE 2 – This Will Downgrade Us

    10) Go back into HBC

    11) Run “IOS Downgrader”, if some things fail, run it once more. Ask for help if need-be. ( GBATemp FTW :-p)


    Your Wii IOS's are now proper and hackable, Regardless will still need to get to 3.2, So lets do the following steps after you make sure you have a net connection.


    12) Run HBC

    13) Select and load AnyRegionChanger M5....it'll say stuff about Korean Disc, IGNORE it.(Thx 2 Twiizers + Co..)

    14) Get into the options (Press A), and IGNORE the top section which has region change stuff and EULA stuff.

    15) Look at the mid-bottom options, about installing 3.2 (or 3.3K), and leave it on 3.2E for PAL /3.2U for NTSC

    16) Click "Go" and then answer then answer YES when it asks if you are sure.

    17) Answer "NO" when it asks about Korean Disc Loading *explained later*

    18) Answer "YES" when it asks you to install special starfall-type hacks. Wait for finish, can take a few minutes.
    19) Press any button when it is done to reboot.


    PHASE 3 – OK We should now have a nice 3.2 system installation. Now we can really get goin.


    20) Run Preloader0.25 from HBC (Props 2 Crediar.)

    *CAUTION* USE PRELOADER HACK REMOVER IF YOU HAVE ALREADY INSTALLED PRE-LOADER HACKS TO YOUR SYSTEM OR YOU WILL HAVE ISSUES. THIS CAN BE FOUND IN THE HOMEBREW CHANNEL.


    21) It will install and reboot...your system should now load the PreLoader menu.


    If you do not reboot to Preloader Menu at this time, power off your wii until the light is Red/Orange...
    ...hit Power, then quickly press and HOLD Reset...


    22) Highlight Settings and Press A

    23) Select “Systemhacks” ->

    24) Select all hacks that you'd like (Recommended: All), and do all of same-name hacks

    25) Select "save settings" and wait for glitchy confirmation message to display “Settings Saved”

    26) Press B

    27) Select "autoboot: Systemenu" (using the D-Pad Arrows), and save settings with A, then Press B

    28) Select "install/load DOL" and install atd512.dol. Wait until finished.

    29) Get back to the system menu.

    30) Run HBC

    31) Run cIOScorp Installer.. It may freez briefly. (CORP Thx 2 WiiBlaster + Co...Installer from Me + IceFire.)

    32) Exit and Profit...your Wii is now RiskiiModded.




    OPTIONAL 1, fix your MIOS to an older better version.

    33) Restart your wii with RESET button and HOLD IT
    34) Click "load installed DOL"
    35) Highlight "System Titles" and Press A
    36) Highlight the one with 00000101(MIOS)
    37) Press A to select and again to confirm deletion of it
    38) Reboot the wii by holding power until it restarts
    39) Run HBC and WadManager, Install wad03 and Profit!!!!

    OPTIONAL 2, Move your Disc Channel Anywhere

    After you run AnyRegionChanger but you install Preloader0.25

    In HomeBrew Channel run the Menu patcher application
    select ONLY the move disc channel option after selecting it you must hit save settings and then hit a again.
    (thx 2 digitydogs for this step)

    LOOKS LIKE WE HAVE REGION FREE DISC LOADING DOESNT IT :-)


    NOTES AND CAUTIONS.

    MAKE SURE YOU DONT SELECT YES ON KOREAN DISCS, IT MESS'S WITH .WAD INSTALLATION
    MAKE SURE YOU HAVE FULLY READ THIS GUIDE.
    THE CODE TO INSTALL PRELOADER0.25 IS (1RAIDU = 1, RIGHT, A, 1, DOWN, UP.)


    THANKS AND SHOUTS TO THE FOLLOWING.


    Qleap, Crediar, Waninkoko, Wiigator, Team Twiizers, WiiBlaster, NoobWarrior07, WiiCrazy, icefireicefire, DigityDogs, ArmTheHomeless, IronMask, Jizmo, DJtaz, Ether, DJdynamite, WiiPower, Alejandroues, Neorame, Forsaekn, and basically the hole god damn GBATemp Crew..lol

    http://20clarky08.googlepages.com

    www.gbatemp.net
     
  2. ether2802

    Former Staff ether2802 we have the techno...!!

    Joined:
    Oct 14, 2007
    Messages:
    4,350
    Location:
    Pto. Vallarta
    Country:
    Mexico
    Wow no need to post the entire readme we all know it by heart already [​IMG] just update your Preloader to v0.28 and check at softmii.org for themed menus for your Wii if you like, that's all the update on softmii besides the name...!! [​IMG]



    EDIT: and what do you mean by your poor english..?? aren't you from australia...?? [​IMG]
     
  3. kobe19840115
    OP

    Newcomer kobe19840115 Newbie

    Joined:
    Jan 21, 2009
    Messages:
    2
    Country:
    Australia
    Thank you very much ether2802 [​IMG]

    I am a Chinese student study in Australia : )
     

Share This Page