Search results

  1. E

    Weird Stick Drift after changing to Hall Effect Sticks

    Hey guys, my Dual Sense controller just had a Stick drift in the first place. Every time I just moved my left stick to the right, the right stick suddenly shifted mildly to the left. In Games like Fifa it just runs in the opposite direction sometimes when you sprint. I decided to change the...
  2. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks for the advice! I was too lazy too and just moved the wires a little bit, then the OFW started and the error was gone. Now im getting the 200mb error only when i open Console Log twice ( on the first error its still 400), but booting OFW works flawlessly. I will add the resistor today and...
  3. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hey guys EDIT: Could update it through payload picofly_toolkit. Now im facing the next issue FML. When i go to console Info on Hekate it says eMMC is runing on lower mode but is still 400Mb. When i go out and revisit the console info it drops to 200 mb. The OFW seems also not starting. CFW...
  4. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Quick question guys. My Pico zero has already detached usb c and buttons. I was on fw 2.5 i think. I think i should update, when there is a new firmware, like 2.67 right now, for my pico zero, but how can i do that? resolder usb c?
  5. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Works ! Thank you so much. Last time after getting it done, the battery wasn't charging and after it shut down I got blue purple. Now I'm testing that again. Hope it works this time. Again thank you so much for your help !
  6. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    That helps a lot man, thank you so much. Need to try it out tomorrow. What exactly do you describe on the yellow lines? The "S" is still the GND right?
  7. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Can someone tell me how I can solder a V2 flex cable for a v1 switch? Where exactly I need to solder it? Since it worked once I couldn't solve the Led purple problem. I know it's because CMD / V2 flex but couldn't find a solution. Maybe it was luck I don't know.
  8. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Seems like I was happy too early. Gave the switch my wife so that she can play some and after hitting low battery the picofly called the blue purple color and didnt turn on. Seems like i need to open that up again and check whats the issue.
  9. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Finally it worked! I just soldered different solder points following this tutorial and this was my solution for my v1 switch I also kinda user the flex V2 and worked too.
  10. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi, is there any other point where I can solder DAT0, 3,3v and GND for v1 Switch? I think after soldering so much I should try other pinpoints. I kind of got my switch back working and yeah when I still use the same soldering points I still get blue cyan.
  11. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    After installing the right transistors, I am still getting the same error. I decided to put the pics off and try to boot the switch without the pico. Now it’s not getting any power. I think I need to solve that problem first. Any suggestions where I should look maybe?
  12. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Alright, so I ordered from the third one and this is what I got. 47R0, hope that's the right ones now :D
  13. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Is this the right one? I feel like it’s hard to find it in Germany :D https://www.reichelt.de/de/de/smd-widerstand-0805-47-ohm-125-mw-1--smd-0805-47-0-p32870.html?PROVID=2788&gclid=EAIaIQobChMIn93ioIvB_gIVSqJ3Ch1IsQHgEAQYASABEgKFR_D_BwE&&r=1...
  14. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    This is the result of my resolder job. Now I’m getting blue purple So I need to buy another resistor? Thought these were the right
  15. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi guys, so i just managed to get a step further. The LED in the Zero is now blinking blue Pink. Any suggestions on what I can check? I already checked the solders on CMD/CLK. I use these thin cupped wires. Should I maybe use a thicker cable? Or is it maybe the Flex cable I’m using ?
  16. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    So i have the next issue, maybe someone here can help me. For a short time, my switch wasnt working completely. no charging, etc. After fixing the brigde at DAT0 it was finally booting again, but only screen light and nothing else. fan isnt turning and yeah basically thats it. Someone any idea...
  17. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks!
  18. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    I bought these:https://de.aliexpress.com/item/32751260857.html?spm=a2g0o.new_account_index.0.0.580376c7xt3MTT&gatewayAdapt=glo2deu Shit. Thanks for the quick help.
  19. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    No typo. Its the 471 written on the resistors :D saw it somewhere and bought it. Seems like its the wrong one them? I resoldered Dat0. Couldnt find the issue there
  20. E

    Hacking Hardware Picofly - a HWFLY switch modchip

    Guys i just installed Picofly but when I boot, I get a blue yellow light and then it just boots normal to the OFW. Anyone can tell me what i should check? I am also using the 471 ohm transistors. Maybe thats the reason?