Hacking Question My switch suddenly wont turn on

[ComicMaster148]

I have a switch with cfw and was playing fire emblem an hour ago but now it wont tun on. Can anyone help me?

 

[Budsixz]

too vague imo
what cfw? battery OK? autorcm?
what have you tried already

 

[pop13_13]

.

 

[ComicMaster148]

too vague imo
what cfw? battery OK? autorcm?
what have you tried already

Atmospher, auto rcm on, and just the power button

 

[pop13_13]

.

 

[ComicMaster148]

Does it get detected in Windows?

Im not at my personal computer. Right now Im not in the situation to use it right now

 

[Hernie]

Plug in the power cable and Hold the power button for like 15 seconds....then try charging it ,(it'll probably just be a black screen).

Sent from my SM-G975U using Tapatalk

 

[CanIHazWarez]

If your Switch has autoRCM, and you do not send a payload, it will just show a black screen when it boots. This black screen is indistinguishable from the Switch just being off. The system will not charge while on this black screen. When you plug in the system to charge it, the system tries to power on. However, since you're not injecting a payload, it just stays on the black screen. Since it can't charge on the black screen, the system does not get charged. The way to fix this is to plug in the system, hold down the power button for a good 10 seconds to turn it off (since it's on the black screen), and wait five minutes for it to charge. Then unplug it from the charger and turn the system on while injecting the payload. Once you have the system actually booted, you can put it back on the charger to let the battery charge the rest of the way.
If it doesn't work the first time, don't panic. You probably just turned the system ON whenever you held the power button instead of OFF. It's impossible to tell whether the system is on or off without injecting the payload. If it won't boot with the payload injected, it means the battery is still dead and to try charging it again. And if you're using something like an SX Pro dongle, make sure the dongle is charged as well (takes less than five seconds to charge it).

 

[ZachyCatGames]

If your Switch has autoRCM, and you do not send a payload, it will just show a black screen when it boots. This black screen is indistinguishable from the Switch just being off. The system will not charge while on this black screen. When you plug in the system to charge it, the system tries to power on. However, since you're not injecting a payload, it just stays on the black screen. Since it can't charge on the black screen, the system does not get charged. The way to fix this is to plug in the system, hold down the power button for a good 10 seconds to turn it off (since it's on the black screen), and wait five minutes for it to charge. Then unplug it from the charger and turn the system on while injecting the payload. Once you have the system actually booted, you can put it back on the charger to let the battery charge the rest of the way.
If it doesn't work the first time, don't panic. You probably just turned the system ON whenever you held the power button instead of OFF. It's impossible to tell whether the system is on or off without injecting the payload. If it won't boot with the payload injected, it means the battery is still dead and to try charging it again. And if you're using something like an SX Pro dongle, make sure the dongle is charged as well (takes less than five seconds to charge it).

>Charging doesn’t work in RCM
It does, albeit very slowly.

 

[ComicMaster148]

If your Switch has autoRCM, and you do not send a payload, it will just show a black screen when it boots. This black screen is indistinguishable from the Switch just being off. The system will not charge while on this black screen. When you plug in the system to charge it, the system tries to power on. However, since you're not injecting a payload, it just stays on the black screen. Since it can't charge on the black screen, the system does not get charged. The way to fix this is to plug in the system, hold down the power button for a good 10 seconds to turn it off (since it's on the black screen), and wait five minutes for it to charge. Then unplug it from the charger and turn the system on while injecting the payload. Once you have the system actually booted, you can put it back on the charger to let the battery charge the rest of the way.
If it doesn't work the first time, don't panic. You probably just turned the system ON whenever you held the power button instead of OFF. It's impossible to tell whether the system is on or off without injecting the payload. If it won't boot with the payload injected, it means the battery is still dead and to try charging it again. And if you're using something like an SX Pro dongle, make sure the dongle is charged as well (takes less than five seconds to charge it).

Ok I will try your suggestion once I get home

 

[ComicMaster148]

If your Switch has autoRCM, and you do not send a payload, it will just show a black screen when it boots. This black screen is indistinguishable from the Switch just being off. The system will not charge while on this black screen. When you plug in the system to charge it, the system tries to power on. However, since you're not injecting a payload, it just stays on the black screen. Since it can't charge on the black screen, the system does not get charged. The way to fix this is to plug in the system, hold down the power button for a good 10 seconds to turn it off (since it's on the black screen), and wait five minutes for it to charge. Then unplug it from the charger and turn the system on while injecting the payload. Once you have the system actually booted, you can put it back on the charger to let the battery charge the rest of the way.
If it doesn't work the first time, don't panic. You probably just turned the system ON whenever you held the power button instead of OFF. It's impossible to tell whether the system is on or off without injecting the payload. If it won't boot with the payload injected, it means the battery is still dead and to try charging it again. And if you're using something like an SX Pro dongle, make sure the dongle is charged as well (takes less than five seconds to charge it).

Thanks yor advice helped me out