Search results

  1. B

    Hardware Need voltage readings from a working Oled Switch

    Hi all, I have a faulty Oled that doesn't turn on or take a charge. Compared to my Mariko boards, the voltage drop on the Vsys line is very low @ 0.08 but nothing heats up when I inject voltage. When I tried to turn it on w Retrosix's method using a bench powersupply, it would take up to...
  2. B

    Hardware HAC CPU 1.0 - need resistor value

    Thanks studioai' I'll try a 100k and see if that works... although I'd be happier with a 95k resistor but couldn't find one on a donor board
  3. B

    Hardware HAC CPU 1.0 - need resistor value

    Hi all, Could someone tell me what the value of the resistor is under the max17050 on the 1.0 mainboard? (under the battery connector) I believe the value of this resistor varies on the different mainboard revisions.... Many thanks
  4. B

    Hardware How is LCD powered?

    Hi all, Would anyone happen to have any info on how the LCD is powered by the Switch. I'm aware IC 8316 to the left of the LCD connector provides the 5v/-5v, but I'm also reading -7v on another LCD pin and I can't figure out where it's coming from. Long story short, I've replaced the M92T36 and...
  5. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    The guy who made a tutorial on upgrading emmc recommended 390c-400c, but it looks like my hot air station is more powerful/more accurate than his. Ooopsies
  6. B

    Hardware Failed to init emmc - no drive under memloader and hackdiskmount

    I've removed the memory chip from the pcb and I'm going to try to read it by other means. I'm still waiting for the reader and bga stencil to arrive from China. I'll keep you posted.
  7. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    The component that used to reside where the purple circle is. Thanks for your help!
  8. B

    Hi mattytrog, could i ask for your advice on a 'failed to init emmc' Switch? (I don't think i...

    Hi mattytrog, could i ask for your advice on a 'failed to init emmc' Switch? (I don't think i can pm you)
    • B_N_B
    • Profile post
  9. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    Sucks to be me then. .... Maybe I should try replacing the resistor that I knocked off the pcb rather than replace the whole board.
  10. B

    Hardware Failed to init emmc - no drive under memloader and hackdiskmount

    Hi All, I'm looking for a little advice. I have acquired two Switches both with the "failed to init emmc" error and nothing shows up when I try to mount the drives via memloader and hackdiskmount. I do not know the history of the two consoles; I am merely trying to repair them. When I swap...
  11. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    Basically, I have had to remove the nand from the board and I damaged the board during the removal process. I think buying a new board with the nand is overkill when all I need is the board which is worth no more than $1-$2. Any suggestions?
  12. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    Are you telling me all the ppl selling homemade 256gb and 128gb modules on these forums buy the entire module with the 32gb NAND?
  13. B

    Hardware Switch NAND upgrade

    Yes that board without the nand chip
  14. B

    Hardware Switch NAND upgrade

    The NAND requires soldering
  15. B

    Hardware Switch NAND upgrade

    Hi Onlyd, do you have any idea where i could purchase the memory module board from without the nand chip?
  16. B

    Hardware Switch NAND upgrade

    I'm also looking for the little board the nand sits on. Any luck?
  17. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    I'm talking about the little pcb the nand sits on
  18. B

    Hardware Where to buy standalone emmc module (without memory chip)?

    Hi All, question is in the subject line. If anyone could point me to a seller than that would be much appreciated. Thanks!
  19. B

    Hardware Need help figuring out if Tegra is shorted

    Hi Pintglass, the cap appears to be shorted to ground. Have you come across this fault before? Although I'm not sure if this short has anything to do with e.g. the battery not charging. Thanks
  20. B

    Hardware Need help figuring out if Tegra is shorted

    And the bucks are controlled by the max77620? What voltage are they supposed to output?
General chit-chat
Help Users
  • No one is chatting at the moment.
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/watch?v=KYZD7ykz9aQ