1. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    Hello, Ive a problem, few days ago I tried to update my switch 9.2.0 to 10 using choidujournx but at the end I got errors with pkg installation (it was written) and choidujournx said 100% so I reboot and I got black each time I boot with all method
    So I restored my nand backup, and all is fine now

    But I want to update my switch, what should I do ?
     
  2. bad361

    bad361 GBAtemp Advanced Fan
    Member

    Joined:
    Jun 18, 2018
    Messages:
    788
    Country:
    Russia
    You get legit 10.0 FW files and do a fresh atmos install after, easy as that. I went from 9.1 to 10 with choi without a single problem. Also make sure to have either f32 sd or just don't forget to choose exfat when updating with choi.
     
    Last edited by bad361, Apr 30, 2020
  3. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    I forget to precise that all files are updated.
     
  4. JonJaded

    JonJaded GBAtemp Fan
    Member

    Joined:
    May 22, 2016
    Messages:
    474
    Country:
    United States
    If you got a blackscreen when you booted it's because your sd card is formatted as exfat and you chose the fat32 version of fw 10 when preforming the switch install.

    The "error" you likely saw was the prompt for autorcm being on or disabled.

    Just do it again because Choi won't install files that are bad, and atmosphere does not block fw updates.
     
    Last edited by JonJaded, Apr 30, 2020
  5. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    I always choose Exfat update and my sd card is in FAT32
     
  6. Cyan

    Cyan GBATemp's lurking knight
    Former Staff

    Joined:
    Oct 27, 2002
    Messages:
    23,256
    Country:
    France
    Maybe you used a version of AMS which prevented BIS writing?
    you might need to add flags to allow homebrew to get write access to that area.

    enabling BIS writing is considered dangerous and why write access has to be manually restored.
    you might want to delete that authorization once not needed.

    old:
    create a new "flags" folder in sd:/atmosphere/
    and a new empty file named hbl_bis_write.flag in it like this :
    sd:/atmosphere/flags/hbl_bis_write.flag

    more (outdated?) info
    https://switch.homebrew.guide/usingcfw/manualupgrade#step-2-allow-choidujournx-to-write-to-bis
    note : hbl_bis_write.flag. <-- the last dot is NOT part of the flag filename, it's the end of the sentence.


    new? I'm not sure if it superseded the old file method, or is just another way to do it.
    edit the file sd:/atmosphere/config/system_settings.ini
    add (or edit) :
    enable_hbl_bis_write = u8!0x1
     
    Last edited by Cyan, Apr 30, 2020
    Xyphoseos likes this.
  7. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    Thank I go to try
     
  8. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    I retried using your settings and nothing change, but before I took a screenshot in the app
    2020043017345800-DA63280140B1530CD17755515D814CFE.jpg
     
  9. Cyan

    Cyan GBATemp's lurking knight
    Former Staff

    Joined:
    Oct 27, 2002
    Messages:
    23,256
    Country:
    France
    thanks for taking the time to try, even if you already had a working setup (you restored a backup and updated officially right?).

    I'm sorry I don't know what the problem is with these safe PKG.
    I really thought the BIS protection was the problem.

    I don't know if these errors are related to bis or not.
    which did you try? both flag file and settings?
     
  10. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    I edit in settings because I saw a line where it is already written
     
  11. Reecey

    Reecey Mario 64 (favorite game of all time)
    Member

    Joined:
    Mar 7, 2010
    Messages:
    5,866
    Country:
    What does it do when you press reboot? after flashing the firmware. Where did you get your 10.0.2 firmware from?
     
    Last edited by Reecey, Apr 30, 2020
  12. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    Reboot, atmos picture and black screen (I dont see the atmos logo)
    I downloaded it from the darth site
     
  13. Reecey

    Reecey Mario 64 (favorite game of all time)
    Member

    Joined:
    Mar 7, 2010
    Messages:
    5,866
    Country:
    Have you tried updating ChoiDujournx I notice you are using version 1.0.1 not the latest 1.0.2
     
    Xyphoseos likes this.
  14. 8BitWonder

    8BitWonder Small Homebrew Dev
    Member

    Joined:
    Jan 23, 2016
    Messages:
    2,288
    Country:
    United States
    Not sure if it'll help your current situation, but I noticed from your screencap that you're running ChoiNX v1.0.1 and not the latest v1.0.2.
    You can grab it from here: https://switchtools.sshnuke.net/

    Edit: Ninja'd
     
    Last edited by 8BitWonder, Apr 30, 2020
  15. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    Okay so, I updated but when the app is testing bis keys
    At 1/6 the app crash
     
  16. Cyan

    Cyan GBATemp's lurking knight
    Former Staff

    Joined:
    Oct 27, 2002
    Messages:
    23,256
    Country:
    France
    so it seems related to BIS ?
    try to remove the setting from atmosphere config file ? maybe it would show a proper error in choixNX instead of crashing?
    then try the file flag, instead of the setting? well, if you are still willing to do some tests, but that would be nice to have a solution to help more users.

    there's also the new AMS setting to hide/mitm prodinfo, but it shouldn't be enabled by default as it's still in beta phase.
     
    Last edited by Cyan, May 1, 2020
  17. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    I tried both setting and flag
    If I remove atmos setting, i have to configure them another time, what should I activate/turn on?
     
  18. Cyan

    Cyan GBATemp's lurking knight
    Former Staff

    Joined:
    Oct 27, 2002
    Messages:
    23,256
    Country:
    France
    The BIS protection is not supposed to be permanently disabled, to prevent console bricking by malware homebrew (there were one released few months ago, disguised as a leaked Pokemon game).

    if you already tried both file flag and settings, then I don't know what the problem could be.
    it still seems related to a BIS access as the app crashes on these steps (or just after?).

    Maybe someone else will have more ideas or know the exact issue you are having.
     
  19. Xyphoseos

    OP Xyphoseos Hack or no games
    Member

    Joined:
    Jun 29, 2016
    Messages:
    1,753
    Country:
    France
    To be sure, flag have to be in
    Sd:\\ atmosphere\flag ?

    It chashes at the BIS testing 1/6, directly
     
  20. 8BitWonder

    8BitWonder Small Homebrew Dev
    Member

    Joined:
    Jan 23, 2016
    Messages:
    2,288
    Country:
    United States
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - choidujounx, blocking, update