Hacking Question about emummc with trinket installed

[Madsmaten]

I succesfully modded a trinket inside my switch this weekend.

It is running a dualboot setup, with OFW on power button, and emummc when holding power+vol up.
I did this on fw 8.10, and would like to update the emummc to 9.0.1.

Do I need to check off the "autorcm" safety warning in ChoiDujourNX?
And is there anything I need to consider before booting OFW again after updating the emummc?

 

[Hayato213]

Since you are using Emunand, it doesn't matter if you use AutoRCM or not, if you have AutoRCM enabled when you press the power button it automatically boot into CFW , it doesn't into OFW, Emummc is separate from Sysnand once you create them.

 

[Madsmaten]

Since you are using Emunand, it doesn't matter if you use AutoRCM or not, if you have AutoRCM enabled when you press the power button it automatically boot into CFW , it doesn't into OFW, Emummc is separate from Sysnand once you create them.

I dont have it enabled from software.
The two pins are soldered together and wired to the trinket.

The dual boot proces is: Power = boot to stock
Power and vol up = RCM --> Trinket pushes the payload to console, and boots Emunand.

 

[Hayato213]

I dont have it enabled from software.
The two pins are soldered together and wired to the trinket.

If you did the 7 wires and used the dual boot files, then you have the dual boot setup, by default with the power button without autorcm it goes into OFW, with power and + volume it goes into CFW state, depends on what you play more, if holding an extra button annoy you use autoRCM.

 

[Madsmaten]

View attachment 181885 View attachment 181886
If you did the 7 wires and used the dual boot files, then you have the dual boot setup, by default with the power button without autorcm it goes into OFW, with power and + volume it goes into CFW state, depends on what you play more, if holding an extra button annoy you use autoRCM.

I really like my current setup with the different booting options.
To keep it and updating emummc, all I have to do is check of the warning in ChoidujourNX right?

--------------------- MERGED ---------------------------

Just installed it without the AutoRCM option, and everything works.

Thanks alot!

 

[Hayato213]

AutoRCM doesn't affect Emummc as it doesn't have any fuse for emummc.

 

[ELY_M]

I just do system update in my emummc 4 times. as far I have no issues.

 

[paulzheng]

AutoRCM doesn't affect Emummc as it doesn't have any fuse for emummc.

the fuse takes effect in boot0/1