Hacking My Current Gateway/CFW Setup

[prototech]

I'm curious as to what kind of setup everyone else out there has.

Here's what I'm running:
- N3DS w/ 9.0.0 sysNAND
- MSET exploit
- Gateway CFW w/ 9.0.0 emuNAND
- All backups converted to CIA
- Ninjhax CIA on emuNAND
- NTR CFW 2.2 on retail Cubic Ninja for the SaveManager plugin

With this setup I can use my N3DS without my Gateway card for the most part, in order to save battery life, I can boot into Gateway mode without Cubic Ninja, I can access homebrew through Ninjhax without constantly switching my Cubic Ninja save, and finally I can use NTR's save manager plugin to restore all of my saves to my retail carts.

Does anyone have a better setup? Any suggestions for mine?

 

[Kartoffel]

I'm curious as to what kind of setup everyone else out there has.

(I hope you don't refer to CFW setups specifically, or else this post would be awkwardly unfitting :S)
ALBW Limited Edition 3DS XL
sysNAND: 4.5 (downgraded)
emuNAND: 9.7 (latest)
Backups:
Some installed as .cia to use the internal SD Card space;
Some others as .3ds/.3dz on Gateway Card. (I don't want my whole library with me all the time, focussing on a smaller amount makes me enjoy my games more tbh)

I don't want a CFW because I don't need it^^
The Gateway Card rests in my 3DS almost all the time.

EDIT: Confused "relate" with "refer" ._. (not a native speaker)

 

[niño de cobre]

I'm curious as to what kind of setup everyone else out there has.

Here's what I'm running:
- N3DS w/ 9.0.0 sysNAND
- MSET exploit
- Gateway CFW w/ 9.0.0 emuNAND
- All backups converted to CIA
- Ninjhax CIA on emuNAND
- NTR CFW 2.2 on retail Cubic Ninja for the SaveManager plugin

how this setup works? u play cia games on emunand?

i ask cause right now im gonna setup my n3ds 8.1 jap and im looking for a good configuration.

 

[prototech]

how this setup works? u play cia games on emunand?

i ask cause right now im gonna setup my n3ds 8.1 jap and im looking for a good configuration.

Correct, I never use the Gateway flash card to play any games. I have converted all of my ROM's to CIA files.

 

[Luckkill4u]

Poorman's o3DS:
-o3DS 4.2 sysNAND
-AK2i AKAIO 1.9 With ROP Loader
-Trick CFW emuNAND 1
-rxTools 9.7 emuNAND 2

Still in the process of getting this together right now.

 

[prototech]

Poorman's o3DS:
-o3DS 4.2 sysNAND
-AK2i AKAIO 1.9 With ROP Loader
-Trick CFW emuNAND 1
-rxTools 9.7 emuNAND 2

Still in the process of getting this together right now.

I like your multi emuNAND setup. I was thinking about doing that with rxTools and Gateway for decrypting xorpads, but I think that using decrypt9 through Ninjhax is my best bet since I would be having to swap Cubic Ninja saves.

 

[Technicmaster0]

I have two Main 3ds consoles.
N3ds xl with 9.0 sysnand, cubic Ninja for homebrew and oot3d with a GW for emunand (9.4 i think).
3ds xl 4.5 with 2.0 twl_firm, flashcard timewarp and cyclods ievolution.

 

[IronClouds]

I'm old school and keep it simple:

• Blue 4.5 o3DS XL
• 9.7 emuNAND
• Gateway

 

[prototech]

I have two Main 3ds consoles.
N3ds xl with 9.0 sysnand, cubic Ninja for homebrew and oot3d with a GW for emunand (9.4 i think).
3ds xl 4.5 with 2.0 twl_firm, flashcard timewarp and cyclods ievolution.

I have an O3DS lying around and I can't figure out if I want to sell it or not. This sounds interesting, but is there any advantage to using a second console for a DS flash card?

 

[Deleted member 333767]

I keep it nice and simple.

N3DS XL
-9.0 sysNAND
-MSET to launch emuNAND
-Gateway with 128gb SD

Black/Silver O3DS XL
-9.2 sysNAND
-Not much going on with this console, serves as a back-up unit.

And finally, my pride and joy:

White O3DS XL
-4.4 sysNAND
-MSET to launch emuNAND
-Borrow Gateway cart from N3DS when needed, all games/homebrew installed as CIA.

All 3 of these units are getting posted today for NAND access mods

 

[Technicmaster0]

I have an O3DS lying around and I can't figure out if I want to sell it or not. This sounds interesting, but is there any advantage to using a second console for a DS flash card?

Well the ievo is the only flashcard that supports dsi enhanced games and homebrew.

 

[VinsCool]

My set-up:

O3DS XL;
Sysnand 9.2
Emunand 9.7 (RXmode/Gateway)

N3DS XL;
Sysnand 9.0
Currently no emunand (awaiting KARL3DS/Gateway to support emunand 9.7 so I could do a system transfer)
Ninjhax and Gateway (I don't need it anymore on my O3DS since I have RXtools doing the job just fine.)

 

[pokemoner2500]

Main:
Black o3ds
4.2 sysnand (downgraded)
gateway
9.5 emunand (too lazy to update)

Backup:
9.2 sysnand
no emunanayd yet

 

[BamItzMuffinz]

Mine is:

- White N3DS on sysNAND 9.0
- MSET for emuNAND
- emuNAND 9.5 (on a 64GB mSD card - most of my games are .CIA for convenience)
- Gateway 3DS with 32GB mSD card (with games that can't be converted to .CIA)
- Cubic Ninja with the GW exploit still on it (not sure what to really do with it now...)

Works fine for me, I get great battery life and everything works how I want it to. The only thing I miss out on that I'd really like is Spiderhax, but AFAIK that's o3DS only. Most of my games I've had to download (yes, I own all of them, bar a couple) because I can't convert to .CIA myself. This setup works perfect for me, but if there's more to add to it, I'll give it a go.

 

[Samwix]

AC Limited Edition 3DS XL
SysNAND : downgraded 4.5 with PBT-CFW
EmuNAND : RX-E 9.7

Waiting for a GW! But it seems that I can't order on YeahGeek...

 

[CravingCritic]

Blue O3DSXL/Pink Aluminum case
4.2 (US) sysNAND
PBT-CFW
9.8 (EUR) emuNAND

Debating on setting up a non-region-swapped emuNAND for my US region carts using the multi-emuNAND tool.

 

[NostalgicMillennial]

I'm curious as to what kind of setup everyone else out there has.

... All backups converted to CIA

I used 3DS to CIA converter at "the max" (the one that requires python 1.5)

I want to know how you did THIS. I have a 4.5 o3DS and dumped my xorpads AND got the 7x key and all the other crap around it. Also got o3DS XL and a N3DS (currently running) But i still can't region free and convert Gundam the 3D Battle. And I can't find a CIA of this anywhere. (NOT asking WHERE to get it mind you) I got it to convert but the CIA gives me a black screen on launch. I "found" a converted CIA a user at a certain 3DS forum posted but It's not region free and gives an error that the game could not be started.....

 

[Samwix]

Blue O3DSXL/Pink Aluminum case
4.2 (US) sysNAND
PBT-CFW
9.8 (EUR) emuNAND

Debating on setting up a non-region-swapped emuNAND for my US region carts using the multi-emuNAND tool.

9.8?

 

[niño de cobre]

white n3ds
8.1j (sysnand) with MSET
9.4j (emunand) with default 4gb microSD
GW (8gb microSD for games) + Sky3ds (just for cubic ninja) + DStwo (for ds games + emus)

im too lazy to install more shit (cia, cfw, etc)

 

[Omer]

New 3ds xl:
nand 9.0 emunand 9.4
Gateway for all .3ds games
Sky3DS for cubic ninja only