Hacking Need some help at 4.05

  • Thread starter Thread starter ComX
  • Start date Start date
  • Views Views 5,285
  • Replies Replies 38

ComX

Active Member
Newcomer
Joined
Nov 2, 2015
Messages
40
Reaction score
3
Trophies
0
Age
47
XP
133
Country
Gambia, The
Hey Guys, i´m new here to PS4 Scene..
Yesterday got my PS4 with 4.05 :-)

But now i follow these instruction:
https://playstationhax.xyz/forums/t...or-the-first-time/?tab=comments#comment-34475

The first steps are done, but if i type this:
fakedns.py -c dns.conf

i got this message:
File "C:\Python27\fakedns.py", line 249
print ">> Built NONEFOUND response"
SystaxError: Missing parentheses in call to ´print´. Did you mean print(print ">

Why i got these message.?
Anyone have an idea or can help.?

Thanks
 
Hey Guys, i´m new here to PS4 Scene..
Yesterday got my PS4 with 4.05 :-)

But now i follow these instruction:
https://playstationhax.xyz/forums/t...or-the-first-time/?tab=comments#comment-34475

The first steps are done, but if i type this:
fakedns.py -c dns.conf

i got this message:
File "C:\Python27\fakedns.py", line 249
print ">> Built NONEFOUND response"
SystaxError: Missing parentheses in call to ´print´. Did you mean print(print ">

Why i got these message.?
Anyone have an idea or can help.?

Thanks

If you have an android phone.. It will be easier. Do you have one ?
 
Now i have done some steps more.
Changed the DNS for online storage, got the spectre on webbrowser, waiting for Payload, then start NetcatGui, change port to 9020, add enablewebbrowser405 and hit injekt Payload.
Then got message: Failed To Inject Payload, Make sure the code execution is waiting for payload or the ELF Loader is listening.

Then i push Circle Button on PS4 and hit spectre again, but now don´t load and no reaction cames from PS4, if i push circle, no reaction.
Can i power off the Console, or not.?
I´m a bit confused now :sad:

Now pushed Home Button, then webbrowser and PS4 Shut down, reboot and restore firmware, now boots again ... damn..
But everything is ok... what happend.???
Any Idea.?
 
Last edited by ComX,
Yes, you may need to pull the power cable out if it hangs shutting down.

I had to, it just tells you off and scans hdd for errors, takes minutes.

Tutorial for running exploit host:

1: Extract and load exploit host on laptop or pc, put custom payloads in payload folder ready.

2: On ps4 disable updates and background downloads, connect to same network pc is on, manually change DNS to that shown on exploit host app during wifi setup.

3: Open user guide in settings and chose payload.

3a: If chose spectredev payload: on exploithost app choose option to send payload of your choice.
 
Last edited by KiiWii,
  • Like
Reactions: deSSy2724
Yes, you may need to pull the power cable out if it hangs shutting down.

I had to, it just tells you off and scans hdd for errors, takes minutes.

Tutorial for running exploit host:

1: Extract and load exploit host on laptop or pc, put custom payloads in payload folder ready.

2: On ps4 disable updates and background downloads, connect to same network pc is on, manually change DNS to that shown on exploit host app during wifi setup.

3: Open user guide in settings and chose payload.

3a: If chose spectredev payload: on exploithost app choose option to send payload of your choice.

You dont need to pull the power cable, just press and hold the power button on your PS4 for 10-20 seconds or so, its better (easier and safer) than pulling the cable out.

BTW @ComX to avoid hangouts, freezes, unresponsive buttons and so on dont exploit the console multiple times in one run. All you need is Al-Azifs tool and some payloads and put them in the "payload" folder. Dont use any other tool, this tool from Al-Azif is the best and its updated regularly.
 
Last edited by deSSy2724,
  • Like
Reactions: KiiWii
I am using spesific dns then go to user guide and xvortex-hen. Its easy. You dont need sending payloads (even dumping games if you want)
 
  • Like
Reactions: KiiWii
You dont need to pull the power cable, just press and hold the power button on your PS4 for 10-20 seconds or so, its better than pulling the cable out.

Trust me mine hung, I held power, nothing. Had no option after 10 mins ot trying.

Only happened once though, seemed to be if you load payload, back out, and load another payload....

I am using spesific dns then go to user guide and xvortex-hen. Its easy. You dont need sending payloads (even dumping games if you want)

There are 10+ payloads I have seen, so some might be more useful than others, nice to have option to send own payload.
 
  • Like
Reactions: TR_mahmutpek
@KiiWii
Step two have done at first.
Step one have load expoit online
And my PS4 was on Cable to router and my PC on WLAN.
Tomorrow i put files on my Laptop, put them too to cable and try again.
Thanks for quick and good informations ;-)
if anything is wrong, i will write here tomorrow.. But hope all works fine.
Thxxxxxxx

--------------------- MERGED ---------------------------

@TR_mahmutpek

i used too specific dns, and there was some more to see then spectre.. like same as you wrote and some more..
with this you wrote only can dump games.?
 
Trust me mine hung, I held power, nothing. Had no option after 10 mins ot trying.

Only happened once though, seemed to be if you load payload, back out, and load another payload

Yes, it hangs pretty much every single time if you run the same main exploit (idc, spectre and so on) or if you try to inject multiple payloads (one by one). It happend to me several times, at first I was pulling the cable out but later I tried to hold the power button and it worked for me (I need to hold it much longer on my PS4 Pro than usual compared to other devices).
 
  • Like
Reactions: KiiWii
Yes, it hangs pretty much every single time if you run the same main exploit (idc, spectre and so on) or if you try to inject multiple payloads (one by one). It happend to me several times, at first I was pulling the cable out but later I tried to hold the power button and it worked for me (I need to hold it much longer on my PS4 Pro than usual compared to other devices).

yes right, and i don´t need pulling the cable.. reboots it self and was starting normaly..
now i see exploit DebugSettings and fullDebugSettings405

both need to install or only one.?
 
yes right, and i don´t need pulling the cable.. reboots it self and was starting normaly..
now i see exploit DebugSettings and fullDebugSettings405

both need to install or only one.?

You dont technically install either, you run them.

When you reboot theyre gone.
 
You dont technically install either, you run them.

When you reboot theyre gone.

sorry, that i mean... but which one run.? is there any different.? if not i try then full
or is the normal one enough only to install pgk.?

DONE... have installed the normal debugSettings.. and works...
MANNY MANNY THAAAAANKS :yay:
 
Last edited by ComX,
  • Like
Reactions: KiiWii
sorry, that i mean... but which one run.? is there any different.? if not i try then full
or is the normal one enough only to install pgk.?

DONE... have installed the normal debugSettings.. and works...
MANNY MANNY THAAAAANKS :yay:

But now will Install a .pkg and i got error message: (CE-34704-8) .. damn... whats that.?? :O
 
i got this message:
File "C:\Python27\fakedns.py", line 249
print ">> Built NONEFOUND response"
SystaxError: Missing parentheses in call to ´print´. Did you mean print(print ">

Why i got these message.?
Anyone have an idea or can help.?

Sure.

You installed Python 3.6.x when the fakedns.py code is for Python 2.x (Python 3.x removed the print statement and introduced the print() function).

Who made that utility forgot to specify the Python version/didn't wrote it compatible with Python 3
 
  • Like
Reactions: KiiWii

Site & Scene News

Popular threads in this forum