Search results

  1. Marax

    Hacking Hwfly Switch v2 Blue screen

    Nah i just bought a new one with broken display and replaced the Board....
  2. Marax

    DSI XL Yellowing display still after replacement

    I now desoldered the ribbon connector cable and solder es in a new one from an dsi with broken nand. And exactly the same.... Idk i think the board is just broken. Maybe its just a small cap or smth but i habe no more clue for this one.
  3. Marax

    DSI XL Yellowing display still after replacement

    That might be the problem but i dont have the shematics to look deeper into this. This machine might need a new Board. But i spend way too much on it. I bought 2 new screens because i thought the second one was defective. Very annoying.
  4. Marax

    DSI XL Yellowing display still after replacement

    It was not the connector i thought it was when i putted my finger on the connector and I changed colors but I think it had something to do with the resistense of my finger. So this might be some Motherboard error but I have no clue where I can start
  5. Marax

    DSI XL Yellowing display still after replacement

    The replacement screen is installed now but the issue remains... Might be a damaged mainboard and i have no clue where it is damaged. Okay i found the issue is the ribbon connector on the Board.
  6. Marax

    DSI XL new bottom display protective film?

    Hello, Ive ordered a new DSI XL Display and im not sure if it has a protective layer on it that i need to pull off... Maybe someone know i dont want to risk to destroy the display
  7. Marax

    DSI XL Yellowing display still after replacement

    Thank you guy I think I found the issue. I pressed a bit on the flex cable and the wibbled on the screen i think that’s the issue … AliExpress screen …. I think I need some micro soldering it is broken on one trace on the side and I didn’t see it because it’s so small
  8. Marax

    DSI XL Yellowing display still after replacement

    Hello, I got a DSI XL a few weeks ago and the bottom Display had this Yellow touch. The Potentiometer couldn’t do anything so I bought a new screen and digitizer. Now after replacement it’s still the same so maybe it’s not the screen. Do someone know about this? This was before the...
  9. Marax

    Switch Lite prodinfo color change

    It has a Picofly installed. But this is not that helpful you can’t choose the color while making a prodinfo. I want to change it with hex editing but i don’t know the values to do so…
  10. Marax

    Switch Lite prodinfo color change

    Can no one help me?
  11. Marax

    Switch Lite prodinfo color change

    Hello, i changed the motherboard of my switch lite. The Motherboard is from a yellow unit and I now is in a coral housing and I would like to have the console show the coral color on the controller section. Maybe someone can help me to edit my prodinfo to change the color.
  12. Marax

    Help Change Switch Lite Color?

    I changed the Mainboard from a Yellow Switch Lite to an Coral one. Now the Controller says its Yellow and i would like to change that. Picofly is installed. Can someone help me with the Values?
  13. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you guys for your help! My Switch now runs fine it was the Heatshield which had too much pressure on the Chip now the switch runs fine! Thank you @Dee87 espacially! The new chip runs perfect und the two caps too! I am very happy
  14. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    I got the Switch Lite working with the new Waveshare chip and FW 3.75. I created an Emunand and installed a Game but the switch randomly reboots/shuts down and boots ofw the chip then tries to glitch…
  15. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    I did a video on how the chip behaves I resoldered it now a few times… He does this since the shutdown with slow mmc…. Edit: I get 260ohms on the RST point with cable connected to chip no Battery. This is not right. What can cause this? With no wire to the chip it seems normal with 1600ohms...
  16. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    I really need help.. I resoldered all the wires to the chip this time with the 47 ohms on dat0 and cmd but again first it tries to glitch then it gives 2 short pulse yellow then short break and again 2 short pulse yellow after that nothing. Idk anymore… On RST I get 1600ohms without cable and...
  17. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    Today I got my 0,1mm wire and soldered and replaced the flex cable with it! But first without the 47ohms caps for testing. And it booted into Hekate I tried to go into Emmc and no slow error and booted successfully into ofw trough hekate. I thought it was only bad wiring first and I don’t need...
  18. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    I will rewire the Flexcable with the 0,01mm wire i bought will arrive soon hopefully. So its fine i guess i will just use the 47 ohms resistor and solder it onto the the Pads... I think this will be better. Yes i could done this but i was too stupid to realize in the moment haha Thank you :)
  19. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    Sorry i just wanted to sort things out because of the desaster last time with the Board. Thank you for your help man! Next time i will use a normal Pico Zero from Waveshare. This time i have a Nand Backup BOOT1 and BOOT2 and Keys... I started into hekate and this time no error with EMMC. I...
  20. Marax

    Hacking Hardware Picofly - a HWFLY switch modchip

    You really think that’s the issue? Couldn’t it be my soldering? Because first I could backup the nand and boot ofw trough hekate with no problems. Now OFW doesn’t want to boot and atmosphere gives error with emmc Are there some 47ohm ones on the switch lite board I can take from my donor board...
General chit-chat
Help Users
    K3Nv2 @ K3Nv2: https://youtube.com/shorts/fRENPoVaZHk?si=0xgCyaSVzuc5GD5F