Had anyone fw 9.0.1 and atmosphere 0.9.4 installed? I had updated my atmosphere from 0.9.3 to 0.9.4 then i updated my emummc with choinx from 8.0.1 to 9.0.1. After a reboot i only get a black screen after the atmosphere logo, no error or something else. I cannot use switchboot 1.5, emummc and fw...
Hello Guys,
today i need your help. I installed a Trinket M0 in my Switch. Plus and USB Strap are soldered.
Now my problem:
I want to updated the Trinket, so i started the cfw, connected the usb cable and put the switch to standby.
After this a Uf2 device popup, i put Part 1 (Perma CFW) to the...
A 128GB EMMC KLMDGAGEAC-B001 cost on Aliexpress.com only 33$ USD and a replacement board 16$ USD. I think 175$ for a reflowed 128GB is to expensive. But when you can sell it, just do it :D
I found on mouser.de a SDINBDA4-256G for 157€ without shipping. But i think its to expensive.
@g00s3y
Do you are eXtremeRate on Amazon?
https://www.amazon.de/eXtremeRate-Komplett-Ersatzteile-Werkzeug-Nintendo-Chrome-Golden/dp/B07PN35QG4/ref=sr_1_8?ie=UTF8&qid=1553525512&sr=8-8&keywords=nintendo%2Bswitch%2Bbuttons&th=1
Why you want use the "plus" button?
Just use the eject button. You only need a 2*3*0.6mm button, some wire, a soldering iron and 2 screwdrivers.
When you need a link for 2*3*0.6mm button pm me ;)
https://gbatemp.net/threads/joy-con-mod-eject-button-as-switch-for-rcm.509405/
@mattytrog
My switch only boots to OFW when i connect the switch to my pc and press power button.
Without any connection to the pc, it works perfect.
Straps are all fitted right. I checked it twice.
I used (SWITCHBOOT_v1.0_TRINKET_JOYCON_VOLUME) and (TRINKET_REBUG_SWITCHBOOT_v1.0_PART2)...
@xstre pwnsx
I think you need a replacement mainboard or a broken one where you can desolder the chip.
You should look at Aliexpress.com for a replacement chip or buy a broken switch.
@mattytrog
I'm sorry it was my fault. I don't copy the ini files and the /uboot/ directory. Now it works.
Now i have another question. When my switch is connected and i press power, my switch boot to OFW. Why?
I have a question.
I had fitted my Trinket M0 with Joycon-, USB Disconnect- and Vol+ Strap.
Actual switchboot and simple uf2 is installed, but i can't use payload memloaderv3 to mount my switch for NxNandManager.
Memloader says it found no connection to pc.
It's normal?
@jeb101
You can solder from vol + button to testpad G4, it should work and is easyier. But i don't know if you need the killed resistor (i measured my, it's 150 Ohm) between your lifted pad and the other one. Do you have a voltmeter?
Vol - is testpad E1, i think.
auto
@sourpickel
I can't...
@jeb101
Please show us a picture. :)
You can try it or your can check continuity from your broken trace to testpad G4.
Disconnect the battery before you measure.
@xstre pwnsx
You could check continuity from the ribbon cable latch to the contacts at the joycon rail.
Solder like me. It works, trust me ;)
You could solder on a alternative vol + solderpad. On the backside of switch maiboard you have testpadcluster G, G4 is testpad for vol +. Solder there.
Sry i don't got any notification.
@xstre pwnsx
With my method you can bridge the trace so you don't need to repair it.
I can't repair the trace because my soldering iron and wire was to big for this little trace.
When you can't fit 2 wires on one pad, solder from joycon rail pin 10 to pin 3 on...
@xstre pwnsx
I leaved them as they are. You bridges the broken pads with my method. When you want you can measure with a multimeter the resistance from broken pads (when you see some copper) to testpad G9. You will see a resistance under 0,5 Ohm.
Very important! --> Check every strap you...
Hello guys,
@xstre pwnsx
@mattytrog
@barnhilltrckn
so im finished. I'm fixed my issue. For everybody who have the same problem like me (joycon strap lifted little solder pads and don't have any connection, no RCM and switch don't check if joycon connected). On the backside of switch mainboard...
"Start your day with Cup Noodles Breakfast! This limited time flavor blends ramen with your favorite breakfast flavors, including pancakes, maple syrup, sausage, and eggs."