Hacking my ds doesnt boot

  • Thread starter Thread starter fristi
  • Start date Start date
  • Views Views 2,453
  • Replies Replies 15
iz it fixable?

oh yeah and i was updating firmware


edit:
100 posts!!!!!!!!!!!!!
*getting beer*
 
Updating Firmware..

The DS doesn't HAVE updatable firmware..Unless you mean FlashMe? You didn't turn it off while it was busy or anything I hope?

PS: Your spelling, grammar and punctuation is a disgrace to all dutch people >_>

PS2: If your flashing procedure shut down prematurely, you've been left with a half-written FlashMe.
If you're LUCKY, you can use the Recovery Mode to still be able to continue flashing(If it went over ~5%)
If not, you now have a nice paperweight, congratulations.
 
yeah i mean flashme
i didnt turn it off or something

it worked perfect(only no warning screen
tongue.gif
)
but when i closed battery ~thingy~ it didnt boot anymore

yeah i need to work on my spelling

101 posts!!!!!!!
biggrin.gif

getting more beer
 
- Check if the battery is making contact
- You're sure it worked before you screwed the battery cap thingy.. back in?
- Why did you even USE FlashMe? You have no reason to do it anymore nowadays. (A year ago it'd be normal, but now its uncommon)
- Its weird for a fuse to blow this way.
- Did you leave a piece of metal near the SL-1 hole?

PS:
- The legal age for beer is 16, you don't sound like a 16 year old =P.
- Your body is worth more than 6100 dollars, even with this absurb euro/dollar exchange.
- The human body uses up about 100 Watts

PPS:
- Why am I using these little marks to sum up my statements?...
 
Xeronage said:
- Check if the battery is making contact
- You're sure it worked before you screwed the battery cap thingy.. back in?
- Why did you even USE FlashMe? You have no reason to do it anymore nowadays. (A year ago it'd be normal, but now its uncommon)
- Its weird for a fuse to blow this way.
- Did you leave a piece of metal near the SL-1 hole?

battery is making contact
95% sure
i wanted to remove the stupid warning screen
no metal

ps:
here its legal to DRINK beer under 16
but u cant buy it
 
didnt turn it off

and where do i find a unbricker?

edit:
LULZ view count stuck on 0
tongue.gif
 
Must be a blown fuse then, Look for the F1 Fuse next to the slot-1 cart input (on the right) on the main board. Test this one with a multimeter, and if required, bridge it with some solder.
 
do i need to open up ds?

edit:
o now i see main board
tongue.gif

thats a yes
tongue.gif


edit 2:
i dont have tri screwd... thing
 
Wait..you dont have a tri wing but you can see the main board?

http://www.m3wiki.com/images/f/f5/Usgcpux3fuses.jpg

Check both fuses, low resistance is good, But if its in the ten-thousands, it's bad. (Blown fuse)

You do know how to solder I hope. (If you can't even operate a multimeter, please, do not attempt to solder for your stupidity will burn a hole in it..) (No Tape doesn't work)(No, glue doesn't either)(No a carbon pencil doesn't work either to my dismay)
 

Site & Scene News

Popular threads in this forum