I need boot.dol to start SystemMenu

[marianoctes]

Sorry for my English.

I have a wii brick.

Currently priiloader loads when starting USBLoaderGX.

Wii joysticks are not recognized by USBLoaderGX

I need to enter the system menu to reconfigure the joysicks

I can't start system menu from priiloader because the joystick was deconfigured and it doesn't recognize the wii

I need a .dol to replace the one in USBLoaderGX.
This .dol should start the wii's system menu

 

[XFlak]

Just remove your sd or usb from the wii and turn it on, if it's a forwarder it should reload the system menu when the app is not found

Or force your way to system menu to resync by launching priiloader then wait 15 seconds before holding reset for another 15 seconds

Also in newer versions of priiloader you can navigate its menu using the front power and reset buttons on the console

 

[marianoctes]

Just remove your sd or usb from the wii and turn it on, if it's a forwarder it should reload the system menu when the app is not found

Or force your way to system menu to resync by launching priiloader then wait 15 seconds before holding reset for another 15 seconds

Also in newer versions of priiloader you can navigate its menu using the front power and reset buttons on the console

1. If I remove the SD and turn on the wii, there is an infinite loop with the USBLoaderGXForwader, rebooting until it finds boot.dol

2. I already tried forcing from priiloader, waiting for 15 seconds and pressing reset, it resets and the screen goes black.

3. I can't install newer versions of priiloader.

I tried replacing the latest version of USBLoaderGX in the app, without a config file. In that case the The Homebrew Channel starts (in which I cannot move because it does not recognize the joystick)

 

[XFlak]

It sounds like your priiloader settings are set to return to the installed file instead of the system menu all the time, not just on start up, which makes things more difficult. I think most if not all apps that would try to load the system menu would just get overridden by priiloader's return to setting (not 100% sure on this to be fair)

Depending on the version of priiloader u have installed u can navigate its menu using a usb keyboard or gamecube controller.

 

[marianoctes]

It sounds like your priiloader settings are set to return to the installed file instead of the system menu all the time, not just on start up, which makes things more difficult. I think most if not all apps that would try to load the system menu would just get overridden by priiloader's return to setting (not 100% sure on this to be fair)

Depending on the version of priiloader u have installed u can navigate its menu using a usb keyboard or gamecube controller.

I could use a recent version of priiloader to replace the USBLoaderGX boot.dol.

To use the keyboard and start system menu

EDIT:

I think I could solve my problem using what is in this thread.

"Priiloader Shortcut Channel"


but the latest available version of priiloader that is compatible with the wii buttons and keyboard