Breeze with simple menu

[TomSwitch]

Starting from beta 88 Breeze shall have a simple menu


Simple menu will be the default. It will hide all the buttons that are distracting for new (and maybe turned offed) users and streamline the process of using the frequently used features.


Learn all the features from the simple menu before switching to full menu. To go back to simple menu go to setting and use the simple menu button


Simple search button to start the search. It's the setting that I always use for the first search. See number search number.


Simple advance cheat menu that have infrequently used buttons removed


Simple bookmark menu that supports pointer search process. Use SearchBookmark button to find bookmark that has the correct value and the Perform Clean up button to clear away those with invalid pointers.


From bookmark go to memory explorer and press pointer search button to go to simple pointer search menu.


Default values are my commonly used setting. Just press the "Start pointer search" button and see if there is enough pointers added to bookmark by the BM number in the status line on the left panel. To get more the parameters can be adjusted, say depth increased to 7 for example and continue the search.

 

[ranma99vn]

@TomSwitch
Hi Tom i could not find the "watch" after find the location for of the value? breeze 88

NVM got it

 

[TomSwitch]

@TomSwitch
Hi Tom i could not find the "watch" after find the location for of the value? breeze 88

NVM got it

Is it you didn't switch to full menu? All the ASM related buttons are hidden in simple menu. I deem it too complicated for beginners.

 

[ranma99vn]

Is it you didn't switch to full menu? All the ASM related buttons are hidden in simple menu. I deem it too complicated for beginners.

thanks @TomSwitch found it

 

[WiduraGoez]

may I Ask something...I use the breeze beta 88....and search for HP on DNF v.1.0.7......try to find the address....found the address..next when i use Pointer search...and use Start Pointer search....it says "next_depth" Nothing process..can you help me..i have been try over and over searching with the correct adress..and it stil says the same...Thank you

 

[dsrules]

may I Ask something...I use the breeze beta 88....and search for HP on DNF v.1.0.7......try to find the address....found the address..next when i use Pointer search...and use Start Pointer search....it says "next_depth" Nothing process..can you help me..i have been try over and over searching with the correct adress..and it stil says the same...Thank you

increase the search range

 

[TomSwitch]

may I Ask something...I use the breeze beta 88....and search for HP on DNF v.1.0.7......try to find the address....found the address..next when i use Pointer search...and use Start Pointer search....it says "next_depth" Nothing process..can you help me..i have been try over and over searching with the correct adress..and it stil says the same...Thank you

Nothing means there isn't any pointer that would fit the range. You can increase the range and try again. There are three settings that you can adjust. The default of 2, 4, 800 works for many but not all

If you look at a cheat code you can tell depth and range but not the num_offsets setting that can find it
To get the depth you count the number of code type 5 lines, here you have depth of 6. The largest range of all the offset is 6C0
[life 7]
580F0000 0671D508
580F1000 000000B8
580F1000 00000008
580F1000 00000020
580F1000 00000020
580F1000 000006C0
780F0000 00000010
640F0000 00000000 00000007

 

[WiduraGoez]

Nothing means there isn't any pointer that would fit the range. You can increase the range and try again. There are three settings that you can adjust. The default of 2, 4, 800 works for many but not all

If you look at a cheat code you can tell depth and range but not the num_offsets setting that can find it
To get the depth you count the number of code type 5 lines, here you have depth of 6. The largest range of all the offset is 6C0
[life 7]
580F0000 0671D508
580F1000 000000B8
580F1000 00000008
580F1000 00000020
580F1000 00000020
580F1000 000006C0
780F0000 00000010
640F0000 00000000 00000007

Nothing means there isn't any pointer that would fit the range. You can increase the range and try again. There are three settings that you can adjust. The default of 2, 4, 800 works for many but not all

If you look at a cheat code you can tell depth and range but not the num_offsets setting that can find it
To get the depth you count the number of code type 5 lines, here you have depth of 6. The largest range of all the offset is 6C0
[life 7]
580F0000 0671D508
580F1000 000000B8
580F1000 00000008
580F1000 00000020
580F1000 00000020
580F1000 000006C0
780F0000 00000010
640F0000 00000000 00000007

I Try every range..but still nothing process, This is the code that i want to update :

[P1 HP Max ]
580F0000 076A5120
580F1000 00000010
780F0000 000010B4
640F0000 001053B0 000005DC

[P1 Infinite MP]
580F0000 076A5120
780F0000 00000098
640F0000 00000000 00030D40

is there any solution?

 

[TomSwitch]

I Try every range..but still nothing process, This is the code that i want to update :

[P1 HP Max ]
580F0000 076A5120
580F1000 00000010
780F0000 000010B4
640F0000 001053B0 000005DC

[P1 Infinite MP]
580F0000 076A5120
780F0000 00000098
640F0000 00000000 00030D40

is there any solution?

These two are super easy. For the first one depth of 2, range 10B4. Second one depth of 1, range 98
You can set the num_offsets to a big number as the depth is so shallow. In case the range has increase you may want to set say range of 2000, depth of 2, num_offsets 100

 

[WiduraGoez]

These two are super easy. For the first one depth of 2, range 10B4. Second one depth of 1, range 98
You can set the num_offsets to a big number as the depth is so shallow. In case the range has increase you may want to set say range of 2000, depth of 2, num_offsets 100

thank you for your help..it just i still learning how to make a cheat code..thank you for all the guidance..for the range you mean set to : 0x2000...0r ..0x0200

 

[dsrules]

thank you for your help..it just i still learning how to make a cheat code..thank you for all the guidance..for the range you mean set to : 0x2000...0r ..0x0200

set the range bigger than whatever the largest offset is
580F1000 00000010
780F0000 000010B4

 

[WiduraGoez]

set the range bigger than whatever the largest offset is
580F1000 00000010
780F0000 000010B4

Thank you so much for all the help..at last i find the pointer....and also upgrade my knowledge..Thank you so much

 

[blackfalcon2525]

I'm currently using Breeze beta89.
I started the game, opened Breeze, and was able to access the Advance Cheat Menu, but a while ago I was no longer able to access it.
There is a txt with the code in each BID folder in switch → brezze → cheats.

Current switch environment
FW：18.0.0
cfw:atmosphere-1.7.0-prerelease
Hekate: hekate_ctcaer_6.1.1_Nyx_1.6.1
atmosphere→contents
"420000000000000F"
"0100000000001013"
"010000000000000d"
"420000000007E51A"
"010000000000d609"
"054e4f4558454000"

Since this has never happened to me before, I was at a loss as to how to deal with it.
It would be helpful if you could let me know if there is any other information you need.

Post automatically merged: Apr 3, 2024

When I switched to the previous version, Breeze Beta88f, the symptoms were resolved.

 

[TomSwitch]

I'm currently using Breeze beta89.
I started the game, opened Breeze, and was able to access the Advance Cheat Menu, but a while ago I was no longer able to access it.
There is a txt with the code in each BID folder in switch → brezze → cheats.

Current switch environment
FW：18.0.0
cfw:atmosphere-1.7.0-prerelease
Hekate: hekate_ctcaer_6.1.1_Nyx_1.6.1
atmosphere→contents
"420000000000000F"
"0100000000001013"
"010000000000000d"
"420000000007E51A"
"010000000000d609"
"054e4f4558454000"

Since this has never happened to me before, I was at a loss as to how to deal with it.
It would be helpful if you could let me know if there is any other information you need.

Post automatically merged: Apr 3, 2024

When I switched to the previous version, Breeze Beta88f, the symptoms were resolved.

beta89 and beta88f is mostly identical, beta89 check that you are on atm 1.7 and above or it won't install gen2 fork cause it will crash for lower atm. Could be the sequence of what you did, probably if you reinstall beta89 would have the same result

 

[blackfalcon2525]

beta89 and beta88f is mostly identical, beta89 check that you are on atm 1.7 and above or it won't install gen2 fork cause it will crash for lower atm. Could be the sequence of what you did, probably if you reinstall beta89 would have the same result

As it is, use Breeze Beta88f.
Thank you very much for your help.

Just to be sure, we had installed all the latest versions of the software, but are there any folders in atmosphere → contents that we had to delete?
The following six folders were included.

"4200000000000000000F"
"01000000000000001013"
"0100000000000000000d"
"4200000000000007E51A"
"0100000000000000d609"
"054e4f4558454000"

Was this a condition that would have originally worked in Breeze beta89 as it is?
I was also checking because I was in a hurry and wondered if there was something I needed to delete.

 

[TomSwitch]

As it is, use Breeze Beta88f.
Thank you very much for your help.

Just to be sure, we had installed all the latest versions of the software, but are there any folders in atmosphere → contents that we had to delete?
The following six folders were included.

"4200000000000000000F"
"01000000000000001013"
"0100000000000000000d"
"4200000000000007E51A"
"0100000000000000d609"
"054e4f4558454000"

Was this a condition that would have originally worked in Breeze beta89 as it is?
I was also checking because I was in a hurry and wondered if there was something I needed to delete.

Don't know what is

"4200000000000007E51A"

The first and the last are included but not activated, the others are optional ones that you can ask Breeze to install

 

[blackfalcon2525]

I downloaded and was using the latest version of Breeze89j_1, but for some reason I installed both with "install gen2 fork" and "install dmnt fork", but when I ran "setBreakPoint" and then pressed "Gen2Attach", I got the message "Version mismatch Please goto settings to install gen2 fork" and couldn't proceed.

I'd already installed the latest version of everything, so is there any possibility this could be the case?

The issue mentioned above regarding being unable to access the Advance Cheat Menu has been resolved.

Post automatically merged: Apr 27, 2024

I found the cause. Thank you.

 

[DeathReaper666]

I downloaded and was using the latest version of Breeze89j_1, but for some reason I installed both with "install gen2 fork" and "install dmnt fork", but when I ran "setBreakPoint" and then pressed "Gen2Attach", I got the message "Version mismatch Please goto settings to install gen2 fork" and couldn't proceed.

I'd already installed the latest version of everything, so is there any possibility this could be the case?

The issue mentioned above regarding being unable to access the Advance Cheat Menu has been resolved.

Post automatically merged: Apr 27, 2024

I found the cause. Thank you.

having the same issue on the latest atmosphere was hoping if its not too much of an issue if you could explain what the cause was maybe its the same for me thanks

 

[Rockfello]

Thanks as always for your commitment and sharing your work. I would like to know if by installing this I’ll get that nice cheat menu as shown in the pictures. Also, because I’m on the phone I’m. It able to see the download link.

Cheers.